[Code of Federal Regulations] [Title 40, Volume 27] [Revised as ofJuly 1, 2003] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR426.122] [Page 43] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 426--GLASS MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart L--Incandescent Lamp Envelope Manufacturing Subcategory Sec. 426.122 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in Secs. 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) Any manufacturing plant which produces incandescent lamp envelopes shall meet the following limitations with regard to the forming operations. ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed- - ------------------------------------------------------------------------ Metric units (g/kkg of furnace pull) ------------- Oil....................................... 230.0 115.0 TSS....................................... 230.0 115.0 pH........................................ (\1\) (\1\) ------------- English units (lb/1,000 lb of furnace pull) ------------- Oil....................................... 0.23 0.115 TSS....................................... 0.23 0.115 pH........................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0. (b) Any manufacturing plant which frosts incandescent lamp envelopes shall meet the following limitations with regard to the finishing operations. ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed- - ------------------------------------------------------------------------ Metric units (g/kkg of product frosted) ------------- Fluoride.................................. 230.0 115.0 Ammonia................................... (\1\) (\1\) TSS....................................... 460.0 230.0 pH........................................ (\2\) (\2\) ------------- English units (lb/1000 lb of product frosted) ------------- Fluoride.................................. 0.23 0.115 Ammonia................................... (\1\) (\1\) TSS....................................... 0.46 0.23 pH........................................ (\2\) (\2\) ------------------------------------------------------------------------ \1\ No limitation. \2\ Within the range 6.0 to 9.0. [40 FR 2959, Jan. 16, 1975, as amended at 60 FR 33960, June 29, 1995]