Research Triangle Park, North Carolina
Main Building
Total Facility Area: 1,042,611 gross square feet (GSF)
Estimated Personnel: 2,030 persons
Energy Consumption: 350,940,565,102 Btu per year
Btu per GSF per Year: 336,598
Total Water Consumption: 53,067,954 gallons per year
Gallons per GSF per year: 51
All energy and water data are reported as of FY 2007.
2007 Energy Partner of the Year Award Winner
Description
EPA has completed construction of this new consolidated laboratory and office complex. The facility, which was fully occupied in January 2003, houses the Office of Research and Development, the Office of Air Quality Planning and Standards, and the Office of Administration and Resources Management.
In addition to this facility, EPA occupies several other buildings in the Research Triangle Park area, including:
- Human Studies Facility
- First Environments Early Learning Center
- National Computer Center
- National Health and Environmental Effects Research Laboratory
Unique Environmental Features
Energy Conservation
- In March 2006, EPA completed two comprehensive recommissioning projects in the laboratory and vivarium wings of the RTP Main building. Both the Laboratory Controls Optimization Project (LCOP) and Vivarium Controls Optimization Project (VCOP) significantly reduced airflow demands by safely adjusting the occupied and unoccupied supply and exhaust requirements for each laboratory module. Together, these two projects have contributed to energy savings of more than 10 percent compared to FY 2004 energy consumption.
- In FY 2007, EPA completed the first two phases of a multi-phase project to optimize air handling in the facility’s office wings. As part of this project, EPA completed upgrades to the air handling system and began optimizing the downstream air handling distribution network. The Agency is currently implementing a pilot project on one AHU to study the overall impacts and payback of the downstream recommissioning. EPA also started the design of office tower recommissioning work and provided funding for the project. In FY 2008, EPA expects to finish the design of the commissioning project and begin the implementation of the pilot.
- Dependable air supply in the Main building originally required the constant operation of five air handling units (AHUs). Following LCOP and VCOP, the RTP team implemented the Static Pressure Optimization and Reduction Test (SPORT) and determined that only two to three AHUs would typically be needed to maintain static pressure in the laboratories and ensure safe ventilation. This adjustment allowed EPA to further optimize the energy savings achieved by LCOP and VCOP.
- As a follow-up to LCOP, VCOP, and SPORT, in December 2006 EPA completed a laboratory ventilation management plan (LVMP), which documents all of the work completed in LCOP, VCOP, and SPORT. The LVMP also compiled helpful screenshots from the building automation system to help EPA’s operations and maintenance contractors perform continuous commissioning and further optimize energy savings already realized.
- In FY 2007, EPA continued work on a multi-year controls master plan. In this initial year, EPA strengthened the backbone of the building automation system to improve data transmission, retention, and quality. In FY 2007, EPA continued to optimize the data flow by breaking long strings of control modules into smaller clusters. Upon completion of this project, EPA expects to reduce energy consumption by approximately 2 percent below FY 2006 consumption.
- A lighting control/automatic shutoff system was phased in from June to October 2003, reducing the amount of electricity needed for lighting in the Main Building.
- Since FY 2003, fume hoods have been serviced by a centralized variable air volume supply and exhaust system. The fume hoods are equipped with control features such as "night setback" which allows for a reduction in airflow during unoccupied hours. Energy is saved by reducing the need to cool or heat outside air and run the fans during unoccupied hours.
Green Power
- In FY 2008, EPA continued to support the renewable energy market by purchasing green power through two separate Agencywide blanket contracts for a combined total of 380 million kilowatt hours (kWh) of renewable energy certificates (RECs), or “green tags,” from Sterling Planet, Luminant Energy Company, and FPL Energy. These purchases will allow EPA to offset 100 percent of electricity consumption for FY 2008 and the first half of FY 2009 at the Main Building, as well as many other EPA facilities across the Agency. Procured through the Defense Energy Support Center, these contracts support renewable energy generation from wind and biomass resources in nine states.
- On November 1, 2004, EPA entered into a three-year agreement with Unicoi Energy Services, to purchase 100 million kilowatt hours (kWh) of green power in the form of renewable energy certificates (RECs) annually. The new contract will help support the generation of biomass power from paper pulp facilities in Port Wentworth, Georgia. The purchase offsets 100 percent of the electricity consumption at all of EPA's RTP facilities, including the Main Building. This contract replaces two previous contracts that provided 30 million kWh of green power from wind and landfill gas in FY 2003.
- In September 2003, EPA finalized two contracts to supply the RTP campus with 30 million kWh per year of green power. As part of contracts awarded by the Defense Energy Support Center , Sterling Planet of Alpharetta, Georgia, supplied EPA with 20 million kWh of RECs generated at a landfill gas facility in Jacksonville, Florida, and 3 Phases Energy Services of San Francisco, California, supplied EPA with 10 million kWh of RECs from wind power generated in Algona, Iowa.
- EPA is also supporting the generation of green power through the NC Green Power Program. The NC Green Power program is a new statewide program developed by the state Public Utility Commission to allow all North Carolina electricity customers to purchase green power.
Green Building
- EPA selected building materials that are durable, low-maintenance, and have the least environmental impact over each material's life cycle. Design plans for this facility included detailed requirements regarding the minimum recycled content of building materials. Some of the products with recycled content included rubber flooring, ceramic tiles, asphalt paving, concrete, insulation, wood fiberboard, gypsum wallboard, and steel.
Water Conservation
- EPA incorporated water-efficient fixtures throughout the facility, including flow-restricting nozzles, automated shutoff, and hot and cold water delivery systems with automatic temperature controls. The lavatories have sensor operated metered faucets that regulate the amount of water flow, which will save both water and the energy needed to heat it.
Stormwater Management
- Stormwater runoff is naturally treated by plant material onsite to remove contaminants. Bioretention cells are also used to absorb, filter, and slow runoff. Natural woodlands and wildflower plantings are used in place of turf grass to minimize the use of water, fertilizer, and pesticides. For more information, see Stormwater Management at EPA Facilities.
For More Information
- For more information on the new RTP facility, read Leading By Example (PDF) (78 pp, 1.3MB, About PDF), an EPA case study that describes RTP's environmental features.
Contact
Steve VanHorn (vanhorn.steve@epa.gov)
U.S. EPA
Mail Code: C604-02
Research Triangle Park, NC 27711
Phone: (919) 541-5446
Web site: www.epa.gov/rtp