Removal of Arsenic From Drinking Water Using a Novel Hybrid Sorbent
EPA Contract Number: 68D02098Title: Removal of Arsenic From Drinking Water Using a Novel Hybrid Sorbent
Investigators: Saha, Anuj K.
Small Business: VEETech PC
EPA Contact: Manager, SBIR Program
Phase: I
Project Period: October 1, 2002 through July 31, 2003
Project Amount: $99,852
RFA: Small Business Innovation Research (SBIR) - Phase I (2001)
Research Category: SBIR - Water , Water and Watersheds
Description:
VEETech, in conjunction with Lehigh University, will synthesize and test novel hybrid sorbents (HIXs) for the removal of arsenic from drinking water. The HIXs are polymeric/inorganic hybrid sorbents in which cation exchange resin beads are irreversibly and uniformly coated with hydrated ferric oxide (HFO) materials. The HIXs are expected to demonstrate superior selectivity and capacity over other exchange materials used for removal of arsenic contaminants. Unlike other treatment processes, the HIXs do not require any pre- or post-treatment, and they are not expected to alter the quality of the treated water.
This project will entail the synthesis of three different HIXs and determine their relative distribution coefficients (Kd) for the arsenic species. The HIX medium exhibiting the highest Kd will be selected for kinetic testing. Following the kinetic testing, the HIX will be utilized to perform a dynamic column test to determine bed breakthrough. Following the bed breakthrough, regeneration and rinsing tests will be performed to determine the long-term bed usage and to ascertain the potential cost for the treatment approach. Finally, a detailed test report will be prepared to describe and document the entire test protocol with results and future activities.
Arsenic poisoning from drinking water is a major global concern. In the United States, there currently are several drinking water supply systems that frequently exceed the 60-year-old arsenic maximum concentration limit (MCL) of 50 µg/L. In the coming years, the MCL for arsenic is expected to be lowered to 10 µg/L, a level that is more consistent with other developed nations. Arsenic is found in the drinking water systems as both III and V species. The arsenic III forms are non-ionic and remain oxyacids, while the V forms remain oxyanions. Both forms are acutely toxic to all warm-blooded, living beings.
Arsenic can be removed from drinking water in the following ways:
Activated alumina sorption
Polymeric anion exchange
Sorption by ion oxide-coated sand and zeolite particles
Enhanced coagulation with alum or ferric chloride followed by microfiltration
Pressurized granular ion particles and iron-doped alginate
Manganese dioxide-coated sand
Polymeric ligand exchange
Zero valent iron.
Each of the above technologies has relative advantages and disadvantages, but all of them have a few major drawbacks, such as:
Limited capacity-the capacity of the technologies are limited in terms
of feed throughput or bed volumes.
Lack of selectivity-the technologies are not particularly selective for
the two forms of arsenic species and may prefer to treat other competing ions.
Requirement for pre- and post-treatment-the treated water often requires
pre- and post-treatment (in the forms of chemical addition) to maintain water
quality.
Non-removable arsenic III species-the arsenic III oxyacids are not removed
by the technologies, thus providing an incomplete arsenic removal.
Expensethey are relatively expensive to operate.
The HIXs developed from this study alleviate all of the drawbacks listed above. The HIXs are prepared by uniformly coating cation exchange polymer beads with HFO. The HIX can be used in a fixed-bed sorption exchanger and can treat the water for numerous bed columns. The HIX is extremely selective for both forms (III and V) of arsenic species and does not capture the competing ions. The HIX beds do not alternate water quality, and no pre- or post-treatment is required. The HIX fixed-bed technologies are extremely cost-effective and easy to operate and maintain.
Commercialization of the HIX-based fixed-bed arsenic removal technologies can benefit the numerous drinking water utilities affected by arsenic concentrations in excess of the MCL. The technology can be configured as a permanent or mobile system. The basic components are one or two columns and a small number of tanks and pumps. The HIX system also can be retrofitted as a polishing unit downstream of the existing water distribution system. The technology also has very good export potential to the countries suffering from acute arsenic toxicity.
Supplemental Keywords:small business, SBIR, EPA, arsenic, drinking water, novel hybrid sorbents, HIX, oxyacid, oxyanion, hydrated ferric oxide. , Water, Scientific Discipline, RFA, Arsenic, Drinking Water, Analytical Chemistry, Environmental Engineering, Environmental Chemistry, Environmental Monitoring, drinking water system, drinking water contaminants, treatment, arsenic exposure, risk management, Safe Drinking Water, arsenic removal, monitoring, contaminant removal, public water systems, drinking water treatment, arsenic contaminated sediment, water treatment, sorbents, best available technology, chemical contaminants, community water system
Progress and Final Reports:
Final Report
Removal of Arsenic From Drinking Water Using a Novel Hybrid Sorbent