|
|
|
Title 30--Mineral Resources
CHAPTER II--MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR
PART 250--OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF
|
|||
 |
 | 250.101 | Authority and applicability. |
|
|
| 250.102 | What does this part do? |
|
|
| 250.103 | Where can I find more information about the requirements in this part? |
|
|
| 250.104 | How may I appeal a decision made under MMS regulations? |
|
|
| 250.105 | Definitions. |
|
|
| 250.106 | What standards will the Director use to regulate lease operations? |
|
|
| 250.107 | What must I do to protect health, safety, property, and the environment? |
|
|
| 250.108 | What requirements must I follow for cranes and other material-handling equipment? |
|
|
| 250.109 | What documents must I prepare and maintain related to welding? |
|
|
| 250.110 | What must I include in my welding plan? |
|
|
| 250.111 | Who oversees operations under my welding plan? |
|
|
| 250.112 | What standards must my welding equipment meet? |
|
|
| 250.113 | What procedures must I follow when welding? |
|
|
| 250.114 | How must I install and operate electrical equipment? |
|
|
| 250.115 | How do I determine well producibility? |
|
|
| 250.116 | How do I determine producibility if my well is in the Gulf of Mexico? |
|
|
| 250.117 | How does a determination of well producibility affect royalty status? |
|
|
| 250.118 | Will MMS approve gas injection? |
|
|
| 250.119 | Will MMS approve subsurface gas storage? |
|
|
| 250.120 | How does injecting, storing, or treating gas affect my royalty payments? |
|
|
| 250.121 | What happens when the reservoir contains both original gas in place and injected gas? |
|
|
| 250.122 | What effect does subsurface storage have on the lease term? |
|
|
| 250.123 | Will MMS allow gas storage on unleased lands? |
|
|
| 250.124 | Will MMS approve gas injection into the cap rock containing a sulphur deposit? |
|
|
| 250.125 | Service fees. |
|
|
| 250.130 | Why does MMS conduct inspections? |
|
|
| 250.131 | Will MMS notify me before conducting an inspection? |
|
|
| 250.132 | What must I do when MMS conducts an inspection? |
|
|
| 250.133 | Will MMS reimburse me for my expenses related to inspections? |
|
|
| 250.135 | What will MMS do if my operating performance is unacceptable? |
|
|
| 250.136 | How will MMS determine if my operating performance is unacceptable? |
|
|
| 250.140 | When will I receive an oral approval? |
|
|
| 250.141 | May I ever use alternate procedures or equipment? |
|
|
| 250.142 | How do I receive approval for departures? |
|
|
| 250.143 | How do I designate an operator? |
|
|
| 250.144 | How do I designate a new operator when a designation of operator terminates? |
|
|
| 250.145 | How do I designate an agent or a local agent? |
|
|
| 250.146 | Who is responsible for fulfilling leasehold obligations? |
|
|
| 250.150 | How do I name facilities and wells in the Gulf of Mexico Region? |
|
|
| 250.151 | How do I name facilities in the Pacific Region? |
|
|
| 250.152 | How do I name facilities in the Alaska Region? |
|
|
| 250.153 | Do I have to rename an existing facility or well? |
|
|
| 250.154 | What identification signs must I display? |
|
|
| 250.160 | When will MMS grant me a right-of-use and easement, and what requirements must I meet? |
|
|
| 250.161 | What else must I submit with my application? |
|
|
| 250.162 | May I continue my right-of-use and easement after the termination of any lease on which it is situated? |
|
|
| 250.163 | If I have a State lease, will MMS grant me a right-of-use and easement? |
|
|
| 250.164 | If I have a State lease, what conditions apply for a right-of-use and easement? |
|
|
| 250.165 | If I have a State lease, what fees do I have to pay for a right-of-use and easement? |
|
|
| 250.166 | If I have a State lease, what surety bond must I have for a right-of-use and easement? |
|
|
| 250.168 | May operations or production be suspended? |
|
|
| 250.169 | What effect does suspension have on my lease? |
|
|
| 250.170 | How long does a suspension last? |
|
|
| 250.171 | How do I request a suspension? |
|
|
| 250.172 | When may the Regional Supervisor grant or direct an SOO or SOP? |
|
|
| 250.173 | When may the Regional Supervisor direct an SOO or SOP? |
|
|
| 250.174 | When may the Regional Supervisor grant or direct an SOP? |
|
|
| 250.175 | When may the Regional Supervisor grant an SOO? |
|
|
| 250.176 | Does a suspension affect my royalty payment? |
|
|
| 250.177 | What additional requirements may the Regional Supervisor order for a suspension? |
|
|
| 250.180 | What am I required to do to keep my lease term in effect? |
|
|
| 250.181 | When may the Secretary cancel my lease and when am I compensated for cancellation? |
|
|
| 250.182 | When may the Secretary cancel a lease at the exploration stage? |
|
|
| 250.183 | When may MMS or the Secretary extend or cancel a lease at the development and production stage? |
|
|
| 250.184 | What is the amount of compensation for lease cancellation? |
|
|
| 250.185 | When is there no compensation for a lease cancellation? |
|
|
| 250.187 | What are MMS' incident reporting requirements? |
|
|
| 250.188 | What incidents must I report to MMS and when must I report them? |
|
|
| 250.189 | Reporting requirements for incidents requiring immediate notification. |
|
|
| 250.190 | What reporting information and report forms must I submit? |
|
|
| 250.190 | Reporting requirements for incidents requiring written notification. |
|
|
| 250.191 | What accident reports must I submit? |
|
|
| 250.191 | How does MMS conduct incident investigations? |
|
|
| 250.192 | What evacuation statistics must I submit? |
|
|
| 250.193 | Reports and investigations of apparent violations. |
|
|
| 250.194 | How must I protect archaeological resources? |
|
|
| 250.195 | What notification does MMS require on the production status of wells? |
|
|
| 250.196 | Reimbursements for reproduction and processing costs. |
|
|
| 250.197 | Data and information to be made available to the public or for limited inspection. |
|
|
| 250.198 | Documents incorporated by reference. |
|
|
| 250.199 | Paperwork Reduction Act statements--information collection. |
|
|
| 250.200 | Definitions. |
|
|
| 250.201 | What plans and information must I submit before I conduct any activities on my lease or unit? |
|
|
| 250.202 | What criteria must the Exploration Plan (EP), Development and Production Plan (DPP), or Development Operations Coordination Document (DOCD) meet? |
|
|
| 250.203 | Where can wells be located under an EP, DPP, or DOCD? |
|
|
| 250.204 | How must I protect the rights of the Federal government? |
|
|
| 250.205 | Are there special requirements if my well affects an adjacent property? |
|
|
| 250.206 | How do I submit the EP, DPP, or DOCD? |
|
|
| 250.207 | What ancillary activities may I conduct? |
|
|
| 250.208 | If I conduct ancillary activities, what notices must I provide? |
|
|
| 250.209 | What is the MMS review process for the notice? |
|
|
| 250.210 | If I conduct ancillary activities, what reporting and data/information retention requirements must I satisfy? |
|
|
| 250.211 | What must the EP include? |
|
|
| 250.212 | What information must accompany the EP? |
|
|
| 250.213 | What general information must accompany the EP? |
|
|
| 250.214 | What geological and geophysical (G&G) information must accompany the EP? |
|
|
| 250.215 | What hydrogen sulfide (H2S) information must accompany the EP? |
|
|
| 250.216 | What biological, physical, and socioeconomic information must accompany the EP? |
|
|
| 250.217 | What solid and liquid wastes and discharges information and cooling water intake information must accompany the EP? |
|
|
| 250.218 | What air emissions information must accompany the EP? |
|
|
| 250.219 | What oil and hazardous substance spills information must accompany the EP? |
|
|
| 250.220 | If I propose activities in the Alaska OCS Region, what planning information must accompany the EP? |
|
|
| 250.221 | What environmental monitoring information must accompany the EP? |
|
|
| 250.222 | What lease stipulations information must accompany the EP? |
|
|
| 250.223 | What mitigation measures information must accompany the EP? |
|
|
| 250.224 | What information on support vessels, offshore vehicles, and aircraft you will use must accompany the EP? |
|
|
| 250.225 | What information on the onshore support facilities you will use must accompany the EP? |
|
|
| 250.226 | What Coastal Zone Management Act (CZMA) information must accompany the EP? |
|
|
| 250.227 | What environmental impact analysis (EIA) information must accompany the EP? |
|
|
| 250.228 | What administrative information must accompany the EP? |
|
|
| 250.231 | After receiving the EP, what will MMS do? |
|
|
| 250.232 | What actions will MMS take after the EP is deemed submitted? |
|
|
| 250.233 | What decisions will MMS make on the EP and within what timeframe? |
|
|
| 250.234 | How do I submit a modified EP or resubmit a disapproved EP, and when will MMS make a decision? |
|
|
| 250.235 | If a State objects to the EP's coastal zone consistency certification, what can I do? |
|
|
| 250.241 | What must the DPP or DOCD include? |
|
|
| 250.242 | What information must accompany the DPP or DOCD? |
|
|
| 250.243 | What general information must accompany the DPP or DOCD? |
|
|
| 250.244 | What geological and geophysical (G&G) information must accompany the DPP or DOCD? |
|
|
| 250.245 | What hydrogen sulfide (H2S) information must accompany the DPP or DOCD? |
|
|
| 250.246 | What mineral resource conservation information must accompany the DPP or DOCD? |
|
|
| 250.247 | What biological, physical, and socioeconomic information must accompany the DPP or DOCD? |
|
|
| 250.248 | What solid and liquid wastes and discharges information and cooling water intake information must accompany the DPP or DOCD? |
|
|
| 250.249 | What air emissions information must accompany the DPP or DOCD? |
|
|
| 250.250 | What oil and hazardous substance spills information must accompany the DPP or DOCD? |
|
|
| 250.251 | If I propose activities in the Alaska OCS Region, what planning information must accompany the DPP? |
|
|
| 250.252 | What environmental monitoring information must accompany the DPP or DOCD? |
|
|
| 250.253 | What lease stipulations information must accompany the DPP or DOCD? |
|
|
| 250.254 | What mitigation measures information must accompany the DPP or DOCD? |
|
|
| 250.255 | What decommissioning information must accompany the DPP or DOCD? |
|
|
| 250.256 | What related facilities and operations information must accompany the DPP or DOCD? |
|
|
| 250.257 | What information on the support vessels, offshore vehicles, and aircraft you will use must accompany the DPP or DOCD? |
|
|
| 250.258 | What information on the onshore support facilities you will use must accompany the DPP or DOCD? |
|
|
| 250.259 | What sulphur operations information must accompany the DPP or DOCD? |
|
|
| 250.260 | What Coastal Zone Management Act (CZMA) information must accompany the DPP or DOCD? |
|
|
| 250.261 | What environmental impact analysis (EIA) information must accompany the DPP or DOCD? |
|
|
| 250.262 | What administrative information must accompany the DPP or DOCD? |
|
|
| 250.266 | After receiving the DPP or DOCD, what will MMS do? |
|
|
| 250.267 | What actions will MMS take after the DPP or DOCD is deemed submitted? |
|
|
| 250.268 | How does MMS respond to recommendations? |
|
|
| 250.269 | How will MMS evaluate the environmental impacts of the DPP or DOCD? |
|
|
| 250.270 | What decisions will MMS make on the DPP or DOCD and within what timeframe? |
|
|
| 250.271 | For what reasons will MMS disapprove the DPP or DOCD? |
|
|
| 250.272 | If a State objects to the DPP's or DOCD's coastal zone consistency certification, what can I do? |
|
|
| 250.273 | How do I submit a modified DPP or DOCD or resubmit a disapproved DPP or DOCD? |
|
|
| 250.280 | How must I conduct activities under the approved EP, DPP, or DOCD? |
|
|
| 250.281 | What must I do to conduct activities under the approved EP, DPP, or DOCD? |
|
|
| 250.282 | Do I have to conduct post-approval monitoring? |
|
|
| 250.283 | When must I revise or supplement the approved EP, DPP, or DOCD? |
|
|
| 250.284 | How will MMS require revisions to the approved EP, DPP, or DOCD? |
|
|
| 250.285 | How do I submit revised and supplemental EPs, DPPs, and DOCDs? |
|
|
| 250.286 | What is a DWOP? |
|
|
| 250.287 | For what development projects must I submit a DWOP? |
|
|
| 250.288 | When and how must I submit the Conceptual Plan? |
|
|
| 250.289 | What must the Conceptual Plan contain? |
|
|
| 250.290 | What operations require approval of the Conceptual Plan? |
|
|
| 250.291 | When and how must I submit the DWOP? |
|
|
| 250.292 | What must the DWOP contain? |
|
|
| 250.293 | What operations require approval of the DWOP? |
|
|
| 250.294 | May I combine the Conceptual Plan and the DWOP? |
|
|
| 250.295 | When must I revise my DWOP? |
|
|
| 250.296 | When and how must I submit a CID or a revision to a CID? |
|
|
| 250.297 | What information must a CID contain? |
|
|
| 250.298 | How long will MMS take to evaluate and make a decision on the CID? |
|
|
| 250.299 | What operations require approval of the CID? |
|
|
| 250.300 | Pollution prevention. |
|
|
| 250.301 | Inspection of facilities. |
|
|
| 250.302 | Definitions concerning air quality. |
|
|
| 250.303 | Facilities described in a new or revised Exploration Plan or Development and Production Plan. |
|
|
| 250.304 | Existing facilities. |
|
|
| 250.400 | Who is subject to the requirements of this subpart? |
|
|
| 250.401 | What must I do to keep wells under control? |
|
|
| 250.402 | When and how must I secure a well? |
|
|
| 250.403 | What drilling unit movements must I report? |
|
|
| 250.404 | What are the requirements for the crown block? |
|
|
| 250.405 | What are the safety requirements for diesel engines used on a drilling rig? |
|
|
| 250.406 | What additional safety measures must I take when I conduct drilling operations on a platform that has producing wells or has other hydrocarbon flow? |
|
|
| 250.407 | What tests must I conduct to determine reservoir characteristics? |
|
|
| 250.408 | May I use alternative procedures or equipment during drilling operations? |
|
|
| 250.409 | May I obtain departures from these drilling requirements? |
|
|
| 250.410 | How do I obtain approval to drill a well? |
|
|
| 250.411 | What information must I submit with my application? |
|
|
| 250.412 | What requirements must the location plat meet? |
|
|
| 250.413 | What must my description of well drilling design criteria address? |
|
|
| 250.414 | What must my drilling prognosis include? |
|
|
| 250.415 | What must my casing and cementing programs include? |
|
|
| 250.416 | What must I include in the diverter and BOP descriptions? |
|
|
| 250.417 | What must I provide if I plan to use a mobile offshore drilling unit (MODU)? |
|
|
| 250.418 | What additional information must I submit with my APD? |
|
|
| 250.420 | What well casing and cementing requirements must I meet? |
|
|
| 250.421 | What are the casing and cementing requirements by type of casing string? |
|
|
| 250.422 | When may I resume drilling after cementing? |
|
|
| 250.423 | What are the requirements for pressure testing casing? |
|
|
| 250.424 | What are the requirements for prolonged drilling operations? |
|
|
| 250.425 | What are the requirements for pressure testing liners? |
|
|
| 250.426 | What are the recordkeeping requirements for casing and liner pressure tests? |
|
|
| 250.427 | What are the requirements for pressure integrity tests? |
|
|
| 250.428 | What must I do in certain cementing and casing situations? |
|
|
| 250.430 | When must I install a diverter system? |
|
|
| 250.431 | What are the diverter design and installation requirements? |
|
|
| 250.432 | How do I obtain a departure to diverter design and installation requirements? |
|
|
| 250.433 | What are the diverter actuation and testing requirements? |
|
|
| 250.434 | What are the recordkeeping requirements for diverter actuations and tests? |
|
|
| 250.440 | What are the general requirements for BOP systems and system components? |
|
|
| 250.441 | What are the requirements for a surface BOP stack? |
|
|
| 250.442 | What are the requirements for a subsea BOP stack? |
|
|
| 250.443 | What associated systems and related equipment must all BOP systems include? |
|
|
| 250.444 | What are the choke manifold requirements? |
|
|
| 250.445 | What are the requirements for kelly valves, inside BOPs, and drill-string safety valves? |
|
|
| 250.446 | What are the BOP maintenance and inspection requirements? |
|
|
| 250.447 | When must I pressure test the BOP system? |
|
|
| 250.448 | What are the BOP pressure tests requirements? |
|
|
| 250.449 | What additional BOP testing requirements must I meet? |
|
|
| 250.450 | What are the recordkeeping requirements for BOP tests? |
|
|
| 250.451 | What must I do in certain situations involving BOP equipment or systems? |
|
|
| 250.455 | What are the general requirements for a drilling fluid program? |
|
|
| 250.456 | What safe practices must the drilling fluid program follow? |
|
|
| 250.457 | What equipment is required to monitor drilling fluids? |
|
|
| 250.458 | What quantities of drilling fluids are required? |
|
|
| 250.459 | What are the safety requirements for drilling fluid-handling areas? |
|
|
| 250.460 | What are the requirements for conducting a well test? |
|
|
| 250.461 | What are the requirements for directional and inclination surveys? |
|
|
| 250.462 | What are the requirements for well-control drills? |
|
|
| 250.463 | Who establishes field drilling rules? |
|
|
| 250.465 | When must I submit an Application for Permit to Modify (APM) or an End of Operations Report to MMS? |
|
|
| 250.466 | What records must I keep? |
|
|
| 250.467 | How long must I keep records? |
|
|
| 250.468 | What well records am I required to submit? |
|
|
| 250.469 | What other well records could I be required to submit? |
|
|
| 250.490 | Hydrogen sulfide. |
|
|
| 250.490 | Hydrogen sulfide |
|
|
| 250.500 | General requirements. |
|
|
| 250.501 | Definition. |
|
|
| 250.502 | Equipment movement. |
|
|
| 250.503 | Emergency shutdown system. |
|
|
| 250.504 | Hydrogen sulfide. |
|
|
| 250.505 | Subsea completions. |
|
|
| 250.506 | Crew instructions. |
|
|
| 250.509 | Well-completion structures on fixed platforms. |
|
|
| 250.510 | Diesel engine air intakes. |
|
|
| 250.511 | Traveling-block safety device. |
|
|
| 250.512 | Field well-completion rules. |
|
|
| 250.513 | Approval and reporting of well-completion operations. |
|
|
| 250.514 | Well-control fluids, equipment, and operations. |
|
|
| 250.515 | Blowout prevention equipment. |
|
|
| 250.516 | Blowout preventer system tests, inspections, and maintenance. |
|
|
| 250.517 | Tubing and wellhead equipment. |
|
|
| 250.600 | General requirements. |
|
|
| 250.601 | Definitions. |
|
|
| 250.602 | Equipment movement. |
|
|
| 250.603 | Emergency shutdown system. |
|
|
| 250.604 | Hydrogen sulfide. |
|
|
| 250.605 | Subsea workovers. |
|
|
| 250.606 | Crew instructions. |
|
|
| 250.609 | Well-workover structures on fixed platforms. |
|
|
| 250.610 | Diesel engine air intakes. |
|
|
| 250.611 | Traveling-block safety device. |
|
|
| 250.612 | Field well-workover rules. |
|
|
| 250.613 | Approval and reporting for well-workover operations. |
|
|
| 250.614 | Well-control fluids, equipment, and operations. |
|
|
| 250.615 | Blowout prevention equipment. |
|
|
| 250.616 | Blowout preventer system testing, records, and drills. |
|
|
| 250.617 | Tubing and wellhead equipment. |
|
|
| 250.618 | Wireline operations. |
|
|
| 250.800 | General requirements. |
|
|
| 250.801 | Subsurface safety devices. |
|
|
| 250.802 | Design, installation, and operation of surface production-safety systems. |
|
|
| 250.803 | Additional production system requirements. |
|
|
| 250.804 | Production safety-system testing and records. |
|
|
| 250.805 | Safety device training. |
|
|
| 250.806 | Safety and pollution prevention equipment quality assurance requirements. |
|
|
| 250.807 | Hydrogen sulfide. |
|
|
| 250.900 | What general requirements apply to all platforms? |
|
|
| 250.901 | What industry standards must your platform meet? |
|
|
| 250.902 | What are the requirements for platform removal and location clearance? |
|
|
| 250.903 | What records must I keep? |
|
|
| 250.904 | What is the Platform Approval Program? |
|
|
| 250.905 | How do I get approval for the installation, modification, or repair of my platform? |
|
|
| 250.906 | What must I do to obtain approval for the proposed site of my platform? |
|
|
| 250.907 | Where must I locate foundation boreholes? |
|
|
| 250.908 | What are the minimum structural fatigue design requirements? |
|
|
| 250.909 | What is the Platform Verification Program? |
|
|
| 250.910 | Which of my facilities are subject to the Platform Verification Program? |
|
|
| 250.911 | If my platform is subject to the Platform Verification Program, what must I do? |
|
|
| 250.912 | What plans must I submit under the Platform Verification Program? |
|
|
| 250.913 | When must I resubmit Platform Verification Program plans? |
|
|
| 250.914 | How do I nominate a CVA? |
|
|
| 250.915 | What are the CVA's primary responsibilities? |
|
|
| 250.916 | What are the CVA's primary duties during the design phase? |
|
|
| 250.917 | What are the CVA's primary duties during the fabrication phase? |
|
|
| 250.918 | What are the CVA's primary duties during the installation phase? |
|
|
| 250.919 | What in-service inspection requirements must I meet? |
|
|
| 250.920 | What are the MMS requirements for assessment of platforms? |
|
|
| 250.921 | How do I analyze my platform for cumulative fatigue? |
|
|
| 250.1000 | General requirements. |
|
|
| 250.1001 | Definitions. |
|
|
| 250.1002 | Design requirements for DOI pipelines. |
|
|
| 250.1003 | Installation, testing, and repair requirements for DOI pipelines. |
|
|
| 250.1004 | Safety equipment requirements for DOI pipelines. |
|
|
| 250.1005 | Inspection requirements for DOI pipelines. |
|
|
| 250.1006 | How must I decommission and take out of service a DOI pipeline? |
|
|
| 250.1007 | What to include in applications. |
|
|
| 250.1008 | Reports. |
|
|
| 250.1009 | Requirements to obtain pipeline right-of-way grants. |
|
|
| 250.1010 | General requirements for pipeline right-of-way holders. |
|
|
| 250.1011 | Bond requirements for pipeline right-of-way holders. |
|
|
| 250.1012 | Required payments for pipeline right-of-way holders. |
|
|
| 250.1013 | Grounds for forfeiture of pipeline right-of-way grants. |
|
|
| 250.1014 | When pipeline right-of-way grants expire. |
|
|
| 250.1015 | Applications for pipeline right-of-way grants. |
|
|
| 250.1016 | Granting pipeline rights-of-way. |
|
|
| 250.1017 | Requirements for construction under pipeline right-of-way grants. |
|
|
| 250.1018 | Assignment of pipeline right-of-way grants. |
|
|
| 250.1019 | Relinquishment of pipeline right-of-way grants. |
|
|
| 250.1100 | Definitions for production rates. |
|
|
| 250.1101 | General requirements and classification of reservoirs. |
|
|
| 250.1102 | Oil and gas production rates. |
|
|
| 250.1103 | Well production testing. |
|
|
| 250.1104 | Bottomhole pressure survey. |
|
|
| 250.1105 | Flaring or venting gas and burning liquid hydrocarbons. |
|
|
| 250.1106 | Downhole commingling. |
|
|
| 250.1107 | Enhanced oil and gas recovery operations. |
|
|
| 250.1200 | Question index table. |
|
|
| 250.1201 | Definitions. |
|
|
| 250.1202 | Liquid hydrocarbon measurement. |
|
|
| 250.1203 | Gas measurement. |
|
|
| 250.1204 | Surface commingling. |
|
|
| 250.1205 | Site security. |
|
|
| 250.1300 | What is the purpose of this subpart? |
|
|
| 250.1301 | What are the requirements for unitization? |
|
|
| 250.1302 | What if I have a competitive reservoir on a lease? |
|
|
| 250.1303 | How do I apply for voluntary unitization? |
|
|
| 250.1304 | How will MMS require unitization? |
|
|
| 250.1400 | How does MMS begin the civil penalty process? |
|
|
| 250.1401 | Index table. |
|
|
| 250.1402 | Definitions. |
|
|
| 250.1403 | What is the maximum civil penalty? |
|
|
| 250.1404 | Which violations will MMS review for potential civil penalties? |
|
|
| 250.1405 | When is a case file developed? |
|
|
| 250.1406 | When will MMS notify me and provide penalty information? |
|
|
| 250.1407 | How do I respond to the letter of notification? |
|
|
| 250.1408 | When will I be notified of the Reviewing Officer's decision? |
|
|
| 250.1409 | What are my appeal rights? |
|
|
| 250.1500 | Definitions. |
|
|
| 250.1501 | What is the goal of my training program? |
|
|
| 250.1502 | Is there a transition period for complying with the regulations in this subpart? |
|
|
| 250.1503 | What are my general responsibilities for training? |
|
|
| 250.1504 | May I use alternative training methods? |
|
|
| 250.1505 | Where may I get training for my employees? |
|
|
| 250.1506 | How often must I train my employees? |
|
|
| 250.1507 | How will MMS measure training results? |
|
|
| 250.1508 | What must I do when MMS administers written or oral tests? |
|
|
| 250.1509 | What must I do when MMS administers or requires hands-on, simulator, or other types of testing? |
|
|
| 250.1510 | What will MMS do if my training program does not comply with this subpart? |
|
|
| 250.1600 | Performance standard. |
|
|
| 250.1601 | Definitions. |
|
|
| 250.1602 | Applicability. |
|
|
| 250.1603 | Determination of sulphur deposit. |
|
|
| 250.1604 | General requirements. |
|
|
| 250.1605 | Drilling requirements. |
|
|
| 250.1606 | Control of wells. |
|
|
| 250.1607 | Field rules. |
|
|
| 250.1608 | Well casing and cementing. |
|
|
| 250.1609 | Pressure testing of casing. |
|
|
| 250.1610 | Blowout preventer systems and system components. |
|
|
| 250.1611 | Blowout preventer systems tests, actuations, inspections, and maintenance. |
|
|
| 250.1612 | Well-control drills. |
|
|
| 250.1613 | Diverter systems. |
|
|
| 250.1614 | Mud program. |
|
|
| 250.1615 | Securing of wells. |
|
|
| 250.1616 | Supervision, surveillance, and training. |
|
|
| 250.1617 | Application for permit to drill. |
|
|
| 250.1618 | Sundry notices and reports on wells. |
|
|
| 250.1619 | Well records. |
|
|
| 250.1620 | Well-completion and well-workover requirements. |
|
|
| 250.1621 | Crew instructions. |
|
|
| 250.1622 | Approvals and reporting of well-completion and well-workover operations. |
|
|
| 250.1623 | Well-control fluids, equipment, and operations. |
|
|
| 250.1624 | Blowout prevention equipment. |
|
|
| 250.1625 | Blowout preventer system testing, records, and drills. |
|
|
| 250.1626 | Tubing and wellhead equipment. |
|
|
| 250.1627 | Production requirements. |
|
|
| 250.1628 | Design, installation, and operation of production systems. |
|
|
| 250.1629 | Additional production and fuel gas system requirements. |
|
|
| 250.1630 | Safety-system testing and records. |
|
|
| 250.1631 | Safety device training. |
|
|
| 250.1632 | Production rates. |
|
|
| 250.1633 | Production measurement. |
|
|
| 250.1634 | Site security. |
|
|
| 250.1700 | What do the terms ``decommissioning'', ``obstructions'', and ``facility'' mean? |
|
|
| 250.1701 | Who must meet the decommissioning obligations in this subpart? |
|
|
| 250.1702 | When do I accrue decommissioning obligations? |
|
|
| 250.1703 | What are the general requirements for decommissioning? |
|
|
| 250.1704 | When must I submit decommissioning applications and reports? |
|
|
| 250.1710 | When must I permanently plug all wells on a lease? |
|
|
| 250.1711 | When will MMS order me to permanently plug a well? |
|
|
| 250.1712 | What information must I submit before I permanently plug a well or zone? |
|
|
| 250.1713 | Must I notify MMS before I begin well plugging operations? |
|
|
| 250.1714 | What must I accomplish with well plugs? |
|
|
| 250.1715 | How must I permanently plug a well? |
|
|
| 250.1716 | To what depth must I remove wellheads and casings? |
|
|
| 250.1717 | After I permanently plug a well, what information must I submit? |
|
|
| 250.1721 | If I temporarily abandon a well that I plan to re-enter, what must I do? |
|
|
| 250.1722 | If I install a subsea protective device, what requirements must I meet? |
|
|
| 250.1723 | What must I do when it is no longer necessary to maintain a well in temporary abandoned status? |
|
|
| 250.1725 | When do I have to remove platforms and other facilities? |
|
|
| 250.1726 | When must I submit an initial platform removal application and what must it include? |
|
|
| 250.1727 | What information must I include in my final application to remove a platform or other facility? |
|
|
| 250.1728 | To what depth must I remove a platform or other facility? |
|
|
| 250.1729 | After I remove a platform or other facility, what information must I submit? |
|
|
| 250.1730 | When might MMS approve partial structure removal or toppling in place? |
|
|
| 250.1740 | How must I verify that the site of a permanently plugged well, removed platform, or other removed facility is clear of obstructions? |
|
|
| 250.1741 | If I drag a trawl across a site, what requirements must I meet? |
|
|
| 250.1742 | What other methods can I use to verify that a site is clear? |
|
|
| 250.1743 | How do I certify that a site is clear of obstructions? |
|
|
| 250.1750 | When may I decommission a pipeline in place? |
|
|
| 250.1751 | How do I decommission a pipeline in place? |
|
|
| 250.1752 | How do I remove a pipeline? |
|
|
| 250.1753 | After I decommission a pipeline, what information must I submit? |
|
|
| 250.1754 | When must I remove a pipeline decommissioned in place? |
![[BACK ]](https://webarchive.library.unt.edu/eot2008/20081018132818im_/http://www.access.gpo.gov/su_docs/images/icons/lefticn2.gif){kind=icon}
![[BACK ]](https://webarchive.library.unt.edu/eot2008/20081018132818im_/http://www.access.gpo.gov/su_docs/images/icons/content.gif){kind=icon}