2005 CFR Title 46, Volume 2

Title 46--Shipping CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PART 54--PRESSURE VESSELS
	54.01-1	Incorporation by reference.
	54.01-2	Adoption of division 1 of section VIII of the ASME Code.
	54.01-5	Scope (modifies U-1 and U-2).
	54.01-10	Steam generating pressure vessels (modifies U-1(e)).
	54.01-15	Exemptions from shop inspection and plan approval (replaces U-1(c) (6) through (9)).
	54.01-17	Pressure vessel for human occupancy (PVHO).
	54.01-18	Plan approval.
	54.01-25	Miscellaneous pressure components (modifies UG-11).
	54.01-30	Loadings (modifies UG-22).
	54.01-35	Corrosion (modifies UG- 25).
	54.01-40	External pressure (modifies UG-28).
	54.03-1	Scope.
	54.03-5	General.
	54.05-1	Scope (replaces UG-84).
	54.05-3	Tests required.
	54.05-5	Toughness test specimens.
	54.05-6	Toughness test temperatures.
	54.05-10	Certification of material toughness tests.
	54.05-15	Weldment toughness tests--procedure qualifications.
	54.05-16	Production toughness testing.
	54.05-17	Weld toughness test acceptance criteria.
	54.05-20	Impact test properties for service of 0 °F and below.
	54.05-30	Allowable stress values at low temperatures.
	54.10-1	Scope (modifies UG-90 through UG-103 and UG-115 through UG-120).
	54.10-3	Marine inspectors (replaces UG-90 and UG-91, and modifies UG-92 through UG-103).
	54.10-5	Maximum allowable working pressure (reproduces UG-98).
	54.10-10	Standard hydrostatic test (modifies UG-99).
	54.10-15	Pneumatic test (modifies UG-100).
	54.10-20	Marking and stamping.
	54.10-25	Manufacturers' data report forms (modifies UG-120).
	54.15-1	General (modifies UG-125 through UG-136).
	54.15-3	Definitions (modifies UA-60).
	54.15-5	Protective devices (modifies UG-125).
	54.15-10	Safety and relief valves (modifies UG-126).
	54.15-13	Rupture disks (modifies UG-127).
	54.15-15	Relief devices for unfired steam boilers, evaporators, and heat exchangers (modifies UG-126).
	54.15-25	Minimum relief capacities for cargo tanks containing compressed or liquefied gas.
	54.20-1	Scope (modifies UW-1 through UW-65).
	54.20-2	Fabrication for hazardous materials (replaces UW-2(a)).
	54.20-3	Design (modifies UW-9, UW-11(a), UW-13, and UW-16).
	54.20-5	Welding qualification tests and production testing (modifies UW-26, UW-28, UW-29, UW-47, and UW-48).
	54.23-1	Scope (modifies UB-1).
	54.25-1	Scope.
	54.25-3	Steel plates (modifies UCS-6).
	54.25-5	Corrosion allowance (replaces UCS-25).
	54.25-7	Requirement for postweld heat treatment (modifies UCS-56).
	54.25-8	Radiography (modifies UW-11(a), UCS-57, UNF-57, UHA-33, and UHT-57).
	54.25-10	Low temperature operation--ferritic steels (replaces UCS-65 through UCS-67).
	54.25-15	Low temperature operation--high alloy steels (modifies UHA-23(b) and UHA-51).
	54.25-20	Low temperature operation--ferritic steels with properties enhanced by heat treatment (modifies UHT-5(c), UHT-6, UHT-23, and UHT-82).
	54.25-25	Welding of quenched and tempered steels (modifies UHT-82).
	54.30-1	Scope.
	54.30-3	Introduction.
	54.30-5	Limitations and requirements.
	54.30-10	Method of performing mechanical stress relief.
	54.30-15	Requirement for analysis and computation.