American Society for Testing and Materials (ASTM)
ASTM Standards are available from:
American Society for Testing and Materials (a nongovernment website)
100 Barr Harbor Drive
West Conshohocken, PA 19428-2959
Telephone: (610) 832-9585
FAX: (610) 832-9555
ASTM Standards
Number |
Title |
ASTM C-423 |
Sound Absorption and Sound Absorption Coefficients. |
ASTM D-297 |
Standard Test Methods for Rubber Products - Chemical Analysis |
ASTM D-418 |
Standard Methods of Testing Pile Yarn Floor Covering Construction |
ASTM D-629 |
Standard Test Methods for Quantitative Analysis of Textiles |
ASTM D-861 |
Standard Practice for Use of the Tex System to Designate Linear Density of Fibers, Yarn Intermediates, and Yarns |
ASTM D-1335 |
Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings |
ASTM D-1423 |
Standard Test Method for Twist in Yarns by Direct Counting |
ASTM D-1667 |
Standard Specification for Flexible Cellular Materials - Vinyl Chloride Polymers and Copolymers (Closed Cell Foam) |
ASTM D-2646 |
Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings |
ASTM D-3278 |
Standard Test Methods for Flash Point of Liquids by Small Scale Closed Cup Apparatus |
ASTM D-3574 |
Standard Test Methods for Flexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams |
ASTM D-3676 |
Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay |
ASTM D-3936 |
Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering |
ASTM D-5848 |
Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings |
ASTM E-84 |
Test Method for Surface Burning Characteristics of Building Materials. |
ASTM E-90 |
Standard Method for Laboratory Measurement of Airborne Sound Loss of Building Partitions. |
ASTM E-413 |
Standard Classification for Determination of Sound Transmission Class |
ASTM E-648 |
Standard Test Method for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source |
ASTM E-662 |
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
ASTM F-1427 |
Standard Consumer Safety Specification for Bunk Beds |
Last Reviewed 7/18/2008