Skip to contentUnited States Department of Transportation - Federal Highway AdministrationSearch FHWAFeedback

Construction

Request

Action: Notice, request for comments.

Web posting date:: 06/05/2008

Federal Register Notice of Finding Publication Date: 07/23/08

Effective Date of Federal Register: 07/24/08

Close of public comment period: 08/08/08

Summary: The Federal Highway Administration (FHWA) is seeking comments on whether a waiver of the Buy America requirements of 23 CFR 635.410 should be granted to permit the use of non-domestic U-69 guard bars, 182 units; Manganese Castings, 118 units; Turnouts braces, 9,629 units; Weld kits, 2,262 units in the state of Illinois.

FHWA will only consider a Buy America waiver when the conditions of 23 CFR 635.410( c) have been met: (1) when the application of the provision would be inconsistent with the public interest; or (2) when steel and iron products are not produced in the United States in sufficient and reasonably available quantities, which are of a satisfactory quality.

The FHWA will consider all comments received in the initial 15-day comment period during our evaluation of the waiver request. Comments received after this period, but before notice of our finding is published in the Federal Register, will be considered to the extent practical. Follow-up coordination on the comments received may result in a delay in the publication of our waiver finding in the Federal Register. Comments received during the 15-day comment period after notice of our finding is published in the Federal Register will be reviewed, but the finding will continue to remain valid. Comments received during the comment period after the effective date of the finding will be reviewed, and may influence the FHWA's decision to terminate or modify a finding.

Comments

Albert Gawel 07/23/2008
We think that designer could look for other alternatives to make it. Or they should aks others for a different design in the U.S.A!!! -Albert Gawel
robert burhoe 07/23/2008
If the design engineer has other options which can be produced in the US he should make use of them. he should resist using a design that he knows precludes domestic manufacturers Cosmec,inc located in walpole ma 02081 fabricates Center Pivot Bearing Assemblies.They can be contacted at 508 668 6600

Events

Contact

Edwin Okonkwo
Office of Program Administration
202-366-1558
E-mail Edwin

 
 
This page last modified on 07/24/08
 

FHWA
United States Department of Transportation - Federal Highway Administration