[Federal Register: June 19, 2008 (Volume 73, Number 119)]
[Proposed Rules]
[Page 35057-35058]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr19jn08-30]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Mine Safety and Health Administration
30 CFR Part 18
RIN 1219-AB60
Conveyor Belt Combustion Toxicity and Smoke Density
AGENCY: Mine Safety and Health Administration (MSHA), Labor.
ACTION: Request for information.
-----------------------------------------------------------------------
SUMMARY: MSHA is requesting information from the public on smoke
density and combustion toxicity tests that may be used to evaluate the
fire hazard of conveyor belting and similar materials used in
underground coal mines.
DATES: All comments must be received by midnight eastern standard time
on August 18, 2008.
ADDRESSES:
Comments: Comments must be clearly identified with ``RIN 1219-
AB60'' and may be sent to MSHA by any of the following methods:
(1) Federal Rulemaking Portal: http://www.regulations.gov. Follow
the instructions for submitting comments.
(2) Electronic mail: zzMSHA-Comments@dol.gov. Include ``RIN 1219-
AB60'' in the subject line of the message.
(3) Facsimile: (202) 693-9441. Include ``RIN 1219-AB60'' in the
subject.
(4) Regular Mail: MSHA, Office of Standards, Regulations, and
Variances, 1100 Wilson Blvd., Room 2350, Arlington, Virginia 22209-
3939.
(5) Hand Delivery or Courier: MSHA, Office of Standards,
Regulations, and Variances, 1100 Wilson Blvd., Room 2350, Arlington,
Virginia 22209-3939. Sign in at the receptionist's desk on the 21st
floor.
Comments can be accessed electronically at http://www.msha.gov
under the ``Rules and Regs'' link. MSHA will post all comments on the
Internet without change, including any personal information provided.
Comments may also be reviewed at the Office of Standards, Regulations,
and Variances, 1100 Wilson Blvd., Room 2350, Arlington, Virginia. Sign
in at the receptionist's desk on the 21st floor.
MSHA maintains a listserve that enables subscribers to receive e-
mail notification when rulemaking documents are published in the
Federal Register. To subscribe to the listserve, go to http://
www.msha.gov/subscriptions/subscribe.aspx.
FOR FURTHER INFORMATION CONTACT: Patricia W. Silvey, Director, Office
of Standards, Regulations, and Variances, MSHA, 1100 Wilson Blvd, Room
2350, Arlington, Virginia 22209-3939, silvey.patricia@dol.gov (e-mail),
(202) 693-9440 (voice), or (202) 693-9441 (Fax).
SUPPLEMENTARY INFORMATION:
I. Introduction
Under section 11 of the Mine Improvement and New Emergency Response
(MINER) Act of 2006, the Secretary of Labor established the Technical
Study Panel on the Utilization of Belt Air and the Composition and Fire
Retardant Properties of Belt Materials in Underground Coal Mining
(Panel) to conduct an independent scientific engineering review and to
make recommendations with respect to the utilization of belt air and
flame retardant properties of belt materials for use in underground
coal mines. The Panel issued its final report on December 20, 2007. In
a separate rulemaking published in today's Federal Register, MSHA is
proposing to revise its approval test in existing regulations on flame-
resistant conveyor belts for use in underground coal mines in
accordance with section 101 of the Mine Act.
During the Technical Study Panel meeting in March, 2007, the Panel
received information on hazards associated from the combustion products
of burning conveyor belt. This information is related to combustion
toxicity and smoke density generated from burning conveyor belt
material. Those presenting the information to the Panel did not provide
data on specific hazards or specific tests used to measure combustion
toxicity and smoke density. Consequently, MSHA is requesting
information on the tests, hazard evaluation studies and the application
of data and methods for assessing the smoke density and toxic potency
of smoke and other products produced from the combustion of conveyor
belts and similar materials.
II. Information Request
MSHA is specifically soliciting information on:
1. Tests and related technical information including:
--The test method;
--The material or materials that the test is designed for;
--The advantages and disadvantages of the test;
--Research reports, technical studies and hazard assessment methods,
incident reports involving the health and safety effects of smoke and
combustion products on persons, conclusions, and technical opinions;
and
--Costs of materials, labor, and the apparatus or equipment for
conducting the tests.
2. Test methods used by international governmental agencies and
other organizations (i.e., Australia, the European Economic Union) for
smoke density or toxicity potency of smoke and other products produced
from the of combustion of conveyor belting or similar materials. Please
include:
--The health and safety benefits associated with compliance with the
test methods and other requirements;
--The associated costs of compliance.
3. Requirements, standards and test methods for fire safety
relating to smoke density and toxicity for materials such as electric
cables where the test or information could be used to evaluate smoke
density or the toxic potency of smoke and other products produced from
combustion of conveyor belting or similar materials. MSHA is
particularly interested in standards by private standard setting
organizations such as the International Standards Organization and the
National Fire Protection Association; and the States of California and
New York. Please exclude information on materials that would not be
relevant to underground coal mining, such as fabrics, wall board and
surface coverings. Please report
[[Page 35058]]
compliance experience with the requirements, test methods or standards.
4. Scientific studies, data, and test methods on new technologies
and materials with respect to halogenated materials and halogen-free
materials that pertain to reducing the smoke producing properties and
combustion toxicity of such materials.
5. New technologies and materials that result in reduced smoke and
toxic products of combustion that would be relevant to conveyor belts
and related materials for use in underground coal mines.
6. If such materials are commercially available and could be used
in underground coal mines, what is the difference in cost and
performance between conventional materials and these new materials?
Dated: June 11, 2008.
Richard E. Stickler,
Acting Assistant Secretary for Mine Safety and Health.
[FR Doc. E8-13633 Filed 6-18-08; 8:45 am]
BILLING CODE 4510-43-P