U.S. Geological Survey Toxic Substances Hydrology Program--Proceedings
of the Technical Meeting, Colorado Springs, Colorado, September 20-24, 1993,
Water-Resources Investigations Report 94-4015
![Previous Page](https://webarchive.library.unt.edu/eot2008/20081106210406im_/http://toxics.usgs.gov/icons/dmprev.gif)
A Review of Methods for Assessing the Potential for Regional
Ground-Water Contamination
by
David R. Soller (U.S. Geological Survey, Reston, Va.)
Abstract
The potential for ground-water contamination, or the sensitivity of an
area to ground-water contamination, can be estimated by a quantitative,
deterministic model that predicts fate and transport of water and contaminants
locally, or by a broad, regional qualitative model. Although regional models
do not predict ground-water contamination at specific sites as accurately
as do the local models, the former are useful tools for regional planning
and research. All regional models depict relative contamination potential.
Some models focus on contamination potential of ground water in aquifers,
either at the land surface or confined beneath low-permeability sediments,
whereas other models focus on ground water at the unconfined water table.
For a given area, the focus of ground-water protection efforts will determine
which models are most appropriate. Some regional models use dimensionless
numbers and weighting factors to derive a relative measure of contamination
potential, whereas others assemble source data into a composite map and
rank the resulting map units for contamination potential according to a
set of rules. Both approaches have certain advantages. However, because
most contamination potential maps in the area considered (Central United
States) show roughly similar patterns of contamination potential, some models
may be more practical than others. For example, if simple models give results
similar to models requiring cumbersome numeric manipulation of data, there
is little justification for the effort needed to execute the more complex
model. Availability of information required by a model also should determine
its utility. Regional, stochastic models that provide actual, not relative,
predictions of contamination potential are needed. Those models should consider
the uncertainty in source information in order to estimate contamination
potential with specified levels of uncertainty.
![Previous Page](https://webarchive.library.unt.edu/eot2008/20081106210406im_/http://toxics.usgs.gov/icons/dmprev.gif)
|
|