REPORT NUMBER
|
TITLE
|
DOT/FRA/ORD-07/29
|
Development and Application of Methodology for Reliability Assessment of Tank Car Structures: Phase I |
DOT/FRA/ORD-07/25
|
Stub Sill Railroad Tank Car Research Project: Full-Scale Damage Tolerance Test |
DOT/FRA/ORD-07/23
|
In-Service, Over-the-Road Testing of One Car for Tank Car Operating Environment Study (Phase IIA) Test Results |
DOT/FRA/ORD-07/22
|
Tank Car Operating Environment Study -- Phase I |
DOT/FRA/ORD-07/16
|
Conceptual Development of Impact Overload Detection Devices for Tank Car Service |
DOT/FRA/ORD-07/05
|
Tank Car Reliability Design and Analysis |
DOT/FRA/ORD-06/16
|
Impact Performance of Draft Gears in 263,000 Pound Gross Rail Load and 286,000 Pound Gross Rail Load Tank Car Service |
DOT/FRA/ORD-06/12
|
Damage Assessment of Railroad Tank Cars Involved in Accidents:
Phase I - Literature Search and Evaluation. |
DOT/FRA/ORD-06/11
|
Survivability of Railroad Tank Car Top Fittings in Rollover Scenario Derailments |
DOT/FRA/ORD-06/04-III
|
Variable Amplitude Fatigue Crack Growth Characteristics of Railroad Tank Car Steel Volume III |
DOT/FRA/ORD-06/04-II
|
Fatigue Crack Growth Behavior of Railroad Tank Car Steel TC-128B Subjected to Various Environments Volume II - Appendices |
DOT/FRA/ORD-06/04-I
|
Fatigue Crack Growth Behavior of Railroad Tank Car Steel TC-128B Subjected to Various Environments Volume I |
DOT/FRA/ORD-05/03
|
Comparative Safety of the Transport of High-Level Radioactive Materials on Dedicated, Key and Regular Trains - Technical Study |
DOT/FRA/ORD-03/21
|
Railroad Tank Car Relief Valve Requirements for Liquid PIH Lading |
DOT/FRA/ORD-02/04
|
Damage Assessment of Railroad Tank Cars Involved in Accidents:
Phase II - Modeling and Validation |
DOT/FRA/ORD-01/21.i
|
Evaluation of Semi-Empirical Analyses for Railroad Tank Car Puncture Velocity, Part I: Correlations with Experimental Data |
DOT/FRA/ORD-01/21.ii
|
Evaluation of Semi-Empirical Analyses for Railroad Tank Car Puncture Velocity, Part II: Correlations with Engineering Analyses |
DOT/FRA/ORD-01/15
|
Steel Alloys with Lower Bainite Microstructures for Use in Railroad Cars and Track |
DOT/FRA/ORD-01/14
|
Effects Of Coupler Height Mismatch On The Structural Integrity Of Railroad Tank Car Stub Sills |
DOT/FRA/ORD-01/04
|
Railroad Tank Car Nondestructive Methods Evaluation |
DOT/FRA/ORD-99/05
|
Non-Accident Release of Hazmat from Railroad Tank Cars:
Training Issues
|
DOT/FRA/ORD-98/05
|
Improved Source Location Using Sensor Arrays |
DOT/FRA/ORD-98/09A
|
Tank Car Thermal Analysis, Volume I, User's Manual for Analysis Program |
DOT/FRA/ORD-98/09B
|
Tank Car Thermal Analysis, Volume II: Technical Documentation Report for Analysis Program |
DOT/FRA/ORD-97/xx
|
Phase I Literature Search and Evaluation for Damage |
DOT/FRA/ORD-95/11
|
Stub Sill Tank Car Research Project Results of a 15,000-mile over-the-road Test |
DOT/FRA/ORD-95/03
|
Hazardous Materials Transportation in Tank Cars
Analysis of Risks - Part II |
DOT/FRA/ORD-94/23
|
Thermal Boundary Conditions from Engulfing Fires |
DOT/FRA/ORD-93/11
|
FRA Tank Car Manufacturing/Repair/Retest Facility Evaluation Form |
DOT/FRA/ORD-93/10
|
Tank Car Fatigue Crack Growth Test |
DOT/FRA/ORD-92/34
|
Hazardous Materials Transportation in Tank Cars
Analysis of Risks - Part I |
DOT/FRA/ORD-92/29
|
Aluminum/Cold Temperature Tank Car Puncture Resistance Tests: Data Report |
DOT/FRA/ORD-92/28
|
Controlled Tank Car Impact Tests |
DOT/FRA/ORD-92/27
|
Field Product Removal Methods for Tank Cars |
DOT/FRA/ORD-92/18.1
|
Hazardous Materials Car Placement in A Train Consist
Volume 1 - Review and Analysis |
DOT/FRA/ORD-92/12
|
Aluminum Tank Car Puncture Resistance Evaluation |
DOT/FRA/ORD-92/11
|
Chlorine Tank Car Puncture Resistance Evaluation |
DOT/FRA/ORD-92/05
|
Residual Stress Measurements of Retrofitted Tank Car Weldments |
DOT/FRA/ORD-91/05
|
Tank Car Accident Data Analysis |
DOT/FRA/ORD-91/01
|
Hazardous Material Releases Due To Unsecured Openings and Lining Failures |
DOT/FRA/ORD-90/02
|
Tank Car Frangible Disc Test |
DOT/FRA/ORD-90/01
|
Thermal Response of a Small Scale Cask-Like Test Article to Three Different High Temperature Environments |
None Available
|
A Report on Tank Cars: Federal Oversight of Design, Construction and Repair |
DOT/FRA/ORD-88/3690
|
Dynamic Mechanical Properties of Two AAR M128 and One ASTM A212-B Steel Tank Car Head Plates |
DOT/FRA/ORD-88/14
|
A Risk Assessment Study on Transportation of Hazardous Materials over U.S. Railroads |
DOT/FRA/ORD-88/04
|
Safety Testing of Intermodal Hazmat Configurations: Summary Report |
DOT/FRA/ORD-88/02
|
Evaluation of Damaged Tank Car Structural Integrity |
DOT/FRA/ORD-87/11
|
Evaluation of the Thermal Effectiveness of Urethane Foam and Fiberglass as Insulation for Tank Cars |
DOT/FRA/ORD-87/06
|
Puncture Resistance of Scale Model Aluminum Tank Car Heads |
DOT/FRA/ORD-87/04
|
Fire Tests on Insulation for Aluminum Tank Cars: An evaluation of glass fiber, ceramic fiber, and mineral fiber materials in torch-fire and pool-fire environments. |
DOT/FRA/ORD-85/12
|
Thermal Protection Study of Cryogenic Tank Cars |
DOT/FRA/ORD-85/10
|
Thermal Insulation Systems Study for the Chlorine Tank Car |
DOT/FRA/ORD-85/05
|
An Experimental Investigation of the Discharge of a Flashing Liquid from a Finite Reservoir |
DOT/FRA/ORD-85/04
|
Small Scale Impact Simulation Tests |
DOT/FRA/ORD-84/08.I
|
Temperatures, Pressures, and Liquid Levels of Tank Cars Engulfed in Fires |
DOT/FRA/ORD-83/20
|
Event Probabilities and Impact Zones for Hazardous Materials Accidents on Railroads |
DOT/FRA/ORD-82/27
|
Special Routing of Spent Fuel Shipments |
DOT/FRA/ORD-81/75.2
|
Engineering Data Characterizing the Fleet of US Railway Rolling Stock |
DOT/FRA/ORD-81/75.I
|
Engineering Data Characterizing the Fleet of U.S. Railway Rolling Stock: Volume 1 - User Guide |
DOT/FRA/ORD-81/35
|
The Non-Steady Outflow of Propane Vapor from a Railroad Tank Car |
DOT/FRA/ORD-81/33
|
A Metallurgical Evaluation of Two AAR M-128 Steel Tank Car Head Plates used in Switchyard Impact Tests |
DOT/FRA/ORD-81/32
|
A Metallurgical Analysis of an ASTM A 212-B Steel Tank Car Head Plate |
DOT/FRA/ORD-80/06
|
Results and Analysis of the Switchyard Impact Tests |
DOT/FRA/ORD-78/32.1
|
Selected Topics in Railroad Tank Car Safety Research, Volume 1: Fatigue Evaluation of Prototype Tank Car Head Shield |
DOT/FRA/ORD-78/32.2
|
Selected Topics in Railroad Tank Car Safety Research |
DOT/FRA/ORD-76/300
|
The Calculation of the Thermodynamic Properties of Propane, Propylene, N-Butane, and Ethylene |
DOT/FRA/ORD-76/298
|
Two-Phase Flow Model Test Facility |
DOT/FRA/ORD-76/278
|
Theoretical Manual and User's Guide: Longitudinal-vertical Train Action Model |
DOT/FRA/ORD-76/299
|
Thermodynamic Properties of Liquefied Petroleum Gases |
DOT/FRA/ORD-76/269
|
Tank Car Head Puncture Mechanisms |
DOT/FRA/ORD-76/74
|
Mechanical Properties of AAR M128-69-B Steel Plate Samples Taken From Insulated Fire-tested Tank Car RAX 202 |
DOT/FRA/ORD-75/52
|
A Metallurgical Investigation of a Full-Scale Insulated Rail Tank Car Filled with LPG Subjected to a Fire Environment |
DOT/FRA/ORD-75/51
|
Impact Properties of Steels Taken From Four Failed Tank Cars |
DOT/FRA/ORD-75/48
|
A Metallurgical Analysis of Five Steel Plates Taken from a Tank Car Accident Near Crescent City, Illinois |
DOT/FRA/ORD-75/45
|
Rail Hazardous Material Tank Car Design Study |
DOT/FRA/ORD-75/32
|
Comparison of Thermally Coated and Uninsulated Rail Tank Cars Filled with LPG Subjected to a Fire Environment |
DOT/FRA/ORD-75/31
|
The Effects of a Fire Environment on a Rail Tank Car Filled with LPG |
DOT/FRA/ORD-75/23
|
Computer Simulation of Tank Car Head Puncture Mechanisms |
DOT/FRA-RT-71-74
|
A Study to Reduce the Hazards of Tank Car Transportation |
DOT/FRA/TSC-1807
|
Rerouting and Speed Reduction of Hazardous Material Trains in Selected Conrail Corridors |
NBSIR 88-3690
|
Dynamic Mechanical Properties of Two AAR M128 and One ASTM A212-B Steel Tank Car Head Plates |