[Federal Register: December 16, 2002 (Volume 67, Number 241)]
[Notices]
[Page 77060-77064]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr16de02-44]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2002-0072; FRL-7284-9]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from November 2, 2002 to November 19, 2002, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
DATES: Comments identified by the docket ID number OPPT- 2002-0072 and
the specific PMN number or TME number, must be received on or before
January 15, 2003.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Acting Director,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. How Can I Get Copies of This Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket identification (ID) number OPPT-2002-0072. The
official public docket consists of the documents specifically
referenced in this action, any public comments received, and other
information related to this action. Although a part of the official
docket, the public docket does not include Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute. The official public docket is the collection of materials
that is available for public viewing at the EPA Docket Center, Rm.
B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington,
DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The EPA Docket Center Reading
Room telephone number is (202) 566-1744 and the telephone number for
the OPPT Docket, which is located in EPA Docket Center, is (202) 566-
0280.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Although not all docket materials may be
available electronically, you may still access any of the publicly
available docket materials through the docket facility identified in
Unit I.B.1. Once in the system, select ``search,'' then key in the
appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide a reference to that
material in the version of the comment that is placed in EPA's
electronic public docket. The entire printed comment, including the
[[Page 77061]]
copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be transferred to EPA's electronic public
docket. Public comments that are mailed or delivered to the docket will
be scanned and placed in EPA's electronic public docket. Where
practical, physical objects will be photographed, and the photograph
will be placed in EPA's electronic public docket along with a brief
description written by the docket staff.
C. How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number and specific PMN number or TME number in
the subject line on the first page of your comment. Please ensure that
your comments are submitted within the specified comment period.
Comments received after the close of the comment period will be marked
``late.'' EPA is not required to consider these late comments. If you
wish to submit CBI or information that is otherwise protected by
statute, please follow the instructions in Unit I.D. Do not use EPA
Dockets or e- mail to submit CBI or information protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e- mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket
, and follow the online instructions for submitting comments.
Once in the system, select`` search,'' and then key in docket ID
number-- OPPT-2002-0072. The system is an`` anonymous access'' system,
which means EPA will not know your identity, e-mail address, or other
contact information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov,
Attention: Docket ID Number OPPT-2002-0072 and PMN Number or TME
Number. In contrast to EPA's electronic public docket, EPA's e-mail
system is not an ``anonymous access'' system. If you send an e-mail
comment directly to the docket without going through EPA's electronic
public docket, EPA's e-mail system automatically captures your e-mail
address. E-mail addresses that are automatically captured by EPA's e-
mail system are included as part of the comment that is placed in the
official public docket, and made available in EPA's electronic public
docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Document Control Office (7407M),
Office of Pollution Prevention and Toxics (OPPT), Environmental
Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-
0001.
3. By hand delivery or courier. Deliver your comments to: OPPT
Document Control Office (DCO) in EPA East Building Rm. 6428, 1201
Constitution Ave., NW., Washington, DC. Attention: Docket ID Number
OPPT-2002-0072 and PMN Number or TME Number. The DCO is open from 8
a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930.
D. How Should I Submit CBI To the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the technical person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the notice or collection
activity.
7. Make sure to submit your comments by the deadline in this
document.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action and the specific PMN number you are
commenting on in the subject line on the first page of your response.
You may also provide the name, date, and Federal Register citation.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which
[[Page 77062]]
covers the period from November 2, 2002, to November 19, 2002, consists
of the PMNs pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit II. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 37 Premanufacture Notices Received From: 11/02/02 to 11/19/02
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-03-0044 10/18/02* 01/16/03 Lambent Technologies (S) Dispersant (S) Glycerides, soya
mono- and di-
phosphates
P-03-0045 10/18/02* 01/16/03 Lambent Technologies (S) Lubricant; mold (S) Glycerides, soya
release agent; mono- and di,
emulsifier phosphates, sodium
salts
P-03-0092 11/04/02 02/02/03 CBI (G) Flame/fire (G) Phosphoric acid
retardant-open, non- monoamine salt
dispersive use
P-03-0093 11/04/02 02/02/03 CBI (G) Epoxy polymer for (G) Polyglycidyl
coatings and ether of (p-hydroxy
composites styrene) novolak
P-03-0094 11/04/02 02/02/03 CBI (G) Colorant for (G) Co-poly-2-methyl-
plastics 1,5-pentane
isophthalimide
P-03-0095 11/05/02 02/03/03 CBI (G) Viscosity index (G) Alkyl
improver methacrylate
copolymer
P-03-0096 11/05/02 02/03/03 Henkel Loctite (S) A component of (S) Poly[oxy(methyl-
Corporation adhesive 1,2-ethanediyl)],
formulations for alpha,alpha'-[1,3-
general industrial phenylenebis[(1-
bonding applications methylethylidene)
iminocarbonyl]]bis[.
omega.-[[[[3-
(trimethoxysilyl)pro
pyl]
amino]carbonyl]oxy]-
P-03-0097 11/05/02 02/03/03 CBI (G) Viscosity index (G) Alkyl
improver and pour methacrylate
point depressant copolymer
P-03-0098 11/04/02 02/02/03 The Dow Chemical (S) Polymer used in (G) Blocked,
Company foams and adhesives isocyanate
manufacture terminated urethane
prepolymer
P-03-0099 11/05/02 02/03/03 CBI (S) Industrial (S) 2-propenoic acid,
coatings 2-methyl-, butyl
ester, polymer with
butyl 2-propenoate,
ethenylbenzene and
2,5-furandione
P-03-0100 11/04/02 02/02/03 CBI (G) Reactant in (G) Amine polymer
thermoset coating
degree of
containment -- (c)
open, non-dispersive
use
P-03-0101 11/05/02 02/03/03 CBI (G) Rheology (G) Aliphatic ester
modifying component
of funtional fluid
P-03-0102 11/05/02 02/03/03 CBI (G) Rheology (G) Aliphatic esters
modifying component
of functional fluid
P-03-0103 11/05/02 02/03/03 CBI (G) Synthetic (G) Pentaerythritol
industrial lubricant and
for contained use dipentaerythritol
mixed esters of
branched and linear
fatty acids
P-03-0104 11/06/02 02/04/03 CBI (G) Agricultural (G) Tristyryl phenol
inert alkoxylate salt
P-03-0105 11/07/02 02/05/03 CBI (G) Carrier oil (G) Hydrotreated
component petroleum distillate
extract
P-03-0106 11/08/02 02/06/03 CBI (G) Surface treatment (G) Fluoropolyether
agent derivative
fluoronated
payurethane resin
P-03-0107 11/08/02 02/06/03 Epson EL Paso, Inc. (G) Binder resin for (S) 2-propenoic acid,
ink 2-methyl-, polymer
with butyl 2-
propenoate and
ethenylbenzene,
sodium salt
P-03-0108 11/12/02 02/10/03 CBI (G) Textile colorant (G) Substituted cyan
acetic acid pentyl
ester
P-03-0109 11/14/02 02/12/03 Morflex Inc. (S) Coating (G) Vinyl ether
(radiation curable); terminated polyester
inks (radiation polymer
curable); adhesives
(radiation curable)
P-03-0110 11/14/02 02/12/03 Estron Chemical, Inc. (G) Additive for (G) Optsa/epoxy resin
coatings industry.
P-03-0111 11/18/02 02/16/03 CBI (G) Material for (G) Modified
coating agent polyvinylalcohol
P-03-0112 11/18/02 02/16/03 CBI (S) Luminescent (G) Alkaline earth
pigment used in aluminate, rare
safetymarking tape, earth doped
signs, toys,
novelties
[[Page 77063]]
P-03-0113 11/18/02 02/16/03 CBI (G) Use as a (G) Modified evoh
component of food polymer
packaging and other
industrial uses.
P-03-0114 11/18/02 02/16/03 CBI (G) Use as a (G) Modified evoh
component of food polymer
packaging and other
industrial uses.
P-03-0115 11/18/02 02/16/03 CBI (G) Use as a (G) Modified evoh
component of food polymer
packaging and other
industrial uses
P-03-0116 11/19/02 02/17/03 Reterra (S) Intermediate for (G) Polyester polyol
polyester resins
P-03-0117 11/19/02 02/17/03 CBI (G) Pastic additive (G) Silicate
P-03-0118 11/19/02 02/17/03 Solutia Inc (S) Binder for (G) Epoxy modified
industrial coatings alkyd resin
P-03-0119 11/19/02 02/17/03 Solutia Inc (S) Binder for (G) Polyurethane
industrial coatings resin
P-03-0120 11/19/02 02/17/03 Johnson Polymer (G) Open, non- (G) Acrylic emulsion
dispersive use
P-03-0121 11/19/02 02/17/03 Johnson Polymer (G) Open, non- (G) Acrylic emulsion
dispersive use
P-03-0122 11/19/02 02/17/03 Johnson Polymer (G) Open, non- (G) Acrylic emulsion
dispersive use
P-03-0123 11/19/02 02/17/03 Johnson Polymer (G) Open, non- (G) Acrylic emulsion
dispersive use
P-03-0124 11/19/02 02/17/03 Johnson Polymer (G) Open, non- (G) Acrylic emulsion
dispersive use
P-03-0125 11/19/02 02/17/03 Johnson Polymer (G) Open, non- (G) Acrylic emulsion
dispersive use
P-03-0126 11/18/02 02/16/03 Scotia Ventures (S) Paper coating (S) Ethanaminium,
additive; wet-end n,n,n-trimethyl-2-
paper additive [(1-oxo-2-
propenyl)oxy]-,
chloride, polymers
with hydrolyzed
poly(vinyl acetate)
--------------------------------------------------------------------------------------------------------------------------------------------------------
*Entry left over from the October 2002 report.
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
II. 22 Notices of Commencement From: 11/02/02 to 11/19/02
----------------------------------------------------------------------------------------------------------------
Commencement/Import
Case No. Received Date Date Chemical
----------------------------------------------------------------------------------------------------------------
P-00-0899 11/13/02 11/01/02 (G) Urea alkoxy silane
P-00-1130 11/07/02 10/21/02 (G) Acetylenic alcohol
P-00-1131 11/07/02 10/15/02 (G) Alkynyl acetate
P-01-0173 11/13/02 11/06/02 (G) Silated urethane
polymer
P-01-0529 11/13/02 11/04/02 (G) Organo aluminium
complex
P-02-0207 11/07/02 10/30/02 (G) Quaternary salt
P-02-0234 11/04/02 10/26/02 (G) Sulphonated azo/
hydrazo dye
P-02-0235 11/04/02 10/26/02 (G) Sulphonated azo/
hydrazo dye
P-02-0515 11/19/02 11/13/02 (G) Silated urethane resin
P-02-0573 11/12/02 10/23/02 (G) Cycloaliphatic amine
adducts
P-02-0613 11/06/02 10/20/02 (G) Polyacrylate resin
P-02-0623 11/19/02 10/14/02 (G) Substituted cyan
acetic acid butylester
and butoxyethylester
P-02-0624 11/19/02 10/14/02 (G) Substituted cyan
acetic acid butylester
and butoxyethylester
P-02-0716 11/04/02 10/23/02 (G) Butyl acrylate,
polymer with styrene and
methylamino chloride
compounds, nitrate
P-02-0739 11/07/02 10/07/02 (G) Amine salt
P-02-0814 11/08/02 10/30/02 (G) Aliphatic unsaturated
ketone
P-02-0827 11/15/02 11/10/02 (G) Bisacylphosphinoxide
P-02-0838 11/04/02 10/22/02 (G) Dipentaerythritol
ester of branched and
linear fatty acids
P-02-0874 11/14/02 10/28/02 (S) Hexanedioic acid,
polymer with 2,2-dimethyl-
1,3-propanediol, 1,2-
ethanediamine, 1,6-
hexanediol, 3-hydroxy-2-
(hydroxymethyl)-2-
methylpropanoic acid and
1,1'-methylenebis[4-
isocyanatocyclohexane],
compound with nu,nu-
diethylethanamine
P-94-1901 11/15/02 10/25/02 (G) Blocked aliphatic
polyisocyanate
P-96-1499 11/07/02 10/09/02 (G) Aminoslkylmodified
silicone fluid
P-97-0074 11/14/02 11/08/02 (S) 1,2 ethanediamine,
monohydrochloride
----------------------------------------------------------------------------------------------------------------
[[Page 77064]]
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated:December 9, 2002.
Sandra R. Wilkins,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 02-31588 Filed 12-13-02; 8:45 am]
BILLING CODE 6560-50-S