Ptrack Logo
OMB No. 2010-0032
Performance Track Membership Renewal Application
2004















BAE Systems Controls




A050044






















Commitment 1

Noise
Noise
 All measurements should represent the performance level for the indicator across the entire facility. For many indicators, however, you may choose to focus your goal on a specific subset of the indicator, e.g. a specific material, a specific group of toxic air emissions, a particular waste component, a specific VOC, etc.All

Physical facility modifications in certain high-noise areas of our facility, including the cables braiding area.

No
Yes



2003 2006 
dBA  
80 70 


Actual goal


Normalizing is not necessary for this indicator.

Yes

Because we have a few operations where the noise exposure is above 50% of the 8-hr Permissible Exposure Limit (as defined by OSHA) we are required to have a hearing conservation program in place. (29 CFR 1910.95)
Our committment exceeds the requirement of the standard since the standard does not require that noise be reduced to 80 dB.


Commitment 2

Water Use
Total Water Use
 All measurements should represent the performance level for the indicator across the entire facility. For many indicators, however, you may choose to focus your commitment on a specific subset of the indicator, e.g. a specific material, a specific group of toxic air emissions, a particular waste component, a specific VOC, etc.All

Evaluation of all water-consuming processes, working with on-site contractors. Updates to restroom facilities as when feasible.

No
Yes



2003 2006 
Gallons  
20,033,587 18,500,000 


Normalized goal


number of controls and cables shipped

No



Commitment 3

Waste
Hazardous Waste Generation
 All measurements should represent the performance level for the indicator across the entire facility. For many indicators, however, you may choose to focus your commitment on a specific subset of the indicator, e.g. a specific material, a specific group of toxic air emissions, a particular waste component, a specific VOC, etc.All

A revision to our chemical management system. We are currently investigating point-of-use and other process material management alternatives.

No
Yes


In the table below, please enter your facility's amount of hazardous waste, broken down by waste management method. Please enter both the amounts that you manage currently and that you intend to manage in 2006. Include all hazardous waste that is treated on-site or sent off-site.
Reduce Hazardous Waste 
 2003 2006

Incineration 2,1771,959Pounds
Reused/recycled off-site 20,32718,294Pounds
Landfill 3,8033,423Pounds
Other off-site management
 Codes H077, H111, opr H141: Chemical Stabilization, other chemical precipitation.
1,5231,371Pounds
Treated on-site 12,23711,013Pounds
20.0318.03


Normalized goal


number of controls and cables shipped

Yes

We are subject to RCRA law applicable to large-quantity generators.

Our commitment exceeds requirements because RCRA does not require that we reduce our hazardous waste volume.



Commitment 4

Material Use
Hazardous Materials Use
 All measurements should represent the performance level for the indicator across the entire facility. For many indicators, however, you may choose to focus your commitment on a specific subset of the indicator, e.g. a specific material, a specific group of toxic air emissions, a particular waste component, a specific VOC, etc.Specific
The specific substance whose use we are committing to reducing is a 63/37 Tin/Lead solder paste used in surface-mount soldering process.

We plan to reduce waste in the surface-mount assembly areas, by reducing rework and by improving the precision of the solder-paste application.

No
Yes



2003 2006 
Pounds  
180 160 


Normalized goal


This unit will be based on a normalization factor that measures the output of the components of our products which are specifically run through the solder-paste process.

No




Attachments (if applicable) :



Section E: Self-Certification of Continued Program Participation



On behalf of BAE Systems Controls, I certify that:

  • I have read and agree to the terms and conditions for Membership Renewal and Participation in the National Environmental Performance Track, as specified in the National Environmental Performance Track Program Guide and in the Renewal Application Instructions;

  • I have personally examined and am familiar with the information contained in this Renewal Application. The information contained in this Renewal Application is, to the best of my knowledge and based on reasonable inquiry, true, accurate, and complete, and I have no reason to believe the facility would not meet all program requirements;

  • My facility has an environmental management system (EMS), as defined in the Performance Track EMS requirements, including systems to maintain compliance with all applicable Federal, State, tribal, and local environmental requirements in place at the facility, and the EMS will be maintained for the duration of the facility's participation in the program

  • My facility has conducted an objective assessment of its compliance with all Federal, State, tribal, and local environmental requirements, and the facility has corrected all identified instances of potential or actual noncompliance;

  • Based on the foregoing compliance assessment and subsequent corrective actions (if any were necessary), my facility is, to the best of my knowledge and based on reasonable inquiry, currently in compliance with applicable Federal, State, tribal, and local environmental requirements.


I agree that EPA's decision whether to accept participants into or remove them from the National Environmental Performance Track is wholly discretionary, and I waive any right that may exist under any law to challenge EPA's acceptance or removal decision.

I am the senior facility manager and fully authorized to execute this statement on behalf of the corporation or other legal entity whose facility is applying to this program.



______________________________________________________
Mr.  Todd D. Rash
Director, Operations
(260) 434-5000
todd.rash@baesystems.com
BAE Systems Controls
2000 Taylor Street
PO Box 2232
Fort Wayne, IN 46802
2000 Taylor Street
PO Box 2232
Fort Wayne, IN46802
A050044