Department of Labor Seal photos representing the workforce - digital imagery© copyright 2001 photodisc, inc.  
Department of Labor Seal    [skip navigational links]     Advanced Search | A-Z Index
Wood Products: Sawmills eToolWood Products: Sawmills eTool
Additional References Wood Products: Sawmills eTool User Guide
Wood Products: Sawmills eTool
Definitions Wood Products: Sawmills eTool Credits
Wood Products: Sawmills eTool
Log Handling
Wood Products: Sawmills eTool Log Handling, Sorting and Storing
Wood Products: Sawmills eTool Log Breakdown, Related Machinery and Facilities Wood Products: Sawmills eTool Dry Kilns and
Wood Products: Sawmills eTool Lumber Storage
Plant-Wide Hazards
  >> Plant-Wide Hazards
Health Hazards > Vibration
Chainsaws produce high levels of vibration, which can cause permanent damage to hands and arms. The risk of developing hand-arm vibration syndrome (HAVS) is dependent on the following factors:
  • vibration levels,
  • length of time the saw is used,
  • position and grips of the saw, and
  • coldness and wetness of the environment and the worker.
Exposure to HAVS could produce several adverse health effects such as the following:
  • circulatory disturbances, such as vibration white finger (VWF),
  • sensory nerve damage, and
  • muscle, bone and joint injury.
> Work Areas
> Health Hazards
>> Vibration
> Wood Dust
> Cobalt Dust
> UV Radiation
> Tick-borne Illnesses
> Noise and Hearing Loss
> Diesel Exhaust
> Poisonous Plants
> Chemicals
> Cold Stresses
> Heat Stresses
> Miscellaneous Log and Lumber Processing
> Traffic Flow/Control
> Electrical
> Lockout/Tagout

Early Signs and Symptoms Top
  • Intermittent (comes and goes) tingling (needles and pins sensation) of one or more fingers.

  • Blanching (white-color) of fingertips.

  • Pain in fingers that subsides in a short time.

Later Signs and Symptoms Top
  • Loss of sense of touch or numbness.

  • Blanching of entire fingers.

  • Loss of grip strength in hand and fingers.

  • Severe pain in fingers.

  • Carpal tunnel syndrome or pressure on nerves in a wrist.

  • Pain and loss of strength in arms.

  • Loss of finger dexterity or coordination.

Possible Solutions/Controls Top
  • Hand-held chain sawChoose chain saws with the lowest vibration level suitable for the job.

  • Allow adequate rest periods.

  • Rotate jobs.

  • Wear warm gloves when in cold temperatures, or anti-vibration gloves.

  • Perform routine chain saw maintenance.

  • Instruct workers not to grip saws too tightly.

  • Remind workers that smoking decreases blood flow to fingers.

  • Advise workers to exercise hands and fingers frequently to increase blood flow.

  • Educate workers and supervisors about vibration hazards and encourage them to report signs and symptoms of HAVS.

| Home | Log Handling | Log Breakdown | Dry Kilns | Lumber Storage |
| Plant-Wide Hazards | Definitions | Additional References | User Guide | Credits |

Back to Top Back to Top

Contact Us | Freedom of Information Act | Customer Survey
Privacy and Security Statement | Disclaimers
Occupational Safety & Health Administration
200 Constitution Avenue, NW
Washington, DC 20210