(a)(1) Miner means, for purposes of § § 48.3 through 48.10 of this subpart A, any person working in an underground mine and who is engaged in the extraction and production process, or engaged in shaft or slope construction, or who is regularly exposed to mine hazards, or who is a maintenance or service worker employed by the operator or a maintenance or service worker contracted by the operator to work at the mine for frequent or extended periods. This definition shall include the operator if the operator works underground on a continuing, even if irregular basis. Short-term, specialized contract workers, such as drillers and blasters, who are engaged in the extraction and production process or engaged in shaft or slope construction and who have received training under § 48.6 (Experienced miner training) of this subpart A may, in lieu of subsequent training under that section for each new employment, receive training under § 48.11 (Hazard training) of this subpart A. This definition does not include:
(i) Workers under subpart C of this part 48, engaged in the construction of major additions to an existing mine which requires the mine to cease operations;
(ii) Supervisory personnel subject to MSHA approved
State certification requirements; and,
(iii) Any person covered under paragraph (a)(2) of this
section.
(2) Miner means, for purposes
of § 48.11 (Hazard training) of this subpart A, any person working in an
underground mine, including any delivery, office, or scientific worker or
occasional, short-term maintenance or service worker contracted by the operator,
and any student engaged in academic projects involving his or her extended
presence at the mine. This definition excludes persons covered under paragraph
(a)(1) of this section and subpart C of this part.
(b) Experienced miner means:
(1) A miner who has completed MSHA-approved new miner training for underground miners or
training acceptable to MSHA from a State agency and who has had at least 12 months of
underground mining experience; or
(2) A supervisor who is certified under an MSHA-approved State certification program and who is
employed as an underground supervisor on October 6, 1998; or
(3) An experienced underground miner on February 3, 1999.
(c) New miner means a miner who is not an experienced
miner.
(d) Normal working hours means a period of time during which
a miner is otherwise scheduled to work. This definition does not preclude
scheduling training classes on the sixth or seventh working day if such a
work schedule has been established for a sufficient period of time to be
accepted as the operator's common practice. Miners shall be paid at a rate of
pay which shall correspond to the rate of pay they would have received had
they been performing their normal work tasks.
(e) Operator means any owner, lessee, or other person who
operates, controls or supervises an underground mine; or any independent
contractor identified as an operator performing services or construction at
such mine.
(f) Task means a work assignment that includes duties of a
job that occur on a regular basis and which requires physical abilities and
job knowledge.
(g) Act means the Federal Mine Safety and Health Act of
1977.
(4)(i) A person employed as an underground shaft or slope construction worker on June 28, 2006; or
(ii) A person who has six months of underground shaft or slope experience within 24 months before June 28, 2006.
For more information : See MSHA's Program Policy Manual