Regulation of Fuel and Fuel Additives: Gasoline and Diesel Fuel
Test Method Update
[Federal Register: October 2, 2003 (Volume 68, Number 191)]
[Rules and Regulations]
[Page 56776-56781]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr02oc03-3]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Part 80
[FRL-7566-3]
Regulation of Fuel and Fuel Additives: Gasoline and Diesel Fuel
Test Method Update
AGENCY: Environmental Protection Agency (EPA).
ACTION: Direct final rule.
-----------------------------------------------------------------------
SUMMARY: The Environmental Protection Agency (EPA) is taking action to
make certain fuel testing requirements more consistent and up-to-date
by having refiners and laboratories use the most current version of an
American Society of Testing and Materials (ASTM) analytical test
method.
Specifically, we are updating an ASTM designated analytical test
method, ASTM D 1319 to the most recent 2002a version which when adopted
will supersede earlier versions of this method in EPA's motor vehicle
[[Page 56777]]
fuel regulations. This method is designated in EPA regulations for
measuring chemical compositions in reformulated gasoline (RFG),
conventional gasoline (CG), and diesel fuel, specifically aromatics and
olefins in CG and RFG and aromatics in diesel fuel. These updates allow
for more consistent use of the same methodology across EPA motor
vehicle fuel regulations and incorporate improvements in the test
method procedures that will ensure better operation.
DATES: This direct final rule is effective December 1, 2003, unless we
receive adverse comments or a request for public hearing by November 3,
2003. If the Agency receives adverse comment or a request for public
hearing, we will withdraw this direct final rule by publishing a timely
withdrawal notice in the Federal Register.
The incorporation by reference of certain publications in this rule
is approved by the Director of the Office of the Federal Register as of
December 1, 2003.
ADDRESSES: If you wish to submit comments or request a public hearing,
you should send any written materials to the docket address listed and
to Joe Sopata, Chemist, Transportation & Regional Programs Division,
U.S. Environmental Protection Agency, 1200 Pennsylvania Avenue, NW.
(6406J), Washington, DC 20460 or by e-mail to sopata.joe@epa.gov.
Materials relevant to this direct final rule have been placed in docket
A-2002-15 and docket A-2001-21 located at the following address: EPA
Docket Center (EPA/DC), Public Reading Room, Room B102, EPA West
Building, 1301 Constitution Avenue, NW., Washington, DC. Dockets may be
inspected from 8:30 a.m. to 4:30 p.m., Monday through Friday, except on
government holidays. You may reach the Air Docket by telephone at (202)
566-1742 and by facsimile at (202) 566-1741. You may be charged a
reasonable fee for photocopying docket materials, as provided in 40 CFR
Part 2. Comments and data may be submitted by email to: a-and-r-docket@
epa.gov. All comments and data submitted in electronic form must
note the docket number, A-2002-15. No confidential business information
(CBI) should be submitted by e-mail.
FOR FURTHER INFORMATION CONTACT: If you would like further information
about this rule or to request a hearing, contact Joe Sopata, Chemist,
Transportation & Regional Programs Division, (202) 564-9034.
SUPPLEMENTARY INFORMATION: The contents of today's preamble are listed
in the following outline.
I. Regulated Entities
II. Rule Changes
A. Updating ASTM D 1319 Test Method to 2002a Year Version
III. Statutory and Executive Order Reviews
A. Executive Order 12866: Regulatory Planning and Review
B. Paperwork Reduction Act
C. Regulatory Flexibility Act (RFA)
D. Unfunded Mandates Reform Act
E. Executive Order 13132: Federalism
F. Executive Order 13175: Consultation and Coordination With
Indian Tribal Governments
G. Executive Order 13045: Protection of Children from
Environmental Health & Safety Risks
H. Executive Order 13211: Actions that Significantly Affect
Energy Supply, Distribution, or Use
I. National Technology Transfer Advancement Act
J. Congressional Review Act
VI. Statutory Provisions and Legal Authority
I. Regulated Entities
Entities potentially affected by this action include those involved
with the production, importation, distribution, sale and storage of
gasoline motor fuel and diesel motor fuel.
The table below gives some examples of entities that may have to
comply with the regulations. However, since these are only examples,
you should carefully examine these and other existing regulations in 40
CFR part 80. If you have any questions, please call the person listed
in the FOR FURTHER INFORMATION CONTACT section above.
------------------------------------------------------------------------
NAICSs
Category codes a SIC codes b Examples of potentially
regulated parties
------------------------------------------------------------------------
Industry.... 32411 2911 Petroleum refiners.
Industry.... 54138 8734 Testing Laboratories.
------------------------------------------------------------------------
a North American Industry Classification System (NAICS).
b Standard Industrial Classification (SIC) system code.
II. Rule Changes
A. Updating ASTM D 1319 Test Method to 2002a Year Version
Refiners, importers and oxygenate blenders producing gasoline and
diesel motor vehicle fuel are required to test Reformulated Gasoline
(RFG), Conventional Gasoline (CG) and diesel fuel for various fuel
parameters including olefins, and aromatics. ASTM test method D1319 is
currently a designated test method for measuring olefins \1\ in
gasoline and aromatics \2\ in diesel fuel and is also allowed as an
alternative test method for measuring aromatics \3\ in gasoline.
Because rules were adopted at different points in time, the regulations
currently cite three different versions of D 1319 (published in three
different years) for these applications.
---------------------------------------------------------------------------
\1\ 40 CFR 80.46(b).
\2\ 40 CFR 80.2(z).
\3\ 40 CFR 80.46(f)(3).
---------------------------------------------------------------------------
On February 26, 2002, the Agency published a final rule entitled
``Regulation of Fuel and Fuel Additives: Reformulated Gasoline
Transition''.\4\ Among other things, this final rule updated certain
ASTM test methods for RFG and CG, designated in EPA regulations, to
their most recent ASTM version. Several designated test methods were
updated to their most recent version including methods covering oxygen
content, distillation properties, RVP, and aromatics. The designated
test method for olefins, ASTM D 1319, was updated by EPA only to its
1998 version and not to the most recent version. This was because the
1999 version of ASTM D 1319 (the most recent version at that time) had
mistakenly left out an important reference to use of another ASTM
method. ASTM D 5599-00, the missing test method, measures oxygenate
concentration when present in the gasoline sample. Measurement of
oxygenate content when oxygenates are present is a required procedure
when determining olefin content. Therefore, since ASTM D 5599-00 is
EPA's designated method for oxygenate determination, omission of this
procedure in the 1999 version of ASTM 1319 meant that it would not be
appropriate for EPA to adopt that version of ASTM 1319. We explained in
our response to comments that ``unless a determination is made that
ASTM D 5599-00 can be appropriately included as a method for measuring
oxygen and oxygen content with ASTM D 1319-99, EPA will retain the 1998
version of D
[[Page 56778]]
1319 as the designated test method for olefins''.\5\
---------------------------------------------------------------------------
\4\ February 26, 2002, (67 FR 8729).
\5\ See Air Docket # A-2001-21, Document # V-C-01.
---------------------------------------------------------------------------
Recently, David Bradley, the ASTM Director of Committee D02 for
Petroleum Products and Lubricants, said in a letter to EPA that ASTM
has updated test method D1319 to a 2002 year version.\6\ Mr. Bradley
also pointed out that this most recent version of ASTM D 1319 now
includes the reference to ASTM D 5599 thus resolving the problem
associated with omission of EPA's designated test method for oxygen and
oxygen content. The American Petroleum Institute (API) also submitted
comments to EPA in support of this test method update of ASTM D 1319 to
the 2002 year version.\7\ Thus, both ASTM and API support revising our
motor vehicle fuels regulations to allow the use of D1319-02a for
testing of olefins.
---------------------------------------------------------------------------
\6\ See Air Docket # A-2002-15, Document # II-D-01.
\7\ See Air Docket # A-2002-15, Document # II-D-02.
---------------------------------------------------------------------------
In addition to updating our regulations to allow for the use of
ASTM D 1319-02a for determining olefins in gasoline (discussed above),
we are also today taking action to allow use of the newest version of
D1319 for determination of aromatics content in RFG and CG (as an
alternative method) and in determining aromatics content in diesel
motor fuel. Previous versions of ASTM D1319 were allowed for
determining aromatic content under previous rulemakings.
Table 1 lists the designated analytical test methods and
alternative analytical test methods which are being updated for
parameters measured under RFG, CG, and diesel fuels program in today's
action. We have reviewed the 2002a version of ASTM test method D 1319
and we are in agreement with its revisions. We believe that the
revisions in ASTM D 1319-02a are not significant changes that would
cause a user of an older version of the same method to incur
significant costs. All of the revisions were deemed necessary by ASTM
so that improvements in the test method's procedures would ensure
better operation for the user of the test method. By updating ASTM D
1319 to the 2002a version for all three of these applications, the
required analytical methodologies will be more consistent, making it
easier for manufacturers of gasoline and diesel fuel to utilize the
ASTM technique for all fuels and properties being tested.
Table 1.--Designated & Alternative Analytical Test Methods Under RFG, CG
& Diesel Fuel Programs
------------------------------------------------------------------------
Fuel parameter Analytical test method
------------------------------------------------------------------------
Olefins................................ ASTM D 1319-02a, entitled,
``Standard Test Method for
Hydrocarbon Types in Liquid
Petroleum Products by
Fluorescent Indicator
Absorption.''
Aromatics (gasoline and diesel)........ ASTM D 1319-02a, entitled,
``Standard Test Method for
Hydrocarbon Types in Liquid
Petroleum Products by
Fluorescent Indicator
Absorption'', for diesel fuel,
this method is the designated
test method, for gasoline,
this method is an alternative
test method and if used as an
alternative method, its
results must be correlated to
ASTM D 5769-98.
------------------------------------------------------------------------
In the ``Proposed Rules'' section of today's Federal Register, we
are publishing a proposed rule that matches the substance of this
direct final rule. If the Agency receives adverse comment or a request
for public hearing by November 3, 2003, we will withdraw the direct
final rule by publishing a timely withdrawal notice in the Federal
Register. If the Agency receives no adverse comment or a request for
public hearing by November 3, 2003, these test method changes will be
effective sixty (60) days after publication of this direct final rule
in the Federal Register. We are confident that sixty(60) days is
sufficient lead time for industry to become familiar and implement this
most recent ASTM test method for the applications mentioned above.
III. Statutory and Executive Order Reviews
A. Executive Order 12866: Regulatory Planning and Review
Under Executive Order 12866, (58 FR 51735 (October 4, 1993)) the
Agency must determine whether the regulatory action is ``significant''
and therefore subject to OMB review and the requirements of the
Executive Order. The Order defines ``significant regulatory action'' as
one that is likely to result in a rule that may:
(1) Have an annual effect on the economy of $100 million or more or
adversely affect in a material way the economy, a sector of the
economy, productivity, competition, jobs, the environment, public
health or safety, or State, local, or tribal governments or
communities;
(2) Create a serious inconsistency or otherwise interfere with an
action taken or planned by another agency;
(3) Materially alter the budgetary impact of entitlements, grants,
user fees, or loan programs or the rights and obligations of recipients
thereof; or
(4) Raise novel legal or policy issues arising out of legal
mandates, the President's priorities, or the principles set forth in
the Executive Order.
Pursuant to the terms of Executive Order 12866, we have determined
that this direct final rule is not a significant regulatory action.
B. Paperwork Reduction Act
This action does not add any new requirements involving the
collection of information as defined by the Paperwork Reduction Act, 44
U.S.C. 3501 et seq. The Office of Management and Budget (OMB) has
approved the information collection requirements contained in the final
RFG/anti-dumping rulemaking (See 59 FR 7716, February 16, 1994) and has
assigned OMB control number 2060-0277 (EPA ICR No. 1591.14). The OMB
has approved the information collection requirements contained in the
final Tax Exempt (Dyed) Highway Diesel Fuel rulemaking (See 66 FR
64817, December 14, 2001) and has assigned OMB control number 2060-0308
(EPA ICR No. 1718.03).
Burden means the total time, effort, or financial resources
expended by persons to generate, maintain, retain, or disclose or
provide information to or for a Federal agency. This includes the time
needed to review instructions; develop, acquire, install, and utilize
technology and systems for the purposes of collecting, validating, and
verifying information, processing and maintaining information, and
disclosing and providing information; adjust the existing ways to
comply with any
[[Page 56779]]
previously applicable instructions and requirements; train personnel to
be able to respond to a collection of information; search data sources;
complete and review the collection of information; and transmit or
otherwise disclose the information. An Agency may not conduct or
sponsor, and a person is not required to respond to a collection of
information unless it displays a currently valid OMB control number.
The OMB control numbers for EPA's regulations are listed in 40 CFR Part
9 and 48 CFR Chapter 15.
C. Regulatory Flexibility Act
The Regulatory Flexibility Act (RFA) generally requires an agency
to prepare a regulatory flexibility analysis of any rule subject to
notice and comment rulemaking requirements under the Administrative
Procedure Act or any other statute unless the agency certifies that the
rule will not have a significant economic impact on a substantial
number of small entities. Small entities include small businesses,
small organizations, and small governmental jurisdictions.
For purposes of assessing the impacts of today's direct final rule
on small entities, small entity is defined as: (1) A small business
that has not more than 1,500 employees (13 CFR 121.201); (2) a small
governmental jurisdiction that is a government of a city, county, town,
school district or special district with a population of less than
50,000; and (3) a small organization that is any not-for-profit
enterprise which is independently owned and operated and is not
dominant in its field.
After considering the economic impacts of today's direct final rule
on small entities, we believe that this action will not have a
significant economic impact on a substantial number of small entities.
We have determined that no small entities will experience an impact
from this direct final rule. ASTM test method D 1319 is currently a
designated test method for measuring olefins in gasoline and aromatics
in diesel fuel and is also allowed as an alternative test method for
measuring aromatics in gasoline (see citations above in Section II.A).
Because rules were adopted at different points in time, the regulations
currently cite three different versions of ASTM D 1319 (published in
three different years) for these applications. Currently, if a small
entity produces both gasoline and diesel fuel, and it relies on ASTM D
1319 for determining compliance with the fuel parameters mentioned
above, it must maintain three different versions of ASTM D 1319. These
updates allow for more consistent use of the same methodology across
EPA motor vehicle fuel regulations, thus increasing flexibility for
small entities who manufacture gasoline or diesel fuel. Thus this
direct final rule is expected to reduce operating costs for all
parties, including small entities.
Although this direct final rule will not have a significant impact
on a substantial number of small entities, EPA has nonetheless tried to
reduce the impact of this rule on small entities. If the Agency
receives no adverse comment or request for public hearing on the
corresponding proposed rule to this direct final rule, these test
method changes will be effective sixty (60) days after publication of
this direct final rule in the Federal Register. We are confident that
sixty (60) days is sufficient lead time for small entities to become
familiar and implement this ASTM test method for its applications.
D. Unfunded Mandates Reform Act
Title II of the Unfunded Mandates Reform Act of 1995 (UMRA), Public
Law 104-4, establishes requirements for Federal agencies to assess the
effects of their regulatory actions on State, local, and tribal
governments and the private sector. Under section 202 of the UMRA, EPA
generally must prepare a written statement, including a cost-benefit
analysis, for proposed and final rules with ``Federal mandates'' that
may result in expenditures to State, local, and tribal governments, in
the aggregate, or to the private sector, of $100 million or more in any
one year. Before promulgating an EPA rule for which a written statement
is needed, section 205 of the UMRA generally requires EPA to identify
and consider a reasonable number of regulatory alternatives and adopt
the least costly, most cost-effective or least burdensome alternative
that achieves the objectives of the rule. The provisions of section 205
do not apply when they are inconsistent with applicable law. Moreover,
section 205 allows EPA to adopt an alternative other than the least
costly, most cost-effective or least burdensome alternative if the
Administrator publishes with the final rule an explanation why that
alternative was not adopted. Before EPA establishes any regulatory
requirements that may significantly or uniquely affect small
governments, including tribal governments, it must have developed under
section 203 of the UMRA a small government agency plan. The plan must
provide for notifying potentially affected small governments, enabling
officials of affected small governments to have meaningful and timely
input in the development of EPA regulatory proposals with significant
Federal intergovernmental mandates, and informing, educating, and
advising small governments on compliance with the regulatory
requirements.
Today's direct final rule contains no Federal mandates (under the
regulatory provisions of Title II of the UMRA) for State, local or
tribal governments or the private sector. The rule would impose no
enforceable duty on any State, local or tribal governments or the
private sector. This rule applies to gasoline refiners, blenders and
importers that supply gasoline or diesel fuel.
E. Executive Order 13132: Federalism
Executive Order 13132, entitled ``Federalism'' (64 FR 43255, August
10, 1999), requires EPA to develop an accountable process to ensure
``meaningful and timely input by State and local officials in the
development of regulatory policies that have federalism implications.''
``Policies that have federalism implications'' is defined in the
Executive Order to include regulations that have ``substantial direct
effects on the States, on the relationship between the national
government and the States, or on the distribution of power and
responsibilities among the various levels of government.''
This direct final rule does not have federalism implications. It
will not have substantial direct effects on the States, on the
relationship between the national government and the States, or on the
distribution of power and responsibilities among the various levels of
government, as specified in Executive Order 13132. This direct final
rule updates an ASTM test method to its most recent version. Thus,
Executive Order 13132 does not apply to this direct final rule.
In the spirit of Executive Order 13132, and consistent with EPA
policy to promote communications between EPA and State and local
governments, EPA specifically solicits comment on this direct final
rule's corresponding proposed rule from State and local officials.
F. Executive Order 13175: Consultation and Coordination With Indian
Tribal Governments
Executive Order 13175, entitled ``Consultation and Coordination
with Indian Tribal Governments'' (59 FR 22951, November 6, 2000),
requires EPA to develop an accountable process to ensure ``meaningful
and timely input by tribal officials in the development of regulatory
policies that have tribal implications.'' ``Policies that have tribal
implications'' is defined in the Executive Order to include regulations
that have ``substantial direct effects on
[[Page 56780]]
one or more Indian tribes, on the relationship between the Federal
government and the Indian tribes, or on the distribution of power and
responsibilities between the Federal government and Indian tribes.''
This direct final rule does not have tribal implications. It will
not have substantial direct effects on tribal governments, on the
relationship between the Federal government and Indian tribes, or on
the distribution of power and responsibilities between the Federal
government and Indian tribes, as specified in Executive Order 13175.
This direct final rule applies to gasoline refiners, blenders and
importers that supply gasoline or diesel fuel. Today's action updates
an ASTM test method to its most recent version, and does not impose any
enforceable duties on communities of Indian tribal governments. Thus,
Executive Order 13175 does not apply to this direct final rule.
G. Executive Order 13045: Protection of Children From Environmental
Health & Safety Risks
Executive Order 13045: ``Protection of Children from Environmental
Health Risks and Safety Risks'' (62 FR 19885, April 23, 1997) applies
to any rule that: (1) is determined to be ``economically significant''
as defined under Executive Order 12866, and (2) concerns an
environmental health or safety risk that EPA has reason to believe may
have a disproportionate effect on children. If the regulatory action
meets both criteria, the Agency must evaluate the environmental health
or safety effects of the planned rule on children, and explain why the
planned regulation is preferable to other potentially effective and
reasonably feasible alternatives considered by the Agency.
EPA interprets Executive Order 13045 as applying only to those
regulatory actions that are based on health or safety risks, such that
the analysis required under section 5-501 of the Order has the
potential to influence the regulation. This rule is not subject to
Executive Order 13045 because it does not establish an environmental
standard intended to mitigate health or safety risks.
H. Executive Order 13211: Actions That Significantly Affect Energy
Supply, Distribution, or Use
This direct final rule is not an economically ``significant energy
action'' as defined in Executive Order 13211, ``Actions Concerning
Regulations That Significantly Affect Energy Supply, Distribution, or
Use'' (66 FR 28355 (May 22, 2001)) because it does not have a
significant adverse effect on the supply, distribution, or use of
energy. EPA is allowing additional flexibility and streamlining the
regulations by updating an ASTM test method to its most current version
for three applications under its motor vehicle programs.
I. National Technology Transfer Advancement Act
Section 12(d) of the National Technology Transfer and Advancement
Act of 1995 (``NTTAA''), Public Law No. 104-113, section 12(d) (15
U.S.C. 272 note) directs EPA to use voluntary consensus standards in
its regulatory activities unless to do so would be inconsistent with
applicable law or otherwise impractical. Voluntary consensus standards
are technical standards (e.g., materials specifications, test methods,
sampling procedures, and business practices) that are developed or
adopted by voluntary consensus standards bodies. The NTTAA directs EPA
to provide Congress, through OMB, explanations when the Agency decides
not to use available and applicable voluntary consensus standards.
This rule will update an ASTM test method which is a designated
analytical test method for two applications and an alternative test
method for one application to its most recent ASTM version. Today's
action does not establish new technical standards or analytical test
methods, although it does update an ASTM test method to its most
current version. To the extent that this action would allow the use of
standards developed by voluntary consensus bodies (such as ASTM) this
action would further the objectives of the NTTAA.
J. Congressional Review Act
The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the
Small Business Regulatory Enforcement Fairness Act of 1996, generally
provides that before a rule may take effect, the agency promulgating
the rule must submit a rule report, which includes a copy of the rule,
to each House of the Congress and to the Comptroller General of the
United States. EPA will submit a report containing this rule and other
required information to the U. S. Senate, the U. S. House of
Representatives, and the Comptroller General of the United States prior
to publication of the rule in the Federal Register. A ``major rule''
cannot take effect until 60 days after it is published in the Federal
Register. This action is not a ``major rule'' as defined by 5 U.S.C.
804(a).
VI. Statutory Provisions and Legal Authority
Statutory authority for today's direct final rule comes from
sections 211(c), 211(i) and 211(k) of the CAA (42 U.S.C. 7545(c) and
(k)). Section 211(c) and 211(i) allows EPA to regulate fuels that
contribute to air pollution which endangers public health or welfare,
or which impairs emission control equipment. Section 211(k) prescribes
requirements for RFG and conventional gasoline and requires EPA to
promulgate regulations establishing these requirements. Additional
support for the fuels controls in today's rule comes from sections
114(a) and 301(a) of the CAA.
List of Subjects in 40 CFR Part 80
Environmental protection, Air pollution control, Fuel additives,
Gasoline, Diesel, Imports, Incorporation by reference, Motor vehicle
pollution, Reporting and recordkeeping requirements.
Dated: September 24, 2003.
Marianne Lamont Horinko,
Acting Administrator.
? For the reasons set forth in the preamble, part 80 of title 40, chapter
I of the Code of Federal Regulations is amended as follows:
PART 80--REGULATION OF FUELS AND FUEL ADDITIVES
? 1. The authority citation for part 80 continues to read as follows:
Authority: 42 U.S.C. 7414, 7545 and 7601(a).
? 2. Section 80.2 is amended by revising paragraphs (z) to read as
follows:
Sec. 80.2 Definitions.
* * * * *
(z) Aromatic content is the aromatic hydrocarbon content in volume
percent as determined by ASTM standard test method D 1319-02a,
entitled, ``Standard Test Method for Hydrocarbon Types in Liquid
Petroleum Products by Fluorescent Indicator Adsorption''. ASTM test
method D 1319-02a is incorporated by reference. This incorporation by
reference was approved by the Director of the Federal Register in
accordance 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained
from the American Society for Testing and Materials, 100 Barr Harbor
Dr., West Conshohocken, PA 19428-2959. Copies may be inspected at the
Air Docket Center, room B-108, U.S. Environmental Protection Agency,
Docket No. A-2202-15, 1200 Pennsylvania Avenue, NW.,
[[Page 56781]]
Washington, DC 20460, or at the Office of the Federal Register,
National Archives and Records Administration, 800 North Capitol Street,
NW., Suite 700, Washington, DC.
* * * * *
? 3. Section 80.46 is amended by revising paragraphs (b), (f)(3)(i), and
(h) to read as follows:
Sec. 80.46 Measurement of reformulated gasoline fuel parameters.
* * * * *
(b) Olefins. Olefin content shall be determined using ASTM standard
method D 1319-02a, entitled ``Standard Test Method for Hydrocarbon
Types in Liquid Petroleum Products by Fluorescent Indicator
Adsorption.''
* * * * *
(f) * * *
(3) (i) Prior to September 1, 2004, any refiner or importer may
determine aromatics content using ASTM standard method D 1319-02a,
entitled ``Standard Test Method for Hydrocarbon Types in Liquid
Petroleum Products by Flourescent Indicator Adsorption,'' for purposes
of meeting any testing requirement involving aromatics content;
provided that
* * * * *
(h) Incorporations by reference. ASTM standard methods D 3606-99,
entitled ``Standard Test Method for Determination of Benzene and
Toluene in Finished Motor and Aviation Gasoline by Gas
Chromatography;'' D 1319-02a, entitled ``Standard Test Method for
Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator
Adsorption;'' D 4815-99, entitled ``Standard Test Method for
Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and
C1 to C4 Alcohols in Gasoline by Gas
Chromatography;'' D 2622-98, entitled ``Standard Test Method for Sulfur
in Petroleum Products by Wavelength Dispersive X-Ray Fluorescence
Spectrometry;'' D 3246-96, entitled ``Standard Test Method for Sulfur
in Petroleum Gas by Oxidative Microcoulometry;'' D 5191-01, entitled,
``Standard Test Method for Vapor Pressure of Petroleum Products (Mini
Method);'' D 5599-00, entitled, ``Standard Test Method for
Determination of Oxygenates in Gasoline by Gas Chromatography and
Oxygen Selective Flame Ionization Detection;'' D 5769-98, entitled,
``Standard Test Method for Determination of Benzene, Toluene, and Total
Aromatics in Finished Gasolines by Gas Chromatography/Mass
Spectrometry,'' and D 86-01, entitled, ``Standard Test Method for
Distillation of Petroleum Products at Atmospheric Pressure;'' are
incorporated by reference in this section. These incorporations by
reference were approved by the Director of the Federal Register in
accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be
obtained from the American Society for Testing and Materials, 100 Barr
Harbor Dr., West Conshohocken, PA 19428-2959. Copies may be inspected
at the Air Docket Center, room B-108, U.S. Environmental Protection
Agency, Docket No. A-2202-15, 1200 Pennsylvania Avenue, NW.,
Washington, DC 20460, or at the Office of the Federal Register,
National Archives and Records Administration, 800 North Capitol Street,
NW., Suite 700, Washington, DC.
[FR Doc. 03-24907 Filed 10-1-03; 8:45 am]
BILLING CODE 6560-50-P
![[logo] US EPA](https://webarchive.library.unt.edu/eot2008/20090510211050im_/http://www.epa.gov/epafiles/images/logo_epaseal.gif){kind=logo}