|
Home Page > Executive Branch > Code of Federal Regulations > Electronic Code of Federal Regulations
e-CFR Data is current as of November 4, 2008
TITLE 40--Protection of Environment
CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER I--SOLID WASTES
PART 265--INTERIM STATUS STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE, AND DISPOSAL FACILITIES
Subpart A--GENERAL
|
| Purpose, scope, and applicability. |
|
Subpart B--GENERAL FACILITY STANDARDS
|
| General inspection requirements. |
|
|
| General requirements for ignitable, reactive, or incompatible wastes. |
|
|
| Construction quality assurance program. |
|
Subpart C--PREPAREDNESS AND PREVENTION
|
| Maintenance and operation of facility. |
|
|
| Testing and maintenance of equipment. |
|
|
| Access to communications or alarm system. |
|
|
| Arrangements with local authorities. |
|
Subpart D--CONTINGENCY PLAN AND EMERGENCY PROCEDURES
|
| Purpose and implementation of contingency plan. |
|
|
| Content of contingency plan. |
|
|
| Copies of contingency plan. |
|
|
| Amendment of contingency plan. |
|
Subpart E--MANIFEST SYSTEM, RECORDKEEPING, AND REPORTING
|
| Availability, retention, and disposition of records. |
|
|
| Unmanifested waste report. |
|
Subpart F--GROUND-WATER MONITORING
|
| Ground-water monitoring system. |
|
|
| Preparation, evaluation, and response. |
|
|
| Recordkeeping and reporting. |
|
Subpart G--CLOSURE AND POST-CLOSURE
|
| Closure performance standard. |
|
|
| Closure plan; amendment of plan. |
|
|
| Closure; time allowed for closure. |
|
|
| Disposal or decontamination of equipment, structures and soils. |
|
|
| Certification of closure. |
|
|
| Post-closure care and use of property. |
|
|
| Post-closure plan; amendment of plan. |
|
|
| Certification of completion of post-closure care. |
|
|
| Post-closure requirements for facilities that obtain enforceable documents in lieu of post-closure permits. |
|
Subpart H--FINANCIAL REQUIREMENTS
|
| Definitions of terms as used in this subpart. |
|
|
| Cost estimate for closure. |
|
|
| Financial assurance for closure. |
|
|
| Cost estimate for post-closure care. |
|
|
| Financial assurance for post-closure care. |
|
|
| Use of a mechanism for financial assurance of both closure and post-closure care. |
|
|
| Incapacity of owners or operators, guarantors, or financial institutions. |
|
|
| Use of State-required mechanisms. |
|
|
| State assumption of responsibility. |
|
Subpart I--USE AND MANAGEMENT OF CONTAINERS
|
| Compatibility of waste with container. |
|
|
| Management of containers. |
|
|
| Special requirements for ignitable or reactive waste. |
|
|
| Special requirements for incompatible wastes. |
|
Subpart J--TANK SYSTEMS
|
| Assessment of existing tank system's integrity. |
|
|
| Design and installation of new tank systems or components. |
|
|
| Containment and detection of releases. |
|
|
| General operating requirements. |
|
|
| Response to leaks or spills and disposition of leaking or unfit-for-use tank systems. |
|
|
| Closure and post-closure care. |
|
|
| Special requirements for ignitable or reactive wastes. |
|
|
| Special requirements for incompatible wastes. |
|
|
| Waste analysis and trial tests. |
|
|
| Special requirements for generators of between 100 and 1,000 kg/mo that accumulate hazardous waste in tanks. |
|
Subpart K--SURFACE IMPOUNDMENTS
|
| Design and operating requirements. |
|
|
| Waste analysis and trial tests. |
|
|
| Monitoring and inspection. |
|
|
| Closure and post-closure care. |
|
|
| Special requirements for ignitable or reactive waste. |
|
|
| Special requirements for incompatible wastes. |
|
Subpart L--WASTE PILES
|
| Design and operating requirements. |
|
|
| Special requirements for ignitable or reactive waste. |
|
|
| Special requirements for incompatible wastes. |
|
|
| Closure and post-closure care. |
|
|
| Monitoring and inspection. |
|
Subpart M--LAND TREATMENT
|
| General operating requirements. |
|
|
| Unsaturated zone (zone of aeration) monitoring. |
|
|
| Closure and post-closure. |
|
|
| Special requirements for ignitable or reactive waste. |
|
|
| Special requirements for incompatible wastes. |
|
Subpart N--LANDFILLS
|
| Design and operating requirements. |
|
|
| Monitoring and inspection. |
|
|
| Surveying and recordkeeping. |
|
|
| Closure and post-closure care. |
|
|
| Special requirements for ignitable or reactive waste. |
|
|
| Special requirements for incompatible wastes. |
|
|
| Special requirements for bulk and containerized liquids. |
|
|
| Special requirements for containers. |
|
|
| Disposal of small containers of hazardous waste in overpacked drums (lab packs). |
|
Subpart O--INCINERATORS
|
| General operating requirements. |
|
|
| Monitoring and inspections. |
|
|
| Interim status incinerators burning particular hazardous wastes. |
|
Subpart P--THERMAL TREATMENT
|
| General operating requirements. |
|
|
| Monitoring and inspections. |
|
|
| Open burning; waste explosives. |
|
|
| Interim status thermal treatment devices burning particular hazardous waste. |
|
Subpart Q--CHEMICAL, PHYSICAL, AND BIOLOGICAL TREATMENT
|
| General operating requirements. |
|
|
| Waste analysis and trial tests. |
|
|
| Special requirements for ignitable or reactive waste. |
|
|
| Special requirements for incompatible wastes. |
|
Subpart R--UNDERGROUND INJECTION
Subparts S-V--[RESERVED]
Subpart W--DRIP PADS
|
| Assessment of existing drip pad integrity. |
|
|
| Design and installation of new drip pads. |
|
|
| Design and operating requirements. |
|
Subparts X-Z--[RESERVED]
Subpart AA--AIR EMISSION STANDARDS FOR PROCESS VENTS
|
| Standards: Process vents. |
|
|
| Standards: Closed-vent systems and control devices. |
|
|
| Test methods and procedures. |
|
|
| Recordkeeping requirements. |
|
Subpart BB--AIR EMISSION STANDARDS FOR EQUIPMENT LEAKS
|
| Standards: Pumps in light liquid service. |
|
|
| Standards: Pressure relief devices in gas/vapor service. |
|
|
| Standards: Sampling connection systems. |
|
|
| Standards: Open-ended valves or lines. |
|
|
| Standards: Valves in gas/vapor service or in light liquid service. |
|
|
| Standards: Pumps and valves in heavy liquid service, pressure relief devices in light liquid or heavy liquid service, and flanges and other connectors. |
|
|
| Standards: Delay of repair. |
|
|
| Standards: Closed-vent systems and control devices. |
|
|
| Alternative standards for valves in gas/vapor service or in light liquid service: percentage of valves allowed to leak. |
|
|
| Alternative standards for valves in gas/vapor service or in light liquid service: skip period leak detection and repair. |
|
|
| Test methods and procedures. |
|
|
| Recordkeeping requirements. |
|
Subpart CC--AIR EMISSION STANDARDS FOR TANKS, SURFACE IMPOUNDMENTS, AND CONTAINERS
|
| Schedule for implementation of air emission standards. |
|
|
| Waste determination procedures. |
|
|
| Standards: Surface impoundments. |
|
|
| Standards: Closed-vent systems and control devices. |
|
|
| Inspection and monitoring requirements. |
|
|
| Recordkeeping requirements. |
|
Subpart DD--CONTAINMENT BUILDINGS
|
| Design and operating standards. |
|
|
| Closure and post-closure care. |
|
Subpart EE--HAZARDOUS WASTE MUNITIONS AND EXPLOSIVES STORAGE
|
| Design and operating standards. |
|
|
| Closure and post-closure care. |
|
February 27, 2007< !-- #EndDate -- >-->
|
