Appendix to Subpart F of Part 655--Alternate Method of Determining the Color of Retroreflective Sign Materials 1. The FHWA Color Tolerance Charts provide that conventional color measuring instruments such as spectrophotometers and tristimulus photoelectric colorimeters should not be used for measurement of retroreflective material colors and that such materials should be evaluated visually using the Color Tolerance Charts and paying strict attention to prescribed illumination and viewing conditions. 2. As an alternate to visual testing, the diffuse day color of retroreflective sign material may be determined in accordance with ASTM E 97, ``Standard Method of Test for 45-Degree, 0-Degree Directional Reflectance of Opaque Specimens by Filter Photometry.'' Geometric characteristics must be confined to illumination incident within 10 degrees of, and centered about, a direction of 45 degrees from the perpendicular to the test surface; viewing is within 15 degrees of, and centered about, the perpendicular to the test surface. Conditions of illumination and observation must not be interchanged. 3. Standards to be used for reference are the Munsell Papers designated in Table 1 or Table II, attached. The papers must be recently calibrated on a spectrophotometer. Acceptable test instruments are: a. Gardner Multipurpose Reflectometer or Model XL 20 Color Difference Meter, b. Gardner Model Ac-2a or XL 30 Color Difference Meter, c. Meeco Model V Colormaster, d. Hunter lab D25 Color Difference Meter, or e. Approved equal. 4. Average performance sheeting is identified as Types I and II sheeting and high performance sheeting is identified as Types III and IV sheeting in Standard Specifications for Construction of Roads and Bridges on Federal Highway Projects \3\ (FP-79, Section 633). --------------------------------------------------------------------------- \3\ This document is available for inspection and copying as prescribed in 49 CFR part 7, appendix D. Table I--Color Specification Limits and Reference Standards, Types I and II Sheeting -------------------------------------------------------------------------------------------------------------------------------------------------------- Chromaticity coordinates \1\ (corner points) Reflectance ---------------------------------------------------------------- limits (percent Color 1 2 3 4 Y) Y Reference \3\ standard --------------------------------------------------------------------------------- (munsell papers) x y x y x y x y Minium Maximum -------------------------------------------------------------------------------------------------------------------------------------------------------- White \2\................................ .305 .290 .350 .342 .321 .361 .276 .308 35 -- 6.3Gy 6.77/0.8. Red...................................... .602 .317 .664 .336 .644 .356 .575 .356 8 12 8.2R 3.78/14.0. Orange................................... .535 .375 .607 .393 .582 .417 .535 .399 18 30 2.5YR 5.5/14.0 Brown.................................... .445 .353 .604 .396 .556 .443 .445 .386 4 9 5.OYR 3/6. Yellow................................... .482 .450 .532 .465 .505 .494 .475 .485 29 45 1.25Y 6/12. [[Page 248]] Green.................................... .130 .369 .180 .391 .155 .460 .107 .439 3.5 9 0.65BG 2.84/8.45. Blue..................................... .147 .075 .176 .091 .176 .151 .106 .113 1.0 4 5 8PB 1.32/6.8. -------------------------------------------------------------------------------------------------------------------------------------------------------- \1\ The four pairs of chromaticity coordinates determine the acceptable color in terms of the CIE 1931 standard colorimetric system measured with standard illumination source C. \2\ Silver white is an acceptable color designation. \3\ Available from Munsell Color Company. 2441 Calvert Street, Baltimore. Maryland 21218. Table II--Color Specification Limits and Reference Standards, Types III and IV Sheeting -------------------------------------------------------------------------------------------------------------------------------------------------------- Chromaticity Coordinates \1\ (corner points) Reflectance ---------------------------------------------------------------- limits Color 1 2 3 4 (percent Y) Y Reference \3\ standard -------------------------------------------------------------------------------- (munsell papers) x y x y x y x y Min. Max. -------------------------------------------------------------------------------------------------------------------------------------------------------- White \2\................................. .303 287 .368 .353 .340 .380 .274 .316 27 ...... 5.0PB 7/1. Red....................................... .613 .297 .708 .292 .636 .364 .558 .352 2.5 11 7.5R 3/12. Orange.................................... .550 .360 .630 .370 .581 .418 .516 .394 14 30 2.5YR 5.5/14. Yellow.................................... .498 .412 .557 .442 .479 .520 .438 .472 15 40 1.25Y 6/12. Green..................................... .030 .380 .166 .346 .286 .428 .201 .776 3 8 10G 3/8 Blue...................................... .144 .030 .244 .202 .190 .247 .066 .208 1 10 5.8PB 1.32/6.8. -------------------------------------------------------------------------------------------------------------------------------------------------------- \1\ The four pairs of chromaticity coordinates determine the acceptable color in terms of the CIE 1931 standard colorimetric system measured with standard illumination source C. \2\ Silver white is an acceptable color designation. \3\ Available from Munsell Color Company, 2441 Calvert Street, Baltimore, Maryland 21218.