|
Links to other
Web sites with
information on
LOTO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
-
Clarification of the electric power generation, transmission, and
distribution standard. (1997, June 23). Energy control
procedures
29 CFR 1910.147(c)(4)(i); periodic inspection
(c)(6)(i).
-
Consultants performing
lockout/tagout periodic inspections. (1996, October 29). Performing
periodic inspections by an authorized employee
29 CFR 1910.147(c)(6)(i)(A).
-
Food Inspectors lockout/tagout procedures. (1996, October 2). Describes group
lockout/tagout
29 CFR 1910.147(f)(3).
-
Clarification concerning the Electric Power Generation, Transmission, and
Distribution standard. (1995, May 24). Provides clarification
of the Electric Power Generation standard
29 CFR 1910.269; tagout devices and their means of
attachment
29 CFR 1910.147(c)(5)(ii)(C)(2) and 1910.269(d)(3)(ii)(D); requirements for lockout and
tagout devices
(c)(5)(ii)(D) and 1910.269(d)(3)(ii)(E).
29 CFR 1910.147(c)(6)(i)(A).
-
Label Tagging Devices. (1994, August 12). Discusses energy
control procedure
29 CFR 1910.147(c)(4); work on cord and plug
(a)(2)(iii)(A); normal production operation
(a)(2)(ii) Exception; when service and maintenance work is covered during normal
production
(c)(4); specific procedures required for the control of hazardous energy
(c)(4)(ii);
and electrical safety-related work practices
1910.333(b)(2).
-
Applicability of the Machine Guarding and Lockout/Tagout standards to
printing presses.
OSHA Archived Standard Interpretation, (1993, June 14). Applies
29 CFR 1910.147; 29
CFR 1910.212; and
29 CFR 1910.219
in normal production operations of printing presses and discusses
29 CFR 1910.147(a)(2)(ii),
an exception.
-
Printing Presses: requirements for normal production and servicing
operations. (1992, September 16). Additional
clarification of this issue is contained in the June 14,1993
Regional Administrator's Memorandum.
-
Motor starter circuits and energy isolation devices. (1991, August 5).
Discusses relationship
of motor starter circuits and energy isolation devices (29
CFR 1910.399,
29 CFR 1910.305, 29
CFR 1910.147); definition of energy isolating device
(b).
-
Work permits in lockout/tagout standard requirements. (1991, April
10).
Documents energy control procedures
29 CFR 1910.147(c)(4).
|