![](https://webarchive.library.unt.edu/eot2008/20081105071136im_/http://ecfr.gpoaccess.gov/e/ecfr/images/spacer.gif) |
|
![](https://webarchive.library.unt.edu/eot2008/20081105071136im_/http://www.gpoaccess.gov/images/spacer.gif) |
Home Page > Executive Branch > Code of Federal Regulations > Electronic Code of Federal Regulations
![blue pill](https://webarchive.library.unt.edu/eot2008/20081105071136im_/http://ecfr.gpoaccess.gov/e/ecfr/images/logo--bluepill.gif)
e-CFR Data is current as of November 3, 2008
TITLE 49--Transportation
Subtitle B--OTHER REGULATIONS RELATING TO TRANSPORTATION
CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
PART 238--PASSENGER EQUIPMENT SAFETY STANDARDS
Subpart A--GENERAL
|
Responsibility for compliance. |
|
|
Movement of passenger equipment with power brake defects. |
|
|
Movement of passenger equipment with other than power brake defects. |
|
|
Reporting and tracking of repairs to defective passenger equipment. |
|
|
Special approval procedure. |
|
Subpart B--SAFETY PLANNING AND GENERAL REQUIREMENTS
|
Train electronic hardware and software safety. |
|
|
Inspection, testing, and maintenance plan. |
|
|
Training, qualification, and designation program. |
|
|
Pre-revenue service acceptance testing plan. |
|
|
Protection against personal injury. |
|
|
Rim-stamped straight-plate wheels. |
|
|
Figure 1C to Subpart B of Part 238
--Example of a Passenger Compartment Including a Vestibule Connected by an Open Passageway and Excluding a Vestibule Separated by an Interior Door-- 238.113 and 238.114 |
|
Subpart C--SPECIFIC REQUIREMENTS FOR TIER I PASSENGER EQUIPMENT
|
Scope/alternative compliance. |
|
|
Link between coupling mechanism and car body. |
|
|
Forward-facing end structure of locomotives. |
|
|
Truck-to-car-body attachment. |
|
|
Safety appliances--general. |
|
|
Safety appliances--new equipment. |
|
|
Interior fittings and surfaces. |
|
Subpart D--INSPECTION, TESTING, AND MAINTENANCE REQUIREMENTS FOR TIER I PASSENGER EQUIPMENT
|
Exterior calendar day mechanical inspection of passenger equipment. |
|
|
Interior calendar day mechanical inspection of passenger cars. |
|
|
Periodic mechanical inspection of passenger cars and unpowered vehicles used in passenger trains. |
|
|
Periodic brake equipment maintenance. |
|
Subpart E--SPECIFIC REQUIREMENTS FOR TIER II PASSENGER EQUIPMENT
|
Longitudinal static compressive strength. |
|
|
Forward end structures of power car cabs. |
|
|
Rear end structures of power car cabs. |
|
|
End structures of trailer cars. |
|
|
Truck-to-car-body and truck component attachment. |
|
|
Interior fittings and surfaces. |
|
|
Train operator's controls and power car cab layout. |
|
Subpart F--INSPECTION, TESTING, AND MAINTENANCE REQUIREMENTS FOR TIER II PASSENGER EQUIPMENT
|
Inspection, testing, and maintenance requirements. |
|
|
Program approval procedure. |
|
Subpart G--SPECIFIC SAFETY PLANNING REQUIREMENTS FOR TIER II PASSENGER EQUIPMENT
|
Safety planning requirements. |
|
|
Appendix B to Part 238
--Test Methods and Performance Criteria for the Flammability and Smoke Emission Characteristics of Materials Used in Passenger Cars and Locomotive Cabs |
|
February 27, 2007< !-- #EndDate -- >-->
|