NIOSH, Registry of Toxic Effects (RTECS) Identification Number:GB6650000
Department of Transportation Regulation Number (49 CFR 172.101) and Guide: 1755 154 (acid solution) [27 KB, PDF]; 1463 141 (acid, solid) [27 KB, PDF]
NIOSH Pocket Guide to Chemical Hazards, Chromic Acid & Chromates: chemical description, physical properties, potentially hazardous incompatibilities, and more
OSHA Permissible Exposure Limit (PEL) for General Industry:29 CFR 1910.1000 Z-1 Table -- 29 CFR 1910.1026 0.005 mg/m3 or 5 micrograms/m3 TWA; 0.0025 mg/m3 or 2.5 micrograms/m3 Action Level; 0.025 mg/m3 or 25 micrograms/m3 TWA (Painting of aerospace industry's aircraft or large aircraft parts).
NOTE: Applies to all occupational exposures to Chromium (VI) except application of pesticides regulated by the Environmental Protection Agency or another Federal government agency (e.g., the treatment of wood with preservatives); portland cement; or where the employer has objective data demonstrating that a material containing chromium or a specific process, operation, or activity involving chromium cannot release dusts, fumes, or mists of chromium (VI) in concentrations at or above 0.5 µg/m3 as a TWA under any expected conditions of use.
OSHA Permissible Exposure Limit (PEL) for Construction Industry:29 CFR 1926.55 Appendix A -- 29 CFR 1926.1126 0.005 mg/m3 or 5 micrograms/m3 TWA; 0.0025 mg/m3 or 2.5 micrograms/m3 Action Level.
NOTE: Applies to all occupational exposures to Chromium (VI) except application of pesticides regulated by the Environmental Protection Agency or another Federal government agency (e.g., the treatment of wood with preservatives); portland cement; or where the employer has objective data demonstrating that a material containing chromium or a specific process, operation, or activity involving chromium cannot release dusts, fumes, or mists of chromium (VI) in concentrations at or above 0.5 µg/m3 as a TWA under any expected conditions of use.
OSHA Permissible Exposure Limit (PEL) for Maritime:29 CFR 1915.1000 Table Z-Shipyards -- 29 CFR 1915.1026 0.005 mg/m3 or 5 micrograms/m3 TWA; 0.0025 mg/m3 or 2.5 micrograms/m3 Action Level.
NOTE: Applies to all occupational exposures to Chromium (VI) except application of pesticides regulated by the Environmental Protection Agency or another Federal government agency (e.g., the treatment of wood with preservatives); portland cement; or where the employer has objective data demonstrating that a material containing chromium or a specific process, operation, or activity involving chromium cannot release dusts, fumes, or mists of chromium (VI) in concentrations at or above 0.5 µg/m3 as a TWA under any expected conditions of use.
American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV): Metal and Cr(III) cmpds, as Cr, 0.5 mg/m3 TWA, Appendix A4 - Not Classifiable as a Human Carcinogen; Water-Soluble Cr(VI) cmpds, as Cr, 0.05 mg/m3 TWA, Appendix A1 - Confirmed Human Carcinogen, BEI; Insoluble Cr(VI) cmpds, as Cr, 0.01 mg/m3 TWA, Appendix A1 - Confirmed Human Carcinogen; Strontium Chromate, as Cr, 0.0005 mg/m3 TWA, Appendix A2 - Suspected Human Carcinogen
National Institute for Occupational Safety and Health (NIOSH) Recommended Exposure Limit (REL): 0.001 mg Cr(VI)/m3 10-hr TWA; Carcinogenic; Appendix A - NIOSH Potential Occupational Carcinogens; Appendix C - Supplementary Exposure Limits
OSHA's new Hexavalent Chromium Standard (29 CFR 1910.1026; 1915.1026; and 1926.1126) was published on 2/28/06.
Studies with cultured human lung cells demonstrate that hexavalent chromium can cause damage to DNA (clastogenicity).
Skin-patch testing of patients sensitive to chromium (VI) showed a minimum eczema elicitation threshold at 0.03 µg/cm2/48 hr (1 ppm) of chromium (VI) and at 0.18 µg/cm2/48 hr (6 ppm) of chromium (III).
EPA's oral reference dose (RfD, the daily oral exposure likely to be without an appreciable risk of deleterious effects during a lifetime) of chromium (VI) is 0.003 mg/kg/day. EPA's reference concentration (RfC) for particulate chromium (VI) is 0.0001 mg/m3.
EPA Air Toxics Website: Chromium Compounds. U.S. Environmental Protection Agency Technology Transfer Network.
No authors listed: Chromium Hexavalent Compounds. Report on Carcinogens, Eleventh Edition; U.S. Department of Health and Human Services, Public Health Service, National Toxicology Program, 2005. [152 KB, PDF]
De Raeve, H., Vandecasteele, C., Demedts, M. and Nemery, B.: Dermal and respiratory sensitization to chromate in a cement floorer. Am. J. Ind. Med.34(2): 169-176, 1998.
Hansen, M.B., Johansen, J.D. and Menne, T.: Chromium allergy: significance of both Cr(III) and Cr(VI). Contact Dermatitis49(4): 206-212, 2003.
Nuyts, G.D., et al.: New occupational risk factors for chronic renal failure. Lancet346(8966): 7-11, 1995.
Wise, S.S., et al.: Chromium is the proximate clastogenic species for lead chromate-induced clastogenicity in human bronchial cells. Mutat. Res.560(1): 79-89, 2004.
Three OSHA sampling and analytical methods for Cr (VI) are cited below:
Method ID-215 (version 2) is the most recent and focuses on air sampling,
Method W4001 focuses on wipe sampling, and
Method ID-215 is an older version of ID-215 (version 2) and contains some bulk and wipe sampling information.
Laboratory Sampling/Analytical Method:
sampling media: low ash 37-mm or 25-mm PVC filter in polystyrene cassette.
Do not use the preweighed custom-made cassettes with the aluminum cone that are intended for gravimetric sampling.
Chromium plating samples can be collected on either PVC filters or on quartz fiber filters coated with sodium hydroxide. The coated quartz fiber filters are preferred for sample stability.
CAUTION: Do not use the coated quartz fiber filters for any operation other than chromium plating.
analytical solvent: carbonate/bicarbonate buffer
maximum volume: 960 Liters maximum flow rate: 2 L/min (TWA)
minimum volume: 30 Liters maximum flow rate: 2 L/min (Ceiling)
current analytical method: Ion Chromatography; IC/UV
method reference: OSHA Analytical Method (OSHA ID-215 (version 2))
method classification: Fully Validated
note: Chromium plating samples collected on PVC filters must be shipped to SLTC within 24 hours of sampling by overnight delivery. These samples must be stabilized by laboratory personnel as described in Section 2 of OSHA ID-215 (version 2).
note: Welding samples must be shipped to SLTC within 24 hours of sampling by overnight delivery.
note: OSHA CSHOs can obtain quartz fiber filters coated with sodium hydroxide from SLTC.
Wipe Sampling Method:
sampling media: 37-mm PVC filter or 37-mm binderless quartz fiber filters
method reference: OSHA Analytical Method (OSHA W4001)
method classification: Fully Validated
note: Wipe samples taken in chromium plating and welding operations should be shipped to SLTC within 24 hours after sampling by overnight delivery. Chromium plating samples collected on PVC filters must be stabilized by laboratory personnel as described in Section 2 of W4001.
Bulk method:
sample collection: Solids require approximately 10 grams, liquids 10 mL; place in 20-mL glass vials with PTFE-lined caps.
method reference:: OSHA Analytical Method (OSHA ID-215, June 1998)
note: Collect samples wearing protective gloves, such as nitrile or PVC. Ship bulk samples to analytical laboratory separately from wipe or air samples. Ship by overnight delivery if that delivery service was used for the associated air samples.
All Trademarks are the property of their respective owners.
Accessibility Assistance: Contact the OSHA Directorate of Science, Technology and Medicine at 202-693-2300 for assistance accessing PDF materials.