OSHA NOTICE
DIRECTIVE NUMBER: 08-06 (CPL 02) |
EFFECTIVE DATE: 8/6/08 |
SUBJECT: Cancellation of CPL 02-02-019 (CPL 2-2.19) Quality Control Weighing Program |
Purpose: |
This notice cancels OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978.
|
Scope: |
OSHA-wide.
|
References: |
None.
|
Cancellations: |
CPL 02-02-019, Quality Control Weighing Program, 10/30/1978.
|
State Impact: |
This notice describes a Federal Program Change which does not require State adoption.
|
Action Offices: |
OSHA Regional Offices, Area Offices and Salt Lake Technical Center
|
Originating Office: |
Directorate of Science, Technology and Medicine
|
Contact: |
Salt Lake Technical Center
Directorate of Science, Technology and Medicine
8660 Sandy Parkway
Sandy, UT 84070 |
By and Under the Authority of
Edwin G. Foulke, Jr.
Assistant Secretary
Executive Summary
This notice cancels OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978.
Significant Changes
OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978, is cancelled. This instruction describes a weighing program that is obsolete.
- Purpose. This notice cancels OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978. The weighing program is obsolete and has been replaced by laboratory analysis at the Salt Lake Technical Center in accordance with OSHA Method PV2121 (Gravimetric Determination).
- Scope. This notice applies OSHA-wide.
- Cancellation. OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978.
- Significant Changes. OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978, is cancelled.
- References. None.
- Expiration Date. One year after the date of issuance.
- Action.
- Responsible Office. Salt Lake Technical Center
- Action Offices. Salt Lake Technical Center, Regional and Area Offices
- Information Offices. Compliance assistance, consultation
- Federal Program Change. This notice, which cancels an obsolete directive, describes a Federal program change for which State adoption is not required. State plans should assure that proper laboratory procedures are being used in their program.
|