Department of Labor Seal photos representing the workforce - digital imagery? copyright 2001 photodisc, inc.
Department of Labor Seal www.osha.gov [skip navigational links] Search    Advanced Search | A-Z Index
Directives
08-06 (CPL 02) - Cancellation of CPL 02-02-019 (CPL 2-2.19) Quality Control Weighing Program
Directives - Table of Contents Directives - Table of Contents
• Record Type: Notice
• Old Directive Number: 08-06 (CPL 02)
• Title: Cancellation of CPL 02-02-019 (CPL 2-2.19) Quality Control Weighing Program
• Information Date: 08/06/2008

OSHA NOTICE
DIRECTIVE NUMBER: 08-06 (CPL 02) EFFECTIVE DATE: 8/6/08
SUBJECT: Cancellation of CPL 02-02-019 (CPL 2-2.19) Quality Control Weighing Program


ABSTRACT

Purpose: This notice cancels OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978.

Scope: OSHA-wide.

References: None.

Cancellations: CPL 02-02-019, Quality Control Weighing Program, 10/30/1978.

State Impact: This notice describes a Federal Program Change which does not require State adoption.

Action Offices: OSHA Regional Offices, Area Offices and Salt Lake Technical Center

Originating Office: Directorate of Science, Technology and Medicine

Contact: Salt Lake Technical Center
Directorate of Science, Technology and Medicine
8660 Sandy Parkway
Sandy, UT 84070


By and Under the Authority of

Edwin G. Foulke, Jr.
Assistant Secretary





Executive Summary

This notice cancels OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978.

Significant Changes

OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978, is cancelled. This instruction describes a weighing program that is obsolete.





  1. Purpose. This notice cancels OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978. The weighing program is obsolete and has been replaced by laboratory analysis at the Salt Lake Technical Center in accordance with OSHA Method PV2121 (Gravimetric Determination).

  2. Scope. This notice applies OSHA-wide.

  3. Cancellation. OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978.

  4. Significant Changes. OSHA Instruction CPL 02-02-019, Quality Control Weighing Program, 10/30/1978, is cancelled.

  5. References. None.

  6. Expiration Date. One year after the date of issuance.

  7. Action.

    1. Responsible Office. Salt Lake Technical Center

    2. Action Offices. Salt Lake Technical Center, Regional and Area Offices

    3. Information Offices. Compliance assistance, consultation

  8. Federal Program Change. This notice, which cancels an obsolete directive, describes a Federal program change for which State adoption is not required. State plans should assure that proper laboratory procedures are being used in their program.

Directives - Table of Contents Directives - Table of Contents
Back to Top Back to Top www.osha.gov www.dol.gov
Contact Us | Freedom of Information Act | Customer Survey
Privacy and Security Statement | Disclaimers
Occupational Safety & Health Administration
200 Constitution Avenue, NW
Washington, DC 20210