[Code of Federal Regulations] [Title 40, Volume 22] [Revised as of July 1, 2004] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR180.101] [Page 343] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 180_TOLERANCES AND EXEMPTIONS FROM TOLERANCES FOR PESTICIDE CHEMICALS IN FOOD--Table of Contents Subpart C_Specific Tolerances Sec. 180.101 Specific tolerances; general provisions. Editorial Note: Nomenclature changes to subpart C appear at 67 FR 41803-41808, June 19, 2002; 67 FR 42393-42397, June 21, 2002; and 68 FR 39430-39435, July 1, 2003. (a) The tolerances established for pesticide chemicals in this subpart C apply to residues resulting from their application prior to harvest or slaughter, unless otherwise stated. Tolerances are expressed in terms of parts by weight of the pesticide chemical per one million parts by weight of the raw agricultural commodity. (b) The poisonous and deleterious substances for which tolerances are established by the regulations in this subpart C are named by their common names wherever practicable, otherwise by their chemical names. (c) The analytical methods to be used for determining whether pesticide residues, including negligible residues, in or on raw agricultural commodities are in compliance with the tolerances established in this part 180 are identified among the methods contained or referenced in the Food and Drug Administration's ``Pesticide Analytical Manual'' which is available from the Food and Drug Administration, Department of Health, Education, and Welfare, 200 C Street SW., Washington, DC 20204.