Quick-2 was primarily developed to accompany the FEMA technical guidance manual titled, Managing Floodplain Development in Approximate Zone A Areas. The purpose of this manual is to provide guidance for obtaining and developing Base (100-year) Flood Elevations (BFEs) where Special Flood Hazard Areas (SFHAs) on a community's Flood Hazard Boundary Map (FHBM) or Flood Insurance Rate Map (FIRM) have been identified and designated as Zone A. This manual is intended to assist local community officials who are responsible for administering and enforcing the floodplain management requirements of the National Flood Insurance Program (NFIP). Quick-2 is also useful for community engineers, architectural/engineering firms, developers, and others at the local level who may be required to develop BFEs.
The Quick-2 program is provided in three sets of .Zip archives below. The first archive includes Quick-2 program files compiled for 32-bit Windows 98/NT systems. The second archive includes program files compiled for 32-bit Windows 95 systems. The third archive includes program files for 16-bit Windows 3.x systems.
Click on the "More Info" icon if you need additional information about how to obtain WinZip.
Download Complete Quick-2, Version 2.0 (32-bit Win 95)
(4.08 MB .Zip file)
If desired, the program can also be downloaded onto three double-sided, high-density diskettes (1.44 MB capacity).
Disk 1 (1.37 MB .Zip file)
Disk 2 (1.37 MB .Zip file)
Disk 3 (1.34 MB .Zip file)
Open the .Zip archive(s), highlight the file(s), and extract it (them) to a local directory on your computer's hard drive.
(NOTE: Quick-2, Versions 1.0 and 2.0, may be run from the same computer, provided that the Microsoft DOS and Windows versions are installed in different directories. If you currently have Version 1.0 installed, be sure not to copy the Version 2.0 program files to the same location as the Version 1.0 files on your hard disk.)
Click on "Setup.exe" to run the program file.
Follow the on-screen directions to install the program. The default directory is C:\Program Files\Quick-2\ for the Windows 98/NT 32-bit version, C:\Program Files\Quick2\ for the Windows 95 32-bit version, and C:\QUICK2 for the Windows 3.x 16-bit application.
Click Start and then point to Programs. Locate the Quick-2 program folder and select the program name to start Quick-2, Version 2.0 (Windows 3.x). Locate the Quick-2 program group and select the program name to start Quick-2, Version 2.0 (Windows 95/98/NT).
You are now ready to run Quick-2, Version 2.0.
View the Quick-2 Bulletin Archive
View the Online Tutorials main pageLast Modified: Friday, 31-Mar-2006 16:07:49 EST