| |
Nationally Supported Engineering Tools (Software)
Below you will find several resources to help you put conservation on the land. See
"Disclaimer" below.
Engineering Tools (Software and training) |
NRCS Employees |
Non-NRCS* |
Software |
Manual |
WinPond 2006, Version 1.5 is a computer program used for the design of small farm ponds and other runoff
impoundments. |
HTML |
HTML |
PDF |
SET Phase I is a computer program used for field office use. SET is an easy-to-use tool that
provides the basic functions to develop, display, and print contour maps from field office survey data. SET works similarly to Computer Aided Drafting and
Design (CADD) programs but contains only basic features to create and modify survey maps. |
HTML |
N/A |
N/A |
EFT: SET Training Video.
This 40-minute video provides training on how to
use the Engineering Field Tools (EFT) and the Survey Engineering
Tool (SET) module. This video helps new users and those who have limited
experience using EFT or SET. The video walks the viewer through the basic
functions of the software. Narrator: Kip Yasumiishi, Agricultural
Engineer, NRCS, West Ntional Technology Support Center. |
HTML
(streaming wmv file) |
N/A |
N/A |
AutoCAD 3D Map 2006 |
HTML |
N/A |
N/A |
AutoCAD 3D
Map 2007 |
HTML |
N/A |
N/A |
Civil 3D CADD 2007 |
HTML |
N/A |
N/A |
Waterway – Under Development |
|
|
|
Terrace –
Under Development |
|
|
|
*NRCS Partners, Consultants, Technical Service Providers (TSP),
Universities, Private Citizens, etc.
If you have any questions, please contact the Conservation Engineering Division at (202) 720-0250.
Disclaimer - As with any engineering software, use of these programs, or the information on this site, is
not a replacement for a professional engineering evaluation of the situation. This on-line software is meant for conservation practice planning and design and
is in no way a replacement for a thorough engineering review. A professional engineer, licensed in the appropriate field of engineering, should always
conduct the final evaluation of the application; and that individual, not NRCS or its employees and representatives, is responsible for the final engineering
design and performance of the application at hand. This software is supplied "as is," and NRCS specifically excludes warranties, expressed or implied, as to
the accuracy of the data generated by the use of this program and does not assume liability for any losses or damage resulting form the use of this program
or the information supplied with it. NRCS does not warrant, guarantee, or make any representations regarding the use, or the results of use, of this software
or accompanying information in terms of its accuracy, validity, completeness, applicability, or compliance with any regulatory code or
governmental laws and regulations. Use of this software and information involves some risks, and the entire risk as to the results and performance of the
software and accompanying information is the user's responsibility and liability. | |
|