[Code of Federal Regulations]

[Title 30, Volume 1]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 30CFR28.2]



[Page 157]

 

                       TITLE 30--MINERAL RESOURCES

 

  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR

 

PART 28_FUSES FOR USE WITH DIRECT CURRENT IN PROVIDING SHORT-CIRCUIT 

PROTECTION FOR TRAILING CABLES IN COAL MINES--Table of Contents

 

                      Subpart A_General Provisions

 

Sec.  28.2  Approved fuses.



    (a) On and after the effective date of this part, fuses shall be 

considered to be approved for use with direct current in providing 

short-circuit protection for trailing cables in coal mines only where 

such fuses are: (1) The same in all respects as those fuses which have 

been approved after meeting the minimum requirements for performance and 

short-circuit protection prescribed in this Part 28; and (2) maintained 

in an approved condition.