[Code of Federal Regulations] [Title 30, Volume 1] [Revised as of July 1, 2006] From the U.S. Government Printing Office via GPO Access [CITE: 30CFR35.1] [Page 169] TITLE 30--MINERAL RESOURCES CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR PART 35_FIRE-RESISTANT HYDRAULIC FLUIDS--Table of Contents Subpart A_General Provisions Sec. 35.1 Purpose. Subpart A_General Provisions Sec. 35.1 Purpose. 35.2 Definitions. 35.3 Consultation. 35.4 Types of hydraulic fluid for which certificates of approval may be granted. 35.5 [Reserved] 35.6 Application procedures and requirements. 35.7 Date for conducting tests. 35.8 Conduct of investigations, tests, and demonstrations. 35.9 Certificates of approval. 35.10 Approval labels or markings. 35.11 Material required for record. 35.12 Changes after certification. 35.13 Withdrawal of certification. Subpart B_Test Requirements 35.20 Autogenous-ignition temperature test. 35.21 Temperature-pressure spray-ignition test. 35.22 Test to determine effect of evaporation on flammability. 35.23 Performance required for certification. Authority: 30 U.S.C. 957, 961. Source: Schedule 30, 24 FR 10201, Dec. 17, 1959, unless otherwise noted. The regulations in this part set forth the requirements for fire- resistant hydraulic fluids and concentrates for the production thereof to procure their certification as approved for use in machines and devices that are operated in coal mines and procedures for applying for such certification. [Schedule 30, 24 FR 10201, Dec. 17, 1959, as amended at 52 FR 17515, May 8, 1987]