[Code of Federal Regulations]

[Title 30, Volume 1]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 30CFR36.11]



[Page 180]

 

                       TITLE 30--MINERAL RESOURCES

 

  CHAPTER I--MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR

 

PART 36_APPROVAL REQUIREMENTS FOR PERMISSIBLE MOBILE DIESEL-POWERED 

TRANSPORTATION EQUIPMENT--Table of Contents

 

                      Subpart A_General Provisions

 

Sec.  36.11  Approval plates.



    (a) A certificate of approval will be accompanied by a photograph of 

an approval plate, bearing the emblem of the Mine Safety and Health 

Administration and spaces for the approval number, the type, the serial 

number, and ventilation requirement; the name of the complete assembly; 

and the name of the applicant.

    (b) The applicant shall reproduce the design as a separate plate, 

which shall be attached, in a suitable place, on each complete assembly 

to which it relates. The size, type, and method of attaching and 

location of an approval plate are subject to MSHA's approval. The method 

of affixing the approval plate shall not impair the permissibility 

(explosion-proof) features of the complete assembly of mobile diesel-

powered transportation equipment.

    (c) The approval plate identifies the equipment, to which it is 

attached, as permissible and is the applicant's guarantee that the 

equipment complies with the requirements of this part. Without an 

approval plate no equipment is considered permissible under the 

provisions of this part.

    (d) Use of the approval plate obligates the applicant to whom the 

certificate of approval was granted to maintain in his plant the quality 

of each complete assembly bearing it and guarantees that it is 

manufactured and assembled according to the drawings, specifications, 

and descriptions upon which a certificate of approval was based.



[Sched. 31, 26 FR 645, Jan. 24, 1961, as amended at 43 FR 12318, Mar. 

24, 1978]