[Federal Register: September 3, 2008 (Volume 73, Number 171)]
[Notices]
[Page 51444-51445]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr03se08-32]
[[Page 51444]]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
National Institute of Standards and Technology
Announcement of a Public Meeting on U.S. Technical Participation
in the 13th Quadrennial Conference of the International Organization of
Legal Metrology (OIML)
AGENCY: National Institute of Standards and Technology, Commerce.
ACTION: Meeting announcement and request for comments.
-----------------------------------------------------------------------
SUMMARY: The National Institute of Standards and Technology (NIST) will
hold a public meeting to discuss U.S. technical participation in the
13th Quadrennial Conference of the International Organization of Legal
Metrology (OIML). This pre-conference public meeting is open to all
interested parties.
The principal focus of the public meeting will be the 26 OIML
Recommendations on legal measuring instruments that will be presented
for ratification by the Conference. These Recommendations and OIML-
member nations' technical comments on them will be reviewed with
interested parties who will be given an opportunity to present their
views on the Recommendations and other relevant issues related to the
Conference.
Participants with an expressed interest in particular topics may
obtain copies of the OIML Conference technical agenda, including copies
of the Recommendations to be ratified, from the OIML International
Conference Web site at http://www.oiml.org/events/sydney, at the OIML
Web site at http://www.oiml.org, or from the NIST International Legal
Metrology Group.
Interested parties wishing to schedule an oral presentation at the
pre-conference meeting should provide a written summary of comments to
the NIST International Legal Metrology Group no later than 2 October
2008. Written comments from parties unable to attend the pre-conference
public meeting are also welcome.
DATES: Pre-conference meeting at the National Institute of Standards
and Technology: Thursday, 9 October 2008 from 10 a.m. to 12 noon;
Thirteenth OIML International Conference of Legal Metrology in Sydney,
Australia, 29-31 October 2008.
ADDRESSES: Pre-conference meeting: National Institute of Standards and
Technology, Administration Building, Lecture Room D, 100 Bureau Drive,
Gaithersburg, MD 20899; International Conference: Star City Hotel,
Sydney, Australia.
FOR FURTHER INFORMATION CONTACT: Mr. Ralph Richter, International Legal
Metrology Group, Weights and Measures Division, National Institute of
Standards and Technology, Gaithersburg, MD 20899-2600; telephone: 301-
975-3997; fax: 301-926-8091; e-mail: ralph.richter@nist.gov.
SUPPLEMENTARY INFORMATION: The International Organization of Legal
Metrology (OIML) is an intergovernmental treaty organization in which
the United States and 58 other nations are members. Its principal
purpose is to harmonize national laws and regulations pertaining to
testing and verifying the performance of legal measuring instruments
used for equity in commerce, for public and worker health and safety,
and for monitoring and protecting the environment. The harmonized
results promote the international trade of measuring instruments and
products affected by measurement.
Twenty-six Recommendations will be presented for ratification by
the Conference in the following two categories; Category 1: those
already approved by the International Committee of Legal Metrology
(CIML) between 2004 and 2007 and Category 2: those that are expected to
be submitted directly to the Conference for ratification. These
Recommendations and the OIML-member nations holding the responsible
secretariat for their development are listed below:
Category 1
R21 ``Taximeters. Metrological and technical requirements, test
procedures and test report format.'' (revision) (United Kingdom);
R35-1 ``Material measures of length for general use. Part 1:
Metrological and technical requirements.'' (revision) (United Kingdom);
R39 ``Rockwell hardness machines.'' (revision) (United States);
R49-1 and R49-2 ``Water meters intended for the metering of cold
potable water and hot water. Part 1: Metrological and technical
requirements and Part 2: Test methods.'' (revision) (United Kingdom);
R51-1 ``Automatic catchweighing instruments. Part 1: Metrological and
technical requirements--Tests.'' (revision) (United Kingdom);
R65 ``Force measuring system of uniaxial material testing machines.''
(revision) (United States);
R76-1 ``Non-automatic weighing instruments. Part 1: Metrological and
technical requirements--Tests.'' (revision) (France and Germany);
R82 ``Gas chromatographic systems for measuring the pollution from
pesticides and other toxic substances.'' (revision) (United States);
R83 ``Gas chromatograph/mass spectrometer systems for the analysis of
organic pollutants in water.'' (revision) (United States);
R99 ``Amendment: Instruments for measuring vehicle exhaust emissions
(joint publication ISO3930/OIML R 99).'' (revision) (Netherlands);
R107-1 ``Discontinuous totalizing automatic weighing instruments
(totalizing hopper weighers). Part 1: Metrological and technical
requirements--Tests.'' (revision) (United Kingdom);
R116 ``Inductively coupled plasma atomic emission spectrometers for the
measurement of metal pollutants in water.'' (revision) (United States);
R117-1 ``Dynamic measuring systems for liquids other than water. Part
1: Metrological and technical requirements.'' (revision) (United States
and Germany);
R134-1 ``Automatic instruments for weighing road vehicles in motion
and axle-load measuring. Part 1: Metrological and technical
requirements--Tests.'' (new document) (United Kingdom);
R137-1 ``Gas Meters. Part 1: Requirements.'' (new document)
(Netherlands);
R138 ``Vessels for commercial transactions.'' (new document)
(Switzerland);
R139 ``Compressed gaseous fuel measuring systems for vehicles.'' (new
document) (Netherlands);
R140 ``Measuring systems for gaseous fuel.'' (new document)
(Netherlands);
B-3/Amend ``OIML Certificate System for Measuring Instruments--
Amendment.'' (new document) (OIML);
B10-1/Amend ``Framework for a Mutual Acceptance Arrangement on OIML
Type Evaluations (MAA)--Amendment.'' (new document) (OIML).
Category 2
R56 ``Standard solutions reproducing the conductivity of electrolytes''
(revision) (Russian Federation);
R71 ``Fixed storage tanks. General requirements'' (revision) (Austria
and Germany);
R85 ``Automatic level gauges for measuring the level of liquid in fixed
storage tanks.'' (revision) (Austria and Germany);
[[Page 51445]]
Procedure for calibration and verification of the main characteristics
of thermographic instruments (new document) (Russian Federation);
Automatic refractometers: Methods and means of verification (new
document) (Russian Federation).
Dated: August 22, 2008.
James M. Turner,
Deputy Director.
[FR Doc. E8-20147 Filed 9-2-08; 8:45 am]
BILLING CODE 3510-13-P