[Federal Register: August 20, 2008 (Volume 73, Number 162)]
[Notices]
[Page 49189-49194]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr20au08-52]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2008-0628; FRL-8379-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from July 28, 2008 through August 1, 2008, consists of the PMNs
and TME, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before September 19, 2008.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2008-0628, by one of the following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2008-0628. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
[[Page 49190]]
2008-0628. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at http://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
http://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at http://
www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from July 28, 2008 through August 1,
2008, consists of the PMNs and TME, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TME, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number
[[Page 49191]]
assigned to the PMN; the date the PMN was received by EPA; the
projected end date for EPA's review of the PMN; the submitting
manufacturer; the potential uses identified by the manufacturer in the
PMN; and the chemical identity.
I. 65 Premanufacture Notices Received From: 07/28/08 to 08/01/08
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-08-0547 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether
non-dispersive use urethane block
copolymer compound
with unsaturated
fatty acids
P-08-0548 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified
polyurethane
P-08-0549 07/21/08 10/18/08 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified
polydimethylsiloxane
P-08-0550 07/21/08 10/18/08 Honeywell Specialty (G) Foam additive (S) 1-propene,
Materials 1,3,3,3-tetrafluoro-
, (1E)-
P-08-0551 07/21/08 10/18/08 Honeywell Specialty (S) Chemical (S) 1-propene,
Materials intermediate (as CIS- 1,3,3,3-tetrafluoro-
isomer) , (1Z)-
P-08-0552 07/21/08 10/18/08 CBI (G) Industrial wood (G) Multifunctional
coating acrylate
P-08-0553 07/21/08 10/18/08 CBI (G) industrial wood (G) Polycarbonate
applications polyurethane
acrylate oligomer
P-08-0554 07/22/08 10/19/08 CBI (G) Aqueous (G) Aqueous
polyurethane rubber polyurethane
coating resin for dispersion
open, non-dispersive
use
P-08-0555 07/24/08 10/21/08 CBI (G) Polymer used in (G) Polymer of
electronics aromatic
manufacture dianhydride,
aromatic diamine and
polysiloxanediamine.
P-08-0556 07/28/08 10/25/08 CBI (G) Open non- (G) Aromatic
dispersive prepolymer based on
TDI
P-08-0557 07/25/08 10/22/08 Cytec Industries Inc. (G) Coatings resin (G) Acrylated
aliphatic
polyurethane
P-08-0558 07/28/08 10/25/08 CBI (S) Polyurethane (G) Polyurethane
acrylate used in the acrylate
manufacture of ultra
violet curable
coatings
P-08-0559 07/28/08 10/25/08 CBI (G) Chemical (G) Aliphatic
intermediate ketoxime
P-08-0560 07/29/08 10/26/08 DIC International, (G) Additive for (G) Modified
LLC. lubricants polyalkyldiene
polymer
P-08-0561 07/29/08 10/26/08 CBI (S) Ingredient in (G) Cycloaklyl
fragrance compound piperonyl ether
P-08-0562 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil,
maleated, oxidized,
sodium salts
P-08-0563 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil,
maleated, oxidized,
potassium salts
P-08-0564 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil,
maleated, oxidized,
calcium salts
P-08-0565 07/29/08 10/26/08 CBI (G) Mining aid (S) Tall oil,
maleated, oxidized,
ammonium salts
P-08-0566 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, maleated,
oxidized, sodium
salts
P-08-0567 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, maleated,
oxidized, potassium
salts
P-08-0568 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, maleated,
oxidized, calcium
salts
P-08-0569 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, maleated,
oxidized, ammonium
salts
P-08-0570 07/29/08 10/26/08 CBI (G) Mining aid (S) Fatty acids, tall
oil, polymd.,
oxidized, sodium
salts
P-08-0571 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and acrylate
P-08-0572 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, ammonium
salt
P-08-0573 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, sodium
salt
P-08-0574 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, potassium
salt
P-08-0575 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, compound
with amino alcohol
P-08-0576 07/31/08 10/28/08 CBI (G) Ink binder (G) Acrylate, polymer
with acrylate,
ketoacrylamide,
styrene and
acrylate, compound
with amino alcohol
[[Page 49192]]
P-08-0577 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0578 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0579 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0580 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0581 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating,ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0582 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate and
epoxy diacrylate
with .beta.-
diketone.
P-08-0583 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0584 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0585 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0586 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0587 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0588 07/31/08 10/28/08 CBI (G) Adhesive, (G) Polyacrylate
coating, ink oligomer product
from base-catalyzed
reaction of
triacrylate,
diacrylate, .beta.-
ketoester and
dialkylmine.
P-08-0589 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0590 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0591 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0592 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0593 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
[[Page 49193]]
P-08-0594 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester
P-08-0595 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0596 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0597 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0598 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0599 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0600 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-diketone.
P-08-0601 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0602 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0603 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0604 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0605 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0606 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Polyacrylate
adhesive oligomer product
from base-catalyzed
reaction of
tetraacrylate,
triacrylate, epoxy
diacrylate and
.beta.-ketoester.
P-08-0607 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic
adhesive urethane diacrylate
monomer from
diisocyanate and
monoepoxide acrylate
ester.
P-08-0608 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic
adhesive urethane diacrylate
monomer from
diisocyanate and
monoepoxide acrylate
ester
P-08-0609 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic
adhesive urethane diacrylate
monomer from
diisocyanate and
monoepoxide acrylate
ester
P-08-0610 08/01/08 10/29/08 CBI (G) Ink, coating, (G) Aliphatic
adhesive urethane diacrylate
monomer from
diisocyanate and
monoepoxide acrylate
ester
P-08-0611 08/01/08 10/29/08 CBI (G) Rubber additive (G) Isocyanate
polymer
--------------------------------------------------------------------------------------------------------------------------------------------------------
[[Page 49194]]
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 1 Test Marketing Exemption Notices Received From: 07/28/08 to 08/01/08
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-08-0017 07/25/08 09/07/08 Cytec Industries Inc. (G) Coatings resin (G) Acrylated
aliphatic
polyurethane
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 18 Notices of Commencement From: 07/28/08 to 08/1/08
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-06-0423 07/31/08 07/18/08 (G) 2-Propenoic acid, 2-
methyl-, 1,2-ethanediyl
ester, telomer with alkyl
2-
[[(alkylthio)thioxomethyl
]thio]-2-methylalkanoate,
alkyl methacrylate and me
methacrylate, tert-bu 2-
ethylhexaneperoxoate-
initiated
P-07-0639 07/30/08 07/18/08 (G) Ether carboxylic acid
amide
P-07-0662 07/18/08 06/30/08 (G) Substituted alkenyl-
terminated siloxanes and
silicones polymers with
substituted acrylates,
peroxide initiated
P-08-0105 07/22/08 06/29/08 (G) Azo compound
P-08-0114 07/29/08 06/25/08 (G) Alkanoic acid, ethenyl
ester, polymer with
ethenyl acetate and alkyl
2-propenoate
P-08-0121 08/01/08 07/10/08 (G) Acryloylisocyanate
P-08-0124 07/30/08 07/18/08 (G) Quaternary ammonium
compound
P-08-0209 07/28/08 07/23/08 (G) Poly(oxy-1,2-
ethanediyl), .alpha.-bis
alkyl substituted
hydroxyphenyl ester-
.omega.-bis alkyl
substituted hydroxyphenyl
ester
P-08-0265 08/01/08 07/08/08 (G) Polymer of isocyanic
acid, polymethylene
polyphenylene ester, with
alkyl polyamine, .alpha.-
hydro-.gamma.-
hydroxypoly[(oxy(methyl-
1,2-ethanediyl)) and
methyloxirane
P-08-0275 07/18/08 07/07/08 (S) Cesium tungsten oxide
P-08-0310 07/24/08 07/19/08 (G) Heteromonocycle
carboxylic acid, (3-
chloro-2-pyridinyl)-oxo-,
ethyl ester
P-08-0327 07/23/08 07/14/08 (G) Halogenated aromatic
ester derivatives
P-08-0333 07/25/08 06/28/08 (G) Fatty acids, C18-
unsaturated, dimers,
polymer with alkyldioic
acids, ethylenediamine,
dialkylcyclicdiamine, and
tall-oil fatty acid
P-08-0335 07/25/08 06/28/08 (G) Fatty acids, C18-
unsaturated, dimers,
polymer with alkyldioic
acid, ethylenediamine,
dialkyloxydiamine, and
tall-oil fatty acid
P-08-0344 07/18/08 07/10/08 (S) 1,3-dioxepin, 4,7-
dihydro-2-(1,1,4-
trimethyl-3-pentenyl yl)-
P-08-0352 07/28/08 07/17/08 (G) Alkyl acrylate polymer
with inorganic acid and
alkoxyethyl acrylate,
alkyl ester
P-08-0384 07/31/08 07/21/08 (G) Vegetable oils, esters
with polyols
P-95-0231 07/28/08 02/23/00 (G) Polyester resin
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: Augut 13, 2008.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E8-19304 Filed 8-19-08; 8:45 am]
BILLING CODE 6560-50-S