[Federal Register: January 6, 2005 (Volume 70, Number 4)]
[Notices]
[Page 1248-1252]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr06ja05-48]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
OPP-2004-0294; FRL-7694-7]
Pesticide Products; Registration Applications
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: This notice announces receipt of applications to register
pesticide products containing new active ingredients not included in
any previously registered products pursuant to the provisions of
section 3(c)(4) of the Federal Insecticide, Fungicide, and Rodenticide
Act (FIFRA), as amended.
DATES: Written comments, identified by the docket ID number OPP-2004-
0294, must be received on or before February 7, 2005.
ADDRESSES: Comments may be submitted electronically, by mail, or
through hand delivery/courier. Follow the detailed instructions as
provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: The Product Manager (PM),
Antimicrobials Division (7510C), listed in the table below:
[[Page 1249]]
----------------------------------------------------------------------------------------------------------------
Telephone number/e-mail
Product Manager address Mailing address File symbol
----------------------------------------------------------------------------------------------------------------
Velma Noble (PM 31) (703) 308-6233; Antimicrobials Division 75680-R
noble.velma@epa.gov. (7510C), Office of 3090-EEN
Pesticides, 6836-EIG
Environmental Protection 6836-EIU
Agency, 1200 5185-UOO;
Pennsylvania Ave., NW., 74234-R
Washington, DC 20460-
0001
----------------------------------------
Marshall Swindell (PM 33) (703) 308-6341; Do. 1258-REUT
swindell.marshall@epa.go 39967-UO
v 2693-ERU
2693-ERL
2214-RT
49403-GN
49403-EO
43813-ET
----------------------------------------
Adam Heyward (PM 34) (703) 308-6422; Do. 75269-E (MUP);
heyward.adam@epa.gov 75799-R (MUP)
75799-E (EP)
43813-GG (MUP)
43813-GU (EP)
43813-GL (EP)
----------------------------------------------------------------------------------------------------------------
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
You may be potentially affected by this action if you manufacture
antimicrobial pesticides. The following use patterns are included in
this notice: Wood preservatives, preservatives for paints, adhesives,
coatings, material preservative for treated articles, manufacturing use
products (MUPs) for making antifouling paint products, antifouling boat
bottom paint, residential mold and mildew control, medical waste
treatment, and cooling towers. Potentially affected entities may
include, but are not limited to:
Food manufacturing (NAICS 311)
Pesticide manufacturing (NAICS 32532).
This listing is not intended to be exhaustive, but rather provides
a guide for readers regarding entities likely to be affected by this
action. Other types of entities not listed in the table could also be
affected. The North American Industrial Classification System (NAICS)
codes have been provided to assist you and others in determining
whether this action might apply to certain entities. If you have any
questions regarding the applicability of this action to a particular
entity, consult the person listed under FOR FURTHER INFORMATION
CONTACT.
B. How Can I Get Copies of this Document and Other Related Information?
1. Docket. EPA has established an official public docket for this
action under docket identification (ID) number OPP-2004-0294. The
official public docket consists of the documents specifically
referenced in this action, any public comments received, and other
information related to this action. Although a part of the official
docket, the public docket does not include Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute. The official public docket is the collection of materials
that is available for public viewing at the Public Information and
Records Integrity Branch (PIRIB), Rm. 119, Crystal Mall 2,
1801 S. Bell Street, Arlington, VA 22202. This docket facility is open
from 8:30 a.m. to 4 p.m., Monday through Friday, excluding legal
holidays. The docket telephone number is (703) 305-5805.
2. Electronic access. You may access this Federal Register document
electronically through the EPA Internet under the ``Federal Register''
listings at http://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through
EPA's electronic public docket and comment system, EPA Dockets. You may
use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official
public docket, and to access those documents in the public docket that
are available electronically. Once in the system, select ``search,''
then key in the appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets.
Information claimed as CBI and other information whose disclosure is
restricted by statute, which is not included in the official public
docket, will not be available for public viewing in EPA's electronic
public docket. EPA's policy is that copyrighted material will not be
placed in EPA's electronic public docket but will be available only in
printed, paper form in the official public docket. To the extent
feasible, publicly available docket materials will be made available in
EPA's electronic public docket. When a document is selected from the
index list in EPA Dockets, the system will identify whether the
document is available for viewing in EPA's electronic public docket.
Although not all docket materials may be available electronically, you
may still access any of the publicly available docket materials through
the docket facility identified in Unit I.B.1. EPA intends to work
towards providing electronic access to all of the publicly available
docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is
that public comments, whether submitted electronically or in paper,
will be made available for public viewing in EPA's electronic public
docket as EPA receives them and without change, unless the comment
contains copyrighted material, CBI, or other information whose
disclosure is restricted by statute. When EPA identifies a comment
containing copyrighted material, EPA will provide a reference to that
material in the version of the comment that is placed in EPA's
electronic public docket. The entire printed comment, including the
copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or
delivered to the docket will be
[[Page 1250]]
transferred to EPA's electronic public docket. Public comments that are
mailed or delivered to the Docket will be scanned and placed in EPA's
electronic public docket. Where practical, physical objects will be
photographed, and the photograph will be placed in EPA's electronic
public docket along with a brief description written by the docket
staff.
C. How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand
delivery/courier. To ensure proper receipt by EPA, identify the
appropriate docket ID number in the subject line on the first page of
your comment. Please ensure that your comments are submitted within the
specified comment period. Comments received after the close of the
comment period will be marked ``late.'' EPA is not required to consider
these late comments. If you wish to submit CBI or information that is
otherwise protected by statute, please follow the instructions in Unit
I.D. Do not use EPA Dockets or e-mail to submit CBI or information
protected by statute.
1. Electronically. If you submit an electronic comment as
prescribed in this unit, EPA recommends that you include your name,
mailing address, and an e-mail address or other contact information in
the body of your comment. Also include this contact information on the
outside of any disk or CD ROM you submit, and in any cover letter
accompanying the disk or CD ROM. This ensures that you can be
identified as the submitter of the comment and allows EPA to contact
you in case EPA cannot read your comment due to technical difficulties
or needs further information on the substance of your comment. EPA's
policy is that EPA will not edit your comment, and any identifying or
contact information provided in the body of a comment will be included
as part of the comment that is placed in the official public docket,
and made available in EPA's electronic public docket. If EPA cannot
read your comment due to technical difficulties and cannot contact you
for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to
submit comments to EPA electronically is EPA's preferred method for
receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/
, and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number
OPP-2004-0294. The system is an ``anonymous access'' system, which
means EPA will not know your identity, e-mail address, or other contact
information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to opp-docket@epa.gov,
Attention: Docket ID Number OPP-2004-0294. In contrast to EPA's
electronic public docket, EPA's e-mail system is not an ``anonymous
access'' system. If you send an e-mail comment directly to the docket
without going through EPA's electronic public docket, EPA's e-mail
system automatically captures your e-mail address. E-mail addresses
that are automatically captured by EPA's e-mail system are included as
part of the comment that is placed in the official public docket, and
made available in EPA's electronic public docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM
that you mail to the mailing address identified in Unit I.C.2. These
electronic submissions will be accepted in WordPerfect or ASCII file
format. Avoid the use of special characters and any form of encryption.
2. By mail. Send your comments to: Public Information and Records
Integrity Branch (PIRIB), Office of Pesticide Programs (OPP),
Environmental Protection Agency (7502C), 1200 Pennsylvania Ave., NW.,
Washington, DC 20460-0001, Attention: Docket ID Number OPP-2004-0294.
3. By hand delivery or courier. Deliver your comments to: Public
Information and Records Integrity Branch (PIRIB), Office of Pesticide
Programs (OPP), Environmental Protection Agency, Rm. 119, Crystal Mall
2, 1801 S. Bell S., Arlington, VA 22202, Attention: Docket ID
Number OPP-2004-0294. Such deliveries are only accepted during the
docket's normal hours of operation as identified in Unit I.B.1.
D. How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI
electronically through EPA's electronic public docket or by e-mail. You
may claim information that you submit to EPA as CBI by marking any part
or all of that information as CBI (if you submit CBI on disk or CD ROM,
mark the outside of the disk or CD ROM as CBI and then identify
electronically within the disk or CD ROM the specific information that
is CBI). Information so marked will not be disclosed except in
accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes
any information claimed as CBI, a copy of the comment that does not
contain the information claimed as CBI must be submitted for inclusion
in the public docket and EPA's electronic public docket. If you submit
the copy that does not contain CBI on disk or CD ROM, mark the outside
of the disk or CD ROM clearly that it does not contain CBI. Information
not marked as CBI will be included in the public docket and EPA's
electronic public docket without prior notice. If you have any
questions about CBI or the procedures for claiming CBI, please consult
the person listed under FOR FURTHER INFORMATION CONTACT.
E. What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your
comments:
1. Explain your views as clearly as possible.
2. Describe any assumptions that you used.
3. Provide copies of any technical information and/or data you used
that support your views.
4. If you estimate potential burden or costs, explain how you
arrived at the estimate that you provide.
5. Provide specific examples to illustrate your concerns.
6. Offer alternative ways to improve the registration activity.
7. Make sure to submit your comments by the deadline in this
notice.
8. To ensure proper receipt by EPA, be sure to identify the docket
ID number assigned to this action in the subject line on the first page
of your response. You may also provide the name, date, and Federal
Register citation.
II. Registration Applications
EPA received applications as follows to register pesticide products
containing active ingredients not included in any previously registered
products pursuant to the provision of section 3(c)(4) of FIFRA. Notice
of receipt of these applications does not imply a decision by the
Agency on the applications.
Products Containing Active Ingredients Not Included in any Previously
Registered Products
1. File symbol: 75680-R. Applicant: Rutherford Chemicals. Contact:
The Acta Group 1203 Nineteenth St., NW., Suite 300, Washington, DC
20036-2401. Product Name: Rutherford Cetyl Pyridinium Chloride. Type of
Product: Indoor preservative and protectant. Active Ingredient: Cetyl
Pyridinium Chloride (CPC) at 97.8%. Proposed classification/Use: None.
For use on leather and leather products and processing liquors, paints,
textiles and
[[Page 1251]]
fibers of, paper and paper products and resin emulsions.
2. File symbol: 3090-EEN. Applicant: Sanitized, Inc. Contact:
Steward Klein, P.O. Box 2211, New Preston, CT 06777. Product Name: T99-
19. Type of Product: Textile treatment. Active Ingredient: Dimetyl
tetradecyl-[3-(trimethoxy silyl)-propyl] ammonium chloride at 40%.
Proposed classification/Use: None. For treatment on textiles products.
3. File symbol: 6836-EIG. Applicant: Lonza. Contact: Eliot Harrison
122 C St., NW., Suite 740, Washington, DC 20001 Product Name: Lonzabac
12. Type of Product: Antimicrobial. Active Ingredient: Bis (3
aminopropyl) dodecylamine.at 91.4%. Proposed classification/Use: None.
For treatment of hard non-porous in industrial and institutional sites.
4. File symbol: 6836-EIU. Applicant: Lonza. Contact: Eliot Harrison
122 C St., NW., Suite 740, Washington, DC 20001 Product Name: Lonzabac
Formulation LNZ-64. Type of Product: Disinfectant. Active Ingredient:
Bis (3 aminopropyl) dodeclamine at 4.86%. Proposed classification/Use:
None. For use in industrial and institutional sites on hard non-porous
surfaces.
5. File symbol: 5185-UOO. Applicant: Bio-Lab Inc. Contact: Mark
Jernigan, P.O. Box 300002 Lawrenceville, GA 30049-1002. Product Name:
Bellacide 350. Type of Product: Algicide, bactericide, fungicide.
Active Ingredient: Tributyl tetradecyl phosphonium chloride at 50%.
Proposed classification/Use: None. For recirculating cooling water and
process water systems.
6. File symbol: 74234-R. Applicant: Intralytix, Inc. Contact: Eliot
Harrison, 122 C St., NW., Suite 740, Washington, DC 2000. Product Name:
LMP-102. Type of Product: Non-food contact sanitizer. Active
Ingredient: Listeria Specific Bacteriophages. Proposed classification/
Use: None. For use as a sanitizer in food processing and handling
facilities.
7. File Symbol: 43813-ET. Applicant: William Goodwine, Janssen
Pharmaceutical, Inc., Plant and Material Protection Division, 1125
Trenton-Harbourton Road, Titusville, NJ 08560-0200. Product Name:
Econea Technical. Type of Product: Manufacturing Use Product (MUP).
Active Ingredient: 1H-Pyrrole-3-carbonitrile, 4-bromo-2-(4-
chlorophenyl)-5-trifluoromethyl at 93.2%. Proposed classification/Use:
None. For use as an antifoulant paint product.
8. File symbol: 1258-REUT. Applicant: Arch Chemical Co. Contact:
Gary Schifilliti, 1955 Lake Park Drive, Smyrna, Georgia 30080. Product
Name: Copper Omadine Powder AF. Type of Product: MUP. Active
Ingredient: Copper 2-Pyridinethiol-1-Oxide at 85%. Proposed
classification/Use: None. For use as an antifoulant paint product.
9. File Symbol: 11350-GL. Applicant: Sigma Coatings USA BV, Box
816, Harvey, LA 70059. Product Name: Sigma Nexxium 20 Antifouling. Type
of Product: Antifoulant. Active Ingredient: Contains 3.4% of the active
ingredient described in 43813-ET. Proposed classification/Use: None.
For use as an antifoulant paint product.
10. File Symbol: 2214-RT. Applicant: Tetra Industries, Inc., 25025
I-45 North The Woodlands, TX 77380. Product Name: Damprid. Type of
Product: Residential mold and mildew product. Active Ingredient:
Calcium chloride at 82%. Proposed classification/Use: None. For use on
mold and mildew.
11. File Symbol: 49403-GN. Applicant: Clariant Corporation, 4000
Monroe Road, Charlotte, NC 28205. Product Name: JMAC Composite PG
Technical. Type of Product: Manufacturing Use Only Product. Active
Ingredient: Silver chloride coated titanium dioxide at 100%. Proposed
classification/Use: None. For products to be applied to adhesives,
sealants, fibers, plastics, coatings.
12. File Symbol: 49403-EO. Applicant: Clariant Corporation, 4000
Monroe Road, Charlotte, NC 2820. Product Name: JMAC Composite PG. Type
of Product: Material preservatives. Active Ingredient: Silver chloride
treated titanium dioxide at 100%. Proposed classification/Use: None.
For material preservative; for adhesives, sealants, fibers, plastics,
coatings, films.
13. File Symbol: 39967-UO. Applicant: Lanxess Corporation, 100
Bayer Road, Pittsburg, PA 15025. Product Name: Preventol A5-S. Type of
Product: Manufacturing use product. Active Ingredient:
Methanesulfenamide, 1,1-dichloro-N-((dimethylamino)-1-fluoro-N-
(methylphenyl) at 98.1% (tolyfluanid). Proposed classification/Use:
None. For use as an antifoulant paint product.
14. File Symbol: 2693-ERU. Applicant: International Paint, Inc.,
2270 Morris Avenue, Union, NJ 07083. Product Name: Micron Extra P -
Blue. Type of Product: Antifoulant. Active Ingredient: Contains 1.96%
of the active ingredient in 39967-UO described above (tolyfluanid).
Proposed classification/Use: None. For use as an antifoulant paint
product.
15. File Symbol: 2693-ERL. Applicant: International Paint, Inc.,
2270 Morris Avenue, Union, NJ 07083. Product Name: Ultra P - Blue. Type
of Product: Antifoulant. Active Ingredient: Contains 1.64% of the
active ingredient in 39967-UO described above (tolyfluanid). Proposed
classification/Use: None. For use as an antifoulant paint product.
16. File symbol: 75269-E (MUP). Applicant: Keller and Heckman LLP,
US Agent for Rutgers Organics GmbH, 1001 G St., NW., Suite 500 West,
Washington, DC 20001. Product Name: Impralit KDS. Type of Product: Wood
Preservative. Active Ingredient: Polymeric betaine at 5.54%. Proposed
classification/Use: None. For use on wood.
17. File symbol: 75799-R (MUP). Applicant: Akzo Nobel Functional
Chemicals LLC, 5555 Spalding Drive, Suite 100, Norcross, GA 30092.
Product Name: PXTS Technical. Type of Product: Wood Preservative.
Active ingredient: Polyxylenol Tetrasulfide (PXTS) at 80.5%. Proposed
classification/Use: None. For use on wood.
18. File symbol: 75799-E-(EP). Applicant: Akzo Nobel Functional
Chemicals LLC, 5555 Spalding Drive, Suite 100, Norcross, Georgia 30092.
Product Name: PXTS Blend D (EP) 115. Type of Product: Wood Preservative
Active ingredient: Polyxylenol Tetrasulfide (PXTS) at 53.9%. Proposed
classification/Use: None. For use on wood.
19. File symbol: 43813-GG. Applicant: William Goodwine, Janssen
Pharmaceutical, Inc., Plant and Material Protection Division, 1125
Trenton-Harbourton Road, Titusville, NJ 08560-0200. Product Name:
Bethoguard Technical. Type of Product: Wood Preservative. Active
Ingredient: 3-(Benzo[b]thiophen-2yl)-5,6-dihydro-1,4,2-oxathiazine,4-
oxide at 96.6%. Proposed classification/Use: None. For use on wood.
20. File symbol: 43813-GU. Applicant: William Goodwine, Janssen
Pharmaceutical, Inc., Plant and Material Protection Division, 1125
Trenton-Harbourton Road, Titusville, NJ 08560-0200. Product Name:
Bethoguard. Type of Product: Wood Preservative. Active Ingredient: 3-
(Benzo[b]thiophen-2yl)-5,6-dihydro-1,4,2-oxathiazine,4-oxide at 96.6%.
Proposed classification/Use: None. For Use on wood.
21. File symbol: 43813-GL. Applicant: William Goodwine, Janssen
Pharmaceutical, Inc., Plant and Material Protection Division, 1125
Trenton-Harbourton Road, Titusville, NJ 08560-0200. Product Name:
Bethoguard 300 SC. Type of Product: Wood Preservative. Active
Ingredient: 3-(Benzo[b]thiophen-2yl)-5,6-dihydro-1,4,2-oxathiazine,4-
oxide at 31.1%. Proposed classification/Use: None. For use on wood.
[[Page 1252]]
List of Subjects
Environmental protection, Pesticides and pest.
Dated: December 23, 2004.
Jack E. Housenger,
Acting Director, Antimicrobials Division, Office of Pesticide Programs.
[FR Doc. 05-260 Filed 1-5-05; 8:45 am]
BILLING CODE 6560-50-S