[Federal Register: December 17, 2003 (Volume 68, Number 242)] [Notices] [Page 70256-70264] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr17de03-71] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [OPPT-2003-0069; FRL-7338-7] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSC, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 1, 2003 to November 28, 2003, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the docket ID number OPPT-2003-0069 and the specific PMN number or TME number, must be received on or before January 16, 2004. ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION. FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. How Can I Get Copies of this Document and Other Related Information? 1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2003-0069. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566- 0280. 2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/. An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select ``search,'' then key in the appropriate docket ID number. Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket. For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing [[Page 70257]] copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket. Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff. C. How and to Whom Do I Submit Comments? You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked ``late.'' EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute. 1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/ , and follow the online instructions for submitting comments. Once in the system, select ``search,'' and then key in docket ID number OPPT-2003-0069. The system is an ``anonymous access'' system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment. ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2003-0069 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an ``anonymous access'' system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e- mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption. 2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460- 0001. 3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2003-0069 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. D. How Should I Submit CBI to the Agency? Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT. E. What Should I Consider as I Prepare My Comments for EPA? You may find the following suggestions helpful for preparing your comments: 1. Explain your views as clearly as possible. 2. Describe any assumptions that you used. 3. Provide copies of any technical information and/or data you used that support your views. 4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide. 5. Provide specific examples to illustrate your concerns. 6. Offer alternative ways to improve the notice or collection activity. 7. Make sure to submit your comments by the deadline in this document. 8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish [[Page 70258]] periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 1, 2003 to November 28, 2003, consists of the PMNs, pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs This status report identifies the PMNs, pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non- CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 149 Premanufacture Notices Received From: 10/1/03 to 11/28/03 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-04-0001 10/01/03 12/29/03 Toyo Color America, (S) Ultraviolet (S) Poly(oxy-1,2- LLC curable additive for ethanediyl),.alpha.- optical lens (1-oxo-2-propenyl)- .omega.-([1,1'- biphenyl]-2-yloxy)- P-04-0002 10/01/03 12/29/03 Toyo Color America, (S) Ultraviolet (S) Hexanedioic acid, LLC curable oligomer for polymer with 1,6- optical lens diisocyanatohexane, 1,6-diisocyanato- 2,2,4- trimethylhexane, 1,6- diisocyanato-2,4,4- trimethylhexane, 1,1'-[(1- methylethylidene)bis (4,1- phenyleneoxy)]bis[2- propanol] and 3- methyl-1,5- pentanediol, 2-hyd roxyethyl acrylate- blocked P-04-0003 10/01/03 12/29/03 Toyo Color America, (S) Light stabilizer (S) 2-propenoic acid, LLC additive for 2-methyl-, 1,2,2,6,6- ultraviolet curable pentamethyl-4- glue piperidinyl ester P-04-0004 10/01/03 12/29/03 Toyo Color America, (S) Ultraviolet (S) Poly[oxy(methyl- LLC curable additive for 1,2- optical lens ethanediyl)],.alpha. ,.alpha'.-[(1- methylethylidine)di- 4,1- phenylene]bis[.omega .-[(1-oxo-2- propenyl)oxy]- P-04-0005 10/01/03 12/29/03 CBI (S) Adhesion promoter (G) Aminosilane in sealants; coupling agent for industrial coatings P-04-0006 10/01/03 12/29/03 Brueggemann Chemical (G) Additive (G) Arylphosphine U.S., Inc. copper iodide P-04-0007 10/01/03 12/29/03 Meadwestvaco (S) Intermediate used (G) Modified Corporation - for sterol saponified tall oil Specialty Chemicals production distillates Division P-04-0008 10/02/03 12/30/03 Vantico Inc. (S) Epoxy curing (G) Phenol, 4,4'-(1- agent methylethylidene)bis- , polymer with (chloromethyl)oxiran e, reaction products with an epoxide and triethylenetetramine P-04-0009 10/03/03 12/31/03 CBI (G) Petroleum (G) Alkylbenzene lubricant additive sulfonic acid P-04-0010 10/02/03 12/30/03 CBI (G) Developer for (G) Salicylic acid thermal sensitive compound paper P-04-0011 10/03/03 12/31/03 E. I. Dupont De (G) Injection molded (G) Aromatic - Nemours and Company, and extruded parts, aliphatic polyamides Inc. films, ribbons, tubes and filaments for high heat applications P-04-0012 10/03/03 12/31/03 E. I. Dupont De (G) Injection molded (G) Aromatic - Nemours and Company, and extruded parts, aliphatic polyamides Inc. films, ribbons, tubes and filaments for high heat applications P-04-0013 10/03/03 12/31/03 E. I. Dupont De (G) Injection molded (G) Aromatic - Nemours and Company, and extruded parts, aliphatic polyamides Inc. films, ribbons, tubes and filaments for high heat applications P-04-0014 10/03/03 12/31/03 E. I. Dupont De (G) Injection molded (G) Aromatic - Nemours and Company, and extruded parts, aliphatic polyamides Inc. films, ribbons, tubes and filaments for high heat applications P-04-0015 10/03/03 12/31/03 Gardere Wynne Sewell (S) Carrier for (S) Alkanes, C8 12 - LLP herbicides and branched pesticides; paint and ink formulations; indoor heating oil; solvent blend P-04-0016 10/06/03 01/03/04 CBI (G) Open, non- (G) Azo dyestuff dispersive (dyestuff) P-04-0017 10/03/03 12/31/03 CBI (G) Low foaming (G) Octyl-d-glucoside cleanser additive [[Page 70259]] P-04-0018 10/03/03 12/31/03 E. I. Dupont De (G) Intermediate (G) Salts of Nemours and Company, aliphatic amine with Inc. aromatic acid or with mixed aromatic and aliphatic acids P-04-0019 10/03/03 12/31/03 E. I. Dupont De (G) Intermediate (G) Salts of Nemours and Company, aliphatic amine with Inc. aromatic acid or with mixed aromatic and aliphatic acids P-04-0020 10/03/03 12/31/03 E. I. Dupont De (G) Intermediate (G) Salts of Nemours and Company, aliphatic amine with Inc. aromatic acid or with mixed aromatic and aliphatic acids P-04-0021 10/03/03 12/31/03 E. I. Dupont De (G) Intermediate (G) Salts of Nemours and Company, aliphatic amine with Inc. aromatic acid or with mixed aromatic and aliphatic acids P-04-0022 10/07/03 01/04/04 Cognis Corporation (G) Metal working (S) Fatty acids, fluid C14 18 and C16 18 unsaturated-2-ethyl hexyl esters P-04-0023 10/07/03 01/04/04 Petroferm Inc. (S) Slip and leveling (G) Allyl alcohol additive to ultra ethoxylate urethane violet and eb-cured inks, paints and coatings; oligomer in the manufacture of polymeric materials P-04-0024 10/07/03 01/04/04 Petroferm Inc. (S) Slip and leveling (G) Peg urethane additive to ultra violet and eb-cured inks, paints and coatings; oligomer in the manufacture of polymeric materials P-04-0025 10/07/03 01/04/04 CBI (G) Industrial (G) Aminated coatings binder styrenate acrylic salt P-04-0026 10/07/03 01/04/04 Petroferm Inc. (S) Slip and leveling (G) Combed silicone additive to ultra urethane violet and eb-cured inks, paints and coatings; oligomer in the manufacture of polymeric materials P-04-0027 10/07/03 01/04/04 Petroferm Inc. (S) Slip and leveling (G) Linear silicone additive to ultra urethane violet and eb-cured inks, paints and coatings; oligomer in the manufacture of polymeric materials P-04-0028 10/07/03 01/04/04 CBI (G) Intermediate for (G) Methylene di an electrical (phenylene insulating coating isocyanate) polymer with substituted propanol and secondary butyl phenol P-04-0029 10/08/03 01/05/04 CBI (S) Binder in hot (G) Cyclic diamine melt inks bisamide with monocarboxylic fatty acids P-04-0030 10/08/03 01/05/04 CBI (S) Binder in hot (G) Cyclic diamine melt inks bisamide with monocarboxylic fatty acids P-04-0031 10/08/03 01/05/04 BASF Corporation (G) Component used in (G) Hexanedioic acid, the manufacture of polymer with polyurethane parts aliphatic diols and diisocyanate P-04-0032 10/09/03 01/06/04 CBI (G) Papermaking (G) Aminopolyamide Chemical, non- resin dispersive use P-04-0033 10/09/03 01/06/04 CBI (G) Destructive use (G) Hindered phenolic ester P-04-0034 10/09/03 01/06/04 Bp Amoco Chemical (G) Grease thickener (G) Lithium grease Company Inc. thickener P-04-0035 10/09/03 01/06/04 CBI (G) Paper making (G) Cross-linked chemical aminopolyamide resin P-04-0036 10/10/03 01/07/04 CBI (G) Ingredients for (G) Heterocycle (oxa, use in consumer thia, aza) products: highly dispersive P-04-0037 10/10/03 01/07/04 CBI (G) Moisture curing (G) Isocyanate polyurethane terminated urethane adhesives polymer P-04-0038 10/10/03 01/07/04 CBI (G) Additive for (G) Acrylic polymer plastics P-04-0039 10/10/03 01/07/04 CBI (G) Chemical (G) intermediate Hydroxycycloalkanone P-04-0040 10/14/03 01/11/04 CBI (S) Surfactant for (G) Polyethylene metal finishing glycol benzyl alkyl baths ether P-04-0041 10/14/03 01/11/04 CBI (G) Fixing agent (G) Polymeric amine P-04-0042 10/14/03 01/11/04 CBI (G) Fixing agent (G) Polymeric amine P-04-0043 10/15/03 01/12/04 CBI (G) A component of a (G) Epoxy amine pigmented epoxy adduct resin for coating and surfacing P-04-0044 10/15/03 01/12/04 CBI (G) Lubricant base (G) Fatty acid esters fluid with neopentyl glycol P-04-0045 10/15/03 01/12/04 CBI (G) Coating binder (G) Epoxy-acrylic copolymer P-04-0046 10/17/03 01/14/04 CBI (G) Dispersant (G) Polyether carboxylate P-04-0047 10/17/03 01/14/04 CBI (G) Dispersant (G) Polyether carboxylate P-04-0048 10/17/03 01/14/04 CBI (G) Dispersant (G) Polyether carboxylate [[Page 70260]] P-04-0049 10/17/03 01/14/04 CBI (G) Dispersant (G) Polyether carboxylate P-04-0050 10/17/03 01/14/04 CBI (G) Laminating (G) Polyurethane adhesive P-04-0051 10/17/03 01/14/04 CBI (G) Destructive use (G) Substituted aluminoxane P-04-0052 10/17/03 01/14/04 CBI (G) Open, non- (G) Cationic dispersive (resin) polyacrylamide P-04-0053 10/17/03 01/14/04 Toyo Color America, (S) Ultra violet (S) 2-propenoic acid, LLC curable monomer for 1,9-nonanediyl ester optical lens P-04-0054 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0055 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0056 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0057 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0058 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0059 10/22/03 01/19/04 Ashland Inc., (G) Adhesive, (G) Multifunctional Environmental Health coating, ink acrylate oligomer and Safety resin P-04-0060 10/21/03 01/18/04 CBI (G) Coating component (G) Substituted metal complex P-04-0061 10/21/03 01/18/04 CBI (G) Coating component (G) Substituted metal complex P-04-0062 10/21/03 01/18/04 CBI (G) Coating component (G) Modified metal complex P-04-0063 10/21/03 01/18/04 CBI (G) Adhesive-closed (G) Aromatic system copolyamic acid P-04-0064 10/21/03 01/18/04 CBI (S) Inks; coatings (G) Polyester acrylate P-04-0065 10/21/03 01/18/04 CBI (G) Surfactant (G) Alkylammonium ether sulfate P-04-0066 10/22/03 01/19/04 CBI (G) Coatings, (G) Polybutadiene adhesives and acrylate printing plates P-04-0067 10/22/03 01/19/04 CBI (G) Coatings, (G) Polybutadiene adhesives and acrylate printing plates P-04-0068 10/22/03 01/19/04 CBI (S) Ingredient in (S) 3-pentanol, 2,2,4- fragrance compound trimethyl-1-[(2- methyl-2- propenyl)oxy]- P-04-0069 10/23/03 01/20/04 CBI (G) Adhesion promoter (G) Acid modified for coatings chlorinated polyolefin P-04-0070 10/23/03 01/20/04 CBI (G) Additive, open, (G) Polyether fatty non-dispersive acid ester P-04-0071 10/23/03 01/20/04 CBI (G) Additive, open, (G) Silicone non-dispersive containing acidic polyester P-04-0072 10/23/03 01/20/04 CBI (G) Additive, open, (G) Acidic polyester non-dispersive P-04-0073 10/23/03 01/20/04 The Dow Chemical (S) Ultra violet (G) Vinyl ester of Company curable resin for epichlorohydrin/ coatings bisphenol-a polymer P-04-0074 10/23/03 01/20/04 The Dow Chemical (S) Ultra violet (G) Vinyl ester of Company curable resin for epichlorohydrin/ coatings bisphenol-a polymer P-04-0075 10/24/03 01/21/04 CBI (S) Viscosity (G) Modified aluminum modifier for the alkoxide manufacture of ink vehicles P-04-0076 10/27/03 01/24/04 CBI (G) Resin coating (G) Polyester acrylate P-04-0077 10/27/03 01/24/04 CBI (G) Polymer material (G) Acrylic copolymer for pigment P-04-0078 10/27/03 01/24/04 CBI (G) Polymer material (G) Acrylic copolymer for pigment P-04-0079 10/27/03 01/24/04 CBI (S) Monomer used in (G) Halogen- the production of substituted oxetane reactive polymers for surface coating materials and other polymer intermediates [open / non-dispersive use] P-04-0080 10/27/03 01/24/04 CBI (S) Monomer used in (G) Halogen- the production of substituted oxetane reactive polymers for surface coating materials and other polymer intermediates [open / non-dispersive use] P-04-0081 10/27/03 01/24/04 CBI (S) Thickness and (G) Polyalkylene rheology modifiers glycol, alkyl ether, for emulsion paint reaction products with diisocyanatoalkane and polyalkylene glycol [[Page 70261]] P-04-0082 10/27/03 01/24/04 CBI (S) Thickness and (G) Polyalkyene rheology modifiers glycol, alkyl ether, for emulsion paint reaction products with diisocyanatoalkane and polyalkylene glycol P-04-0083 10/27/03 01/24/04 CBI (S) Water proofing (S) Amines, N-C16 22- for fibersheets alkyltrimethylenedi- P-04-0084 10/28/03 01/25/04 CBI (G) Component of (G) Substituted paper or plastic acrylate polymer coating P-04-0085 10/28/03 01/25/04 CBI (S) Thickener for (G) Acrylic- coating Colors acrylonitrile applied to paper and copolymer paperboard P-04-0086 10/28/03 01/25/04 CBI (G) Industrial (G) C16 18 fatty acid corrosion inhibitor product with polyethylene, phosphonomethylated P-04-0087 10/28/03 01/25/04 CBI (S) Siloxane polymer (G) Blocked siloxane used as a raw polymer material in photoresist P-04-0088 10/29/03 01/26/04 Shin-Etsu silicones (S) Sealant (G) Silicone modified of America Inc. acrylic polymer P-04-0089 10/29/03 01/26/04 CIBA Specialty (S) Photoinitiator (G) Aromatic compound- Chemicals for overprint photoinitiator Corporation varnishes and printing inks P-04-0090 10/29/03 01/26/04 CBI (G) Rust inhibition (G) Triazine reagent derivative P-04-0091 10/29/03 01/26/04 R. T. Vanderbilt (S) Anti-wear and (S) Carbamodithioic Company, Inc. antioxidant additive acid, dipentyl-, for lubricants, compound with n- especially greases pentyl-1-pentanamine (1:1) P-04-0092 10/29/03 01/26/04 R. T. Vanderbilt (S) Anti-wear and (S) Carbamodithioic Company, Inc. antioxidant additive acid, bis(2- for lubricants, ethylhexyl)-, especially greases compound with 2- ethyl-n-(2- ethylhexyl)-1- hexanamine (1:1) P-04-0093 10/29/03 01/26/04 R. T. Vanderbilt (S) Anti-wear and (G) Dialkylamine Company, Inc. antioxidant additive dialkyldithiocarbama for lubricants, te especially greases P-04-0094 10/29/03 01/26/04 R. T. Vanderbilt (S) Anti-wear and (S) Carbamodithioic Company, Inc. antioxidant additive acid, ditridecyl-, for lubricants, branched, compounds especially greases with branched n- tridecyl-1- tridecanamine P-04-0095 10/29/03 01/26/04 CBI (G) Open, non- (G) Polyurethane dispersive (resin) dispersion P-04-0096 10/30/03 01/27/04 CBI (G) Reactive additive (G) Functionalized for a coating diether formulation P-04-0097 10/31/03 01/28/04 Zeon Chemicals L.P. (S) Polymerization (G) Cycloaliphatic monomer ester P-04-0098 10/31/03 01/28/04 CBI (G) Resin coating (G) Urethane acrylate P-04-0099 10/31/03 01/28/04 Engelhard Corporation (G) Intermediate (G) Intermediate for diazo yellow pigment P-04-0100 11/03/03 01/31/04 CBI (G) Open, non- (G) Fatty acid amide dispersive (bulking amine agent) P-04-0101 11/03/03 01/31/04 CBI (G) Emulsifier (G) Polyolefin aminoester P-04-0102 11/03/03 01/31/04 Degussa Corporation (S) Coating systems (G) Aqueous ketone- and printing inks aldehyde resin P-04-0103 11/03/03 01/31/04 CBI (S) Automotive (G) industry Cycloaliphaticdiisoc yanate, homopolymer, compound with alkanedioic acid ester P-04-0104 10/31/03 01/28/04 Johnson Polymer (G) Polymeric coating (G) Acrylic copolymer vehicle P-04-0105 11/04/03 02/01/04 CBI (G) Water removal and (G) Alkyl oxirane - drag reduction for epichlorohydrin - transport of liquids alkyl bis(phenol) - and gases polyhydroxy polyol P-04-0106 11/04/03 02/01/04 Transmare Houston (S) Carrier for (S) Alkanes, C8 12- Inc. herbicides and branched and linear pesticides; paint and ink formulations; indoor heating oil; solvent blend for cleaning P-04-0107 11/05/03 02/02/04 Eastman Kodak Company (G) Contained use in (G) Substituted amino digital and imaging ethane sulfonic acid products salt P-04-0108 11/05/03 02/02/04 Conocophillips (S) Olefin (G) Naphtha Company manufacturing feedstock; Specialty solvents; alcohol denaturant; fuel blendstock P-04-0109 11/06/03 02/03/04 CBI (G) Reactant in (G) Amine prepolymer thermoset coating or adhesive formulation; degree of containment --- (c) open, non- dispersive use P-04-0110 11/06/03 02/03/04 Archer Daniels (S) Co-adhesive for (S) Linseed oil, Midland Company composite panel conjugated products P-04-0111 11/06/03 02/03/04 CBI (S) Plasticizer for (G) Polycarboxylated concrete and cement ether P-04-0112 11/10/03 02/07/04 CBI (G) Open non- (G) Polyester dispersive (resin) polyurethane resin P-04-0113 11/10/03 02/07/04 CBI (G) Open non- (G) Acrylic acid dispersive (acrylate ester resin) [[Page 70262]] P-04-0114 11/10/03 02/07/04 International flavors (S) Raw material for (S) 94-98%indeno[4,4- and; Fragrances Inc. use in fragrances d]-1,3-dioxin, 4, for soaps, 4a, 5, 6, 7, 8, 9, detergents, cleaners 9b-octahydro- and other household 7,7,8,9,9- products pentamethyl P-04-0115 11/07/03 02/04/04 Zeon Chemicals L.P. (S) Electron beam (S) 2-propenoic acid, resist in the 2-chloro-, methyl manufacture of ic ester, polymer with chips and masks via (1- microlithography methylethenyl)benzen processes e P-04-0116 11/12/03 02/09/04 CBI (G) Coating resin for (G) Amino alkyl open, no-dispersive alcohol modified use fluoropolymer P-04-0117 11/12/03 02/09/04 BASF Corporation (S) Additive for ink (S) 1,2-pentanediol jet printing inks P-04-0118 11/12/03 02/09/04 Invista Inc. (S) Intermediate for (G) Triamine adipate polymer manufacture salt P-04-0119 11/12/03 02/09/04 Invista Inc. (G) Polymer for fiber (G) Aliphatic polyamide P-04-0120 11/12/03 02/09/04 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate polyurethane functional polyester adhesive polyether urethane polymer P-04-0121 11/10/03 02/07/04 CBI (G) Laminating (G) Polyurethane adhesive P-04-0122 11/13/03 02/10/04 CBI (G) Rubber elastomer (G) Mdi/carbonate for tires, wheels, prepolymer rolls and other Specialty urethane applications P-04-0123 11/13/03 02/10/04 CBI (G) Rubber elastomer (G) Ppdi/carbonate/ for tires, wheels, caprolactone/ether rolls and other prepolymer Specialty urethane applications P-04-0124 11/14/03 02/11/04 CBI (G) Controlled (G) Polymethylene release of catalyst polyphenylene polyurea polymer P-04-0125 11/17/03 02/14/04 CIBA Specialty (S) Exhaust dyeing of (G) Reaction products Chemicals cellulosic fibers of substituted Corporation, Textile benzenesulfonic acid Effects azo substituted phenyl amino compound and substituted amino phenyl compound P-04-0126 11/17/03 02/14/04 CBI (S) Flame retardant (G) Diphosphoric for plastic articles acid, amine salt P-04-0127 11/18/03 02/15/04 CBI (G) Fuel additive (G) Polyether/ allylphenol modified siloxane P-04-0128 11/19/03 02/16/04 Eastman Kodak Company (G) Contained use in (G) Heterocyclic an article substituted butanoic acid ester P-04-0129 11/18/03 02/15/04 Ashland Inc., (G) Raw material in (G) Multifunctional Environmental Health higher molecular acrylate oligomer and; Safety weight polymer resin product P-04-0130 11/17/03 02/14/04 CBI (G) Viscosity index (G) Alkyl improver methacrylates copolymer P-04-0131 11/20/03 02/17/04 CBI (G) Open, non- (G) Blocked dispersive use isocyanate resin P-04-0132 11/20/03 02/17/04 CBI (G) Additive for (G) Ethylhexyl industrial oxetane applications P-04-0133 11/19/03 02/16/04 CBI (S) Dispersing and (G) Polyester wetting agent polyamide P-04-0134 11/20/03 02/17/04 CIBA Specialty (S) Continuous dyeing (G) Reaction products Chemicals of nylon carpet of substituted amino Corporation, Textile anthracenesulfonic effects acid and substituted triazine amino phenyl compound P-04-0135 11/21/03 02/18/04 CBI (G) Open non- (G) Polyester dispersive urethane (polyurethane lacquer) P-04-0136 11/21/03 02/18/04 CBI (S) Production of (G) Polyetherimide molded or extruded polymer articles or as component of other industrial products P-04-0137 11/21/03 02/18/04 CBI (G) Emulsifier for (G) Polyalkylene emulsion glycol alkyl ether polymerization sulfate, reaction products with allyl glycidyl ether, ammonium salt P-04-0138 11/21/03 02/18/04 CBI (G) Component of (G) Substituted paper or plastic acrylate polymer coating P-04-0139 11/24/03 02/21/04 CBI (G) Additive for (G) Modified various cleaners amidoamine P-04-0140 11/24/03 02/21/04 CBI (G) Additive for (G) Fatty acid ester cleaning products salt P-04-0141 11/24/03 02/21/04 CBI (G) Additive for (G) Modified various cleaners aminoamine P-04-0142 11/24/03 02/21/04 CBI (G) Additive for (G) Modified various cleaners amidoamine P-04-0143 11/24/03 02/21/04 CBI (G) Additive for (G) Modified various cleaners amidoamine P-04-0144 11/24/03 02/21/04 CBI (G) Chemical (G) Modified intermediate; amidoamine destructive use P-04-0145 11/24/03 02/21/04 CBI (G) Open non- (G) Polyisocyanate dispersive (coating material) P-04-0146 11/25/03 02/22/04 Solvay Fluorides, (S) Flux for brazing (S) Potassium zinc Inc. aluminum fluoride P-04-0147 11/25/03 02/22/04 CBI (G) Chemical (S) Hydroxylamine, o- intermediate [(2e)-3-chloro-2- propyl]- [[Page 70263]] P-04-0148 11/25/03 02/22/04 CBI (G) Paraffin (G) Olefin - maleic inhibitor anhydride esterified polymer P-04-0149 11/25/03 02/22/04 Invista Inc. (G) Polymer for fiber (G) Aliphatic polyamide P-04-0150 11/25/03 02/22/04 CBI (S) Fertilizer for (S) Seaweed extract turf and crops (saragassum thumbergii) P-04-0151 11/25/03 02/22/04 CBI (S) Bicyclic tertiary (G) Bicylic tertiary amine salt used as a amine salt photoresist component P-04-0152 11/28/03 02/25/04 CBI (G) Resin coating (G) Polyester acrylate -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: II. 80 Notices of Commencement From: 10/01/03 to 11/28/03 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-00-0119 11/12/03 10/10/03 (G) Polyol ester P-00-0157 11/17/03 10/17/03 (G) Organo silane ester P-00-0406 10/08/03 03/26/01 (G) Calcium fatty acid complex P-00-0900 10/06/03 09/12/03 (G) Polyalkene, sulfonated P-00-0901 10/06/03 09/17/03 (G) Polyalkylene sulfonate, salts P-01-0292 10/20/03 10/10/03 (S) Silane, trimethoxyoctyl- P-01-0527 10/29/03 10/09/03 (G) Polyester polyol P-01-0637 11/20/03 11/10/03 (G) Polyurethane resin P-01-0728 11/03/03 10/14/03 (G) Oligomeric ester, capped with iso-alcohols P-01-0790 11/04/03 10/10/03 (G) Aluminum alkoxide complex P-02-0587 10/23/03 10/08/03 (G) Polyester polyether isocyanate P-02-0693 10/01/03 09/15/03 (G) Saturated hydrocarbon P-02-0795 11/17/03 10/26/03 (G) Copolymer P-02-0797 11/17/03 10/26/03 (G) Copolymer P-02-0873 10/28/03 10/01/03 (G) Polyurethane prepolymer P-02-1013 11/05/03 07/24/03 (G) Modified polyvinyl butyral P-03-0007 11/18/03 09/04/03 (G) Alkyl cinnamic aldehyde P-03-0035 11/25/03 10/27/03 (G) Alkene acrylate copolymer P-03-0045 11/05/03 09/30/03 (S) Glycerides, soya mono- and di-, phosphates, sodium salts P-03-0047 11/26/03 11/11/03 (S) Benzenemethanaminium, n-(3-aminopropyl)-n,n- dimethyl-, n-soya acyl derivs., chlorides P-03-0176 10/10/03 09/11/03 (G) Urethane acrylate P-03-0181 11/25/03 10/27/03 (G) Amino resin modified polyether polyurethane P-03-0182 10/29/03 10/03/03 (G) Polysulfonated dpo/ diphone P-03-0194 10/21/03 09/30/03 (G) Bis[phenyl, 2h-1,3- benzoxazine] derivative P-03-0227 10/07/03 09/09/03 (G) Substituted phenolic resin P-03-0258 10/07/03 09/26/03 (S) 2,5-furandione, dihydro-3-[3- (triethoxysilyl)propyl]- P-03-0276 10/31/03 10/16/03 (G) Polyalkylenecarbonate diol P-03-0277 10/31/03 10/16/03 (G) Polyalkylenecarbonate diol P-03-0301 10/07/03 09/29/03 (G) Vinyl acrylic emulsion polymer P-03-0329 11/06/03 10/21/03 (G) Trialkylamine salt of substituted alkyarylpolyurethane P-03-0343 10/17/03 09/12/03 (G) Acrylic polymer P-03-0344 10/17/03 09/30/03 (G) Acrylic polymer P-03-0362 10/28/03 10/23/03 (G) Thionocarbamate derivative or modified thionocarbamate P-03-0423 10/17/03 10/01/03 (G) Modified polyol P-03-0438 11/21/03 11/09/03 (G) Polyether modified polyurethane urea P-03-0439 10/07/03 10/01/03 (G) Polyether modified polyurethane urea P-03-0451 11/14/03 10/27/03 (G) Silicone polyether P-03-0478 10/08/03 09/29/03 (G) Substituted -9,10- dihydro-9,10-dioxo- anthracentyl-phenylhalo compound P-03-0479 10/08/03 09/29/03 (G) Substituted -9,10- dihydro-9,10-dioxo- anthracentyl-phenylhalo compound P-03-0480 10/08/03 09/29/03 (G) Substituted -9,10- dihydro-9,10-dioxo- anthracentyl-phenylhalo compound P-03-0484 11/12/03 10/24/03 (G) Fatty ester P-03-0502 11/18/03 10/31/03 (S) Benzene, ethenyl-, polymer with cyclopentene and 1,3-pentadiene P-03-0518 11/20/03 11/06/03 (G) Acrylic polymer P-03-0528 11/12/03 10/19/03 (G) 2-propenoic acid, 2- methyl-, polymer with 1,2- ethanediyl bis(2-methyl-2- propenoate), 2-ethyl-2- [[(2-methyl-1-oxo-2- propenyl)oxy]methyl]-1,3- propanediyl bis(2-methyl- 2-propenoate) and methyl 2-methyl-2-propenoate, compound with-imidazole P-03-0530 10/10/03 09/11/03 (G) Salt of a polyalkylenepolyamine derivative P-03-0531 10/10/03 09/11/03 (G) Salt of mixed fatty amidoamines [[Page 70264]] P-03-0536 11/06/03 10/21/03 (G) Polymer of substituted allylamine P-03-0554 10/08/03 09/10/03 (G) Polyurethane P-03-0555 10/15/03 10/03/03 (G) Isocyanate functional polyester polyether urethane polymer P-03-0563 11/25/03 10/29/03 (S) 2-propenoic acid, 2- methyl-, 2- ethyltricyclo[3.3.1.13,7] dec-2-yl ester P-03-0565 11/25/03 11/20/03 (S) 2-propenoic acid, 2- methyltricyclo[3.3.1.13,7 ]dec-2-yl ester P-03-0573 10/28/03 10/24/03 (G) Polyester resin P-03-0581 10/08/03 09/24/03 (G) Telechelic polyacrylate P-03-0583 10/10/03 09/11/03 (G) Polyurethane P-03-0584 11/18/03 11/05/03 (G) Urethane acrylate P-03-0585 10/07/03 09/27/03 (S) 1,3-benzenedisulfonic acid, 4-[bis[4- (diethylamino)phenyl]meth yl]-6-hydroxy- P-03-0588 11/26/03 11/02/03 (G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), calcium sodium salt P-03-0590 10/16/03 10/08/03 (S) 1-hexanol, 3-mercapto- P-03-0609 11/17/03 11/04/03 (G) Oligomer of aromatic, alkyl amines and alkyl epoxide P-03-0613 11/12/03 10/07/03 (G) Modified diaryliodoniumhexafluoroa ntimonate P-03-0623 11/21/03 10/29/03 (G) Amino epoxy silane P-03-0635 11/04/03 10/09/03 (G) Acrylate, acrylonitrile, butadiene rubber-extended epoxy resin polymer P-03-0636 10/15/03 10/02/03 (G) Epoxy acrylate oligomer P-03-0644 10/10/03 10/02/03 (G) Acrylate ester P-03-0646 10/15/03 09/23/03 (G) Cationic amine salt epoxy resin P-03-0648 10/30/03 10/10/03 (S) 2-propenoic acid, 2- methyl-, 1,2-ethanediyl ester, polymer with butyl 2-methyl-2-propenoate P-03-0651 10/15/03 10/03/03 (G) Polyurethane P-03-0656 10/06/03 09/24/03 (S) Fatty acids, sunflower- oil, esters with propylene glycol P-03-0666 11/04/03 10/27/03 (G) Distillation residue from glycol production P-03-0678 11/17/03 10/21/03 (G) Styrene-acrylic copolymer P-03-0714 11/25/03 11/13/03 (G) Aluminum alkoxide complex P-03-0722 10/30/03 10/22/03 (G) Pyrazolone derivative P-03-0729 11/18/03 11/10/03 (G) Alkyleneoxide derivatives P-03-0731 11/24/03 10/23/03 (G) Polypropylene glycol, polymer with a carbomonocyclic diisocyanate, substituted- trialkoxysilane-blocked P-03-0733 11/12/03 11/04/03 (G) Aspartic ester P-92-0353 10/28/03 10/01/03 (G) Substituted polyhydroxy aromatic compound P-98-0777 11/05/03 10/13/03 (S) Mixture of: alpha-d- glucopyranoside, ,1-6-bis- o-(1-oxooctyl)-b-d- fructofuranosyl and alpha- d-glucopyranoside, 6-o-(1- oxooctyl)-b-d- fructofuranosyl P-98-0943 11/12/03 10/27/03 (G) Substituted-[(1,2,3,4- tetrahydro-5,8-dihydroxy- 1,4-methanonaphthalene - 6,7- diyl)bis(methylene)]bis P-99-0916 10/15/03 09/30/03 (G) Telogen, telomer with alkenes and alkenyl acetate ---------------------------------------------------------------------------------------------------------------- List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: December 4, 2003. Anthony Cheatham, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. E3-00565 Filed 12-16-03; 8:45 am] BILLING CODE 6560-50-S