I. PARTNERS
The partners to this agreement are:
- The National Association of Tower Erectors (NATE)
- The Occupational Safety and Health Administration
- Participating NATE members (shall be referred to as participants throughout the Partnership
Agreement document)
Refer to Appendix A for participant eligibility criteria.
II. PURPOSE, SCOPE, and BACKGROUND
A. Purpose/Scope
This partnering agreement was developed jointly by the National Association of Tower Erectors (NATE)
and the Occupational Safety and Health Administration (OSHA). Realizing the importance of safety for
their members, NATE agrees to increase its commitment and resources toward providing a safe and
healthful working environment for its employees and contractors. For instance, this agreement
provides for the placement of a competent person, responsible for employee safety and health efforts
on all tower sites. Additionally, NATE has developed an organized system for partners to
self-conduct safety and health audits for 10 percent of their work sites (or 24 total worksites,
whichever is less), and report the results of such audits to NATE, who will then aggregate the
results and forward to OSHA. In turn, OSHA anticipates the Partnership will increase OSHA’s
visibility among NATE’s membership and further enhance the cooperative relationship between the two
organizations.
The partners will work to provide a safe and healthful work environment for employees and
contractors involved in the telecommunications tower erection industry by preventing serious
accidents and fatalities through increased training, implementation of best work practices,
enhancement of safety and health management systems, and compliance with applicable OSHA standards
and regulations.
Partnership goals will be accomplished by focusing the efforts, skills, knowledge, and resources of
NATE and OSHA to benefit tower erector industry employees. Increased communication and respect
between partners are additional benefits expected to be realized through this Partnership.
B. Background
Advances in telecommunications and an increasing dependence on wireless communications and broadcast
services have fueled the construction, service and maintenance of telecommunication and broadcast
towers throughout the country. With this unprecedented growth, the telecommunications and broadcast
tower erection industry and the safety and health community have expressed concerns about work
practices and the health and safety of tower workers. As a result, NATE and OSHA have worked jointly
for several years to improve the safety and health of tower workers.
One such successful endeavor was the OSHA Strategic Partnership between NATE and OSHA’s Region V,
established December of 2001. Additionally, in 1996, OSHA established the Tower Task Force to
address the concerns of this industry. OSHA and NATE have jointly conducted telecommunications and
broadcast tower safety and health training for both industry representatives and OSHA personnel in
order to provide education on best work practices with regard to the erection of telecommunications
towers.
NATE is an association that represents the employers of employees who erect, service and maintain
telecommunication and broadcast towers. This trade association was formed in 1995, and more than 500
companies are members. The companies range in size from five to 300 employees, with 99% having fewer
than 200 employees and 85% having 15 or fewer employees.
III. GOALS, STRATEGIES, AND MEASURES
GOALS |
STRATEGIES |
MEASURES |
1) Reduce the percentage of injuries, illnesses and
fatalities of participating telecommunication and broadcast tower erection employers, and their
subcontractors, to an aggregate rate that is below the BLS average, based on most recently
published data. |
- Analyze participant data to identify causal factors and corrective actions. Share corrective
actions.
- Establish a baseline year to provide for the analysis of results.
- Participants to use tools such as the NATE Site Safety Audit Checklist. See Appendix E.
- Create/disseminate safety and health materials to NATE participants.
- OSHA to provide 10 Hour training up to two times a year as resources allow. All supervisory
personnel to receive OSHA 30 hour training.
- Develop, implement, and share best practices with participants. Establish a website or tool
to communicate best practices among participating NATE members. For example, produce/disseminate
guidelines for the use of gin poles and tower maintenance activities.
- Participants to provide 100% fall protection.
- Review annually and provide feedback on participants’ safety and health management systems as
needed.
|
- OSHA 300 Logs
- Percent of participant employees and contractors receiving requisite OSHA 10 or 30 hour
training
- Percent of participants using each tool
- Number of best practices developed and the percentage of implementation among NATE
participants
- Number of injuries/fatalities related to falls (compared to baseline)
- Number of casual factors identified and abated by participants
- Percentage of participants Safety and Health Management Systems reviewed by NATE as part of
the application agreement process.
- Percent or number of fatalities reduced from baseline
- Results of NATE audits
|
2) Recognize participants that successfully achieve
reductions in illnesses, injuries, and fatalities. |
- Develop a recognition system to recognize participants for reductions in injuries, illnesses
and fatalities in the telecommunications and broadcast tower erection industry.
|
- Number and percentage of participants recognized
|
3) Improve awareness of OSHA Compliance Safety and
Health Officers (CSHO’s) on the hazards/issues associated with the tower erecting industry. |
- Increase the number of employees that attend the OSHA 3150 Tower Safety course.
|
- Number of CSHO’s completing the course from the time of the established baseline.
|
IV. ANNUAL EVALUATION
The Partnership will be evaluated on an annual basis using the Strategic Partnership Annual
Evaluation Form as specified in Appendix C of CSP 03-02-002, OSHA Strategic Partnership Program for
Worker Safety and Health Directive. It will be the responsibility of NATE to gather required
participant data to evaluate and track the overall results and success of the Partnership. This data
will be shared with OSHA through the Partnership Management Team (PMT) (see Section VIII). It will
be the responsibility of OSHA to finalize the evaluation, with input from its partners.
V. OSHA VERIFICATION
OSHA shall verify participant compliance with the Partnership agreement through offsite
verification. OSHA will review Partnership data provided with the application forms (See Appendix C)
and reports submitted annually by NATE. Documentation is reviewed to determine whether partners are
implementing the provisions of the Partnership agreement. The documentation selected for review will
relate to the goals, objectives and stated measures of the Partnership agreement. Examples include
illness and injury data, training course agendas and rosters, and the annual report on the results
of the self-audit. Verification shall be accomplished on an annual basis and will coincide with the
annual evaluation. Verification will consist of CEO signatures attesting to meeting partnership
requirements, and the site safety and health audits submitted to NATE.
Partnering employers remain subject to OSHA programmed inspections, referrals, and investigations
for formal complaints, fatality/catastrophes and imminent danger situations in accordance with
agency policies and procedures. Employees remain assured of their statutory rights with regard to
inspection participation. OSHA will use the Telecommunication and Broadcast Tower Inspection
Checklist (See Appendix D) when conducting programmed inspection activity at participant sites. OSHA
will not expand beyond the normal scope of focused inspections for construction, nor will they
address issues beyond the checklist unless those items are not properly addressed. OSHA reserves the
right to expand the inspection scope if the items are not properly addressed. Citations will be
issued and penalties assessed for violations of statutes, regulations or the general duty clause
consistent with OSHA policies and procedures and this Partnership. See Section VIII,
Employee/Employer Rights and Responsibilities.
VI. BENEFITS
The following benefits are available to qualifying participants:
- Focused Inspections
Programmed inspections of participants will be limited to the aforementioned inspection checklist as
outlined above (See Appendix D) and any observable hazards. If necessary, those checklist items
and/or observed hazards should then be properly addressed. OSHA reserves the right to expand the
inspection scope if the checklist items or observed hazards are not properly addressed, or if the
site falls outside of the criteria required for conducting focused inspections in construction.
- Unprogrammed Inspection Activity
Complaints, Referrals, or Fatality inspections shall be conducted per the FIRM.
- Citation Issuance
When calculating the initial penalty reduction, OSHA will provide an additional 10% reduction for
good faith beyond the reductions provided in the FIRM where the employer, in implementing the OSP,
has taken specific significant steps beyond those provided in the FIRM to implement the Act and
achieve a high level of employee protection (see FIRM, Chapter IV.C.2.i.5[b]). This additional
reduction will not apply to high gravity serious, willful, failure to abate or repeat citations. In
cases where a partner’s total penalty reduction is 100 percent or more, the minimum penalty
provisions of the FIRM will apply (see FIRM, Chapter IV.C.2.b).
In the event that a citation with penalty is issued to an OSP partner, the Regional Administrator
(RA) has the authority to negotiate the amount of penalty reduction as part of the informal
conference settlement agreement.
No citations will be issued for other-than-serious violations when the violations are immediately
abated.
- Priority Consideration
As resources allow, participants will receive priority consideration for compliance assistance and
offsite technical assistance (phone calls/faxes) by OSHA . Where appropriate, OSHA-funded State
Consultation Projects will be encouraged to participate in this Partnership and/or offer assistance
to participating members.
- Recognition
Recognition such as certificates and press releases issued by OSHA, recognition on OSHA’s web page,
worksite banners, letters and plaques will be available to Partnership participants.
VII. PARTNERSHIP MANAGEMENT AND OPERATION
Representatives from NATE and OSHA will jointly manage the Partnership. The Partnership Management
Team (PMT) will consist of the following representatives:
- OSHA’s Directorate of Cooperative and State Programs (1)
- OSHA’s Directorate of Construction (1)
- OSHA’s Directorate of Enforcement Programs (1)
- OSHA Field Representation (2)
- NATE Executive Committee (3)
- NATE Executive Director (1)
- NATE OSHA Relations Committee Member (1)
- NATE Legislative and Regulatory Committee Member (1)
- OSHA State Plan States are encouraged to adopt this Partnership, and if appropriate, a state plan
representative may be selected for participation on PMT.
In addition to their responsibilities as part of the PMT, the partners commit
to the following individual roles:
NATE will:
- Administer the application and certification protocol (including review of participant safety and
health audits) of participating companies (see Appendices A and B);
- Ensure compliance with partnership requirements, including adherence to OSHA’s Partnership
Directive;
- Supply OSHA with an initial list of eligible participants for review and inclusion in this
Partnership agreement. Submit a new list annually thereafter for review by OSHA. This process will
assist in the overall tracking of the industry performance;
- Continue to increase its commitment and resources to safety and health efforts;
- Participate in the PMT;
- Continue to share and mentor prospective Partnership candidates in broadcast and
telecommunications tower best practices; and
- Track and report data for participant companies to OSHA (see Section III);
- Help identify programmatic needs of this Partnership by reviewing the documented safety and
health management systems of participating members
- Help identify (through the review of OSHA 300 logs) accidents, near misses, and primary causal
factors in injuries and illnesses and strategies to improve.
- Identify best practices to be shared among NATE members and OSHA.
OSHA will:
- Support NATE in providing assistance to participants to improve their safety and health
management systems;
- Assist with a trend analysis of the identified accidents, near misses, primary causal factors of
injuries and illnesses, and in coordination with NATE, recommend strategies to improve;
- Provide information on training resources, including available OSHA Training Institute (OTI) and
OSHA Education Centers Courses;
- Assist partners in accessing interpretations and clarifications as to the meaning and application
of OSHA standards and policy;
- Participate in training sessions and meetings, as resources, law and OSHA policy permit;
- Designate a safety and health specialist(s) experienced in working with the tower industry to
serve as a resource and liaison for partnership participants as resources allow. The designated
specialist is expected to participate on the PMT;
- In coordination with NATE, develop a limited access web page for participant’s use.
- Participate in and coordinate the Partnership Management Team.
VIII. EMPLOYEE/EMPLOYER RIGHTS AND RESPONSIBILITIES
This partnership does not preclude employees and/or employers from exercising any right provided
under the OSH Act, nor does it abrogate any responsibility to comply with rules and regulations
adopted pursuant to the Act.
IX. TERMINATION
This agreement will terminate on ________, which is three years from the date of the signing. If
either OSHA or NATE wishes to withdraw their participation prior to the established termination
date, the agreement will terminate upon receiving a written notice of the intent to withdraw from
either signatory.
For non-signatory participants of the strategic partnership, OSHA or NATE may terminate the
participant’s involvement at any time with written notice. Additionally, the participant may
withdraw their participation from the strategic Partnership at any time with a written notice of the
intent to withdraw to OSHA and NATE.
X. SIGNATURES
Don Doty
Chairman
National Association of Tower Erectors |
Edwin G. Foulke, Jr.
Assistant Secretary
Occupational Safety and Health Administration |
Patrick M. Howey
Executive Director
National Association of Tower Erectors |
|
Appendix A
Eligibility Criteria for Additional Participants |
Eligible tower owners, general contractors, and carriers are invited to join this Partnership.
Although such companies may or may not perform construction work on their towers using their own
employees, they shall assure that contractors performing work on their towers have implemented
effective safety and health management systems that address telecommunications tower hazards,
including 100 percent fall protection above 6’.
All participants will conduct safety and health audits for 10 percent of their work sites (or 24
total worksites, whichever is less), per year, and report the results of such audits to NATE, who
will then aggregate the data and submit to OSHA.
Owners and Carriers must meet the following criteria before becoming eligible
to participate in this Partnership:
- Implement a safety and health management system that meets the minimum requirements set by NATE,
modeled after OSHA’s 1989 Safety and Health Guidelines;
- Maintain towers in accordance with the Telecommunications Industries Association (TIA) tower
standard, TIA 222;
- Meet, at a minimum, the practices set forth in the NATE Tower Owner Safety Checklist (See
Appendix D);
- Ensure the presence of a competent person, responsible for safety and health activities, at each
tower covered under this Partnership. A competent person is defined as follows, taken from OSHA
standard 1926.450:
"’Competent person’ means one who is capable of identifying existing and predictable hazards in the
surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and
who has authorization to take prompt corrective measures to eliminate them."
A competent person must be present at all times on every site;
- Have no willful violations, or serious violations directly related to a fatal accident within the
last three years from the date of this agreement (based on national inspection history);
- Submit OSHA 300 logs for the previous three years to NATE; and
- Submit a letter of commitment, signed by management, ensuring all eligibility criteria has been met.
Contractors must meet the following criteria before becoming eligible to participate
in this Partnership:
- Implement a safety and health management system that meets the minimum requirements set by NATE,
modeled after OSHA’s 1989 Safety and Health Guidelines;
- Meet, at a minimum, the practices set forth in the NATE Qualified Contractor Evaluation Checklist
- Ensure the presence of a competent person at each tower covered under this Partnership. A
competent person, responsible for safety and health activities, is defined as follows, taken from
OSHA standard 1926.450:
"’Competent person’ means one who is capable of identifying existing and predictable hazards in the
surroundings or working conditions which are unsanitary, hazardous, or dangerous to employees, and
who has authorization to take prompt corrective measures to eliminate them."
A competent person must be present at all times on every site
- Have no willful violations, or serious violations directly related to a fatal accident within the
last three years from the date of this agreement (based on national inspection history);
- Submit OSHA 300 logs for the previous three years to NATE;
- Submit a letter of commitment, signed by management, ensuring all eligibility criteria has been
met; and
- Provide 100 percent fall protection over 6’.
Appendix B
Application Process |
Tower Erectors Application Process
Tower erection, service and maintenance companies can apply for participation in the NATE/OSHA
Partnership by submitting the attached application/agreement form, including the signature of the
company CEO and including necessary documents as listed, to the NATE office. Participation is
contingent upon NATE and OSHA approval. See attached Document B.
Owners, Carriers, and Contractors
Tower Owners, Carriers and General Contractors can participate in this partnership by filing
appropriate application form to be developed, contingent upon NATE and OSHA approval.
Appendix C
Participant Application |
Tower Erection and Maintenance Industry
Partnership Application/Agreement Form |
Submit to the National Association of Tower Erectors (NATE) by October 1, 2006 |
Contractor
Address
City, State, Zip
Telephone
Email |
________________________________________________________________________________
________________________________________________________________________________
________________________________________________________________________________
_________________________________________ Fax ___________________________________
________________________________________________________________________________ |
SIC Code: (Tower Erectors 1799 - Other codes may be used
if applicable.)
________ (Classification)
1. Supply injury and illness dada for the last three years from your OSHA 300 logs.
(include OSHA 300 logs with application/agreement and designate the number of hours)
|
|
2003 |
2004 |
2005 |
|
a. Number of fatality cases
|
_________ |
_________ |
_________ |
|
b. Total hours worked, or approximate number of employees
|
_________ |
_________ |
_________ |
|
c. Lost workday incidents
(also includes injury cases with restricted work)
|
_________ |
_________ |
_________ |
|
d. Incidents
(recordable injuries or illnesses without lost days)
SIC Code: _____________
|
_________ |
_________ |
_________ |
|
e. Experience Modification Rate
(from your insurance carrier)
SIC Code: _____________ |
_________ |
_________ |
_________ |
*In a situation where a company may be new or a company with less than ten employees that may not
have an OSHA 300 log, provide the injury and illness data you have, accompanied by a letter
explaining why you are not submitting OSHA logs.
2. Do you use the reference material NATE
recommends for safety and health?
|
□ Yes |
□ No |
3. Do you regularly attend NATE sponsored safety
seminars?
|
□ Yes |
□ No |
4. Do you hold weekly safety meetings?
|
□ Yes |
□ No |
5. Does your company have a written safety and
health program that meets or exceeds the NATE program?
|
□ Yes |
□ No |
6. Do you supply your employees with your
company's safety and health program?
|
□ Yes |
□ No |
7. Do you have on-site safety inspections?
|
□ Yes |
□ No |
- If yes, who conducts these inspection?
________________________________________________________
- Frequency of inspections? ___________________________________________________________________
- Written record maintained? __________________________________________________________________
|
8. Has your company had a willful violation or a
serious violation from OSHA, nationwide, directly related to a fatality within the past three (3)
years?
|
□ Yes |
□ No |
9. Does your company policy require your
supervisors and employees to be held accountable for following your safety and health programs
that meets or exceeds the OSHA rules and regulations?
|
□ Yes |
□ No |
10. Will you provide all supervisory personnel or
"competent persons" engaged in construction activities the OSHA 30-hour course that relates to the
tower communication industry or its equivalent within one year of signing this agreement?
|
□ Yes |
□ No |
11. Will you provide all non-supervisory
personnel engaged in construction activities the OSHA 10-hour course or its equivalent within one
year of signing this agreement?
|
□ Yes |
□ No |
12. Will you permit site verification audits to
assure OSHA Partners are adhering to the agreement? (Approximately 10% of participation NATE
members will be audited on an annual basis.)
|
□ Yes |
□ No |
13. Do you agree to have a competent person from
your company conduct safety audits on your jobsites and forward audits for 10% of your
projects to the NATE office via the NATE website on a quarterly basis? |
□ Yes |
□ No |
President or CEO (please print):
___________________________________________________________________
Signature: _____________________________________________________________________________________
Person Completing Application (please print):
________________________________________________________
Title: _________________________________________________________________________________________
Signature: ________________________________________________ Date: _______________________________
Each participating NATE member will be provided with partnership identification cards for on site
crew supervisory personnel. Please indicate how man I.D.
cards your company will require: ________
Note: In order for this document to be valid, the original copy of the
application/agreement must be mailed along with a copy of you OSHA 300 logs. Faxed copies will not
be accepted. Failure to meet any of the requirements of this agreement will result in your company
being removed from the Partnership. |
Please mail to: National Association of Tower Erectors
8 Second Street · Watertown, South Dakota 57201-3624 |
Appendix D
OSHA Inspection Checklist |
TELECOMMUNICATION TOWER INSPECTION CHECKLIST |
|
An effective safety and health program has been implemented on the
job site
|
|
A competent person, responsible for safety and health
activities, has been designated for onsite activities
|
|
100% Fall protection over 6’ training has been
completed for all exposed employees and written certification maintained:
|
|
- Each individual having received training has been personally identified
- The completion date for the training has been documented on each training record
- All employees’ training records are readily accessible for inspection purposes
|
|
Inspections of the following equipment are performed
every time put into use:
|
|
- All personal protective equipment
- Fall protection systems including fall restraint, arrest and positioning device systems
- All hand tools and electrical equipment
- Rigging equipment
- Tag lines
NOTE: It is recommended that a written validation of inspection be maintained at the job site and
that a tagging system be implemented for equipment taken out-of-service.
|
|
Location(s) where high-voltage lines and other
electrical hazards have been identified and marked
|
|
- Electrical service provider has been notified prior to the start of work (if needed)
- Site specific briefing notifying employees of identified hazards and means of
control/elimination has been performed
|
|
Emergency procedures have been determined and
implemented prior to the start of work
|
|
- Personnel trained in first-aid and CPR have been identified
- Site specific emergency rescue procedures have been developed and documented
- All applicable warning and danger signs have been posted and maintained on the job site
|
SAFETY REQUIREMENTS TO BE IMPLEMENTED WHEN RIDING THE LINE |
|
|
|
All hoist operators have been trained
|
|
- Written certification of training is maintained at the job site
|
|
Daily hoist inspections are performed and documented
|
|
Hoists shall be approved for personnel lifting
|
|
Inspection records are maintained at the job site or
are readily accessible
|
|
Load capacity charts and operating manuals are
maintained on the job site
|
|
Load capacity charts for gin poles are maintained on
the job site
|
|
Gin Poles shall be inspected before use by a
competent person to determine they are free from defects
|
|
A pre-lift meeting shall be held prior to the trial
lift at each location
|
|
- Documentation with signatures of attendees
- Meetings documentation contains a list of all points covered and hazards identified
- Meetings documentation is maintained on the job site
|
|
Daily inspections of radio communication devices are
performed, if in use
|
|
Anti-two blocking device or system is operational and
functioning properly
|
|
A trial lift is performed prior to placing personnel
on the line or in man baskets and repeated if the configuration changes that may cause a hazard
|
|
- Trial lifts are documented and the documentation is maintained on the job site
- All hoist system controls and safety devices are activated and functioning properly
- No interference with the lift exists
|
|
All identifying tags on personnel platforms are
posted and maintained
|
|
The hour meter is operational and functioning
properly
|
|
All exposed gears, belts, pulleys, projected screws,
set screws, chains, chain sprockets, and reciprocating and rotating parts are properly guarded
|
|
Hoist controls are clearly identified
|
|
- Each control is legibly marked
- All controls are within easy reach of the operator’s station
- Where applicable, over-speed prevention devices are used
|
|
All hoists are secured and properly anchored to
ensure hoisting safety |
Appendix E
Site Safety Audit Form |
NATE/OSHA Partnership
Site Safety Audit Form |
Company:
______________________________________________________________________________________
Site Location: __________________________________________________________________________________
Name of Competent Person on Site: ________________________________________________________________
Name of Person Conducting Audit: __________________________________________________________________
Customer: ______________________________________________________________________________________
Type of Structure: □ Monopole □ SST □ Guyed □ Rooftop □ Water □ Tank □
Other _______________________
Scope of Work: _________________________________________________________________________________
_______________________________________________________________________________________________
PART 1: JOB SITE DOCUMENTATION |
A. Was a Job Hazard Analysis conducted, form filled out and on
site? |
□ Yes □ No □ N/A |
B. Are the applicable safety signs posted? |
□ Yes □ No □ N/A |
C. Is there a competent person on site? |
□ Yes □ No □ N/A |
D. Is someone on site certified in First Aid / CPR / BBP? |
□ Yes □ No □ N/A |
E Has the emergency data for been filled out and posted? |
□ Yes □ No □ N/A |
F. Has a site-specific emergency rescue plan been developed and
documented? |
□ Yes □ No □ N/A |
G. Is there a documented procedure for any overhead electrical
hazards? |
□ Yes □ No □ N/A |
H. Are MSDS's available for the material being used on site?
|
□ Yes □ No □ N/A |
PART 2: JOB SITE
CONDITIONS (INCLUDE ENVIRONMENTALS) |
A. Is the work site clean of trash? |
□ Yes □ No □ N/A |
B. Are materials stored properly and orderly? |
□ Yes □ No □ N/A |
C. Are measures taken to prevent access by unauthorized personnel
to the site? |
□ Yes □ No □ N/A |
D. Are areas barricaded as required? |
□ Yes □ No □ N/A |
E. Is drinking water available? |
□ Yes □ No □ N/A |
F. Are chemical, flammable and combustible liquids stored
properly? (i.e. No plastic gas cans) |
□ Yes □ No □ N/A |
G. Are fire extinguisher of the appropriate size and type
available, and with current inspection tags? |
□ Yes □ No □ N/A |
H. Are plant and animal hazards addressed and documented?
|
□ Yes □ No □ N/A |
PART 3: PPE |
A. Are employees wearing hard hats? |
□ Yes □ No □ N/A |
B. Are employees wearing proper work boots? |
□ Yes □ No □ N/A |
C. are safety glasses being used? (if applicable) |
□ Yes □ No □ N/A |
D. Are employees wearing gloves? (if applicable) |
□ Yes □ No □ N/A |
E. Are employees dressed in appropriate work clothing? |
□ Yes □ No □ N/A |
F. Is hearing protection being used? (if applicable)
|
□ Yes □ No □ N/A |
PART 4: FALL
PROTECTION EQUIPMENT |
A. Do employees that are exposed to falls have documented
training? |
□ Yes □ No □ N/A |
B. Is fall protection equipment being inspected daily and
documented? |
□ Yes □ No □ N/A |
C. Are all Fall Protection equipment tags legible? |
□ Yes □ No □ N/A |
D. If the work being performed requires fall protection, is it
being used 100%? |
□ Yes □ No □ N/A |
E. Is the proper equipment on the site to complete the task?
|
□ Yes □ No □ N/A |
PART 5: RF |
A. Have RF hazards been considered (if applicable)? |
□ Yes □ No □ N/A |
B. Is there a procedure in place to reduce the RF exposure within
statutory limits?
(if applicable)
|
□ Yes □ No □ N/A |
PART 6: HOISTS |
A. Are daily inspections being completed with documentation on
site? |
□ Yes □ No □ N/A |
B. Is hoist operator qualified? (Certified through training or
qualified through experience) |
□ Yes □ No □ N/A |
C. Are load charts posted and readily available to hoist operator? |
□ Yes □ No □ N/A |
D. Is there an operator's manual for the unit on site? |
□ Yes □ No □ N/A |
E. Are headache ball markings legible? |
□ Yes □ No □ N/A |
F. Is end connection properly secured? |
□ Yes □ No □ N/A |
G. Are all hoists secured and properly anchored for the load
intended? |
□ Yes □ No □ N/A |
H. Are hoist controls clearly identified? |
□ Yes □ No □ N/A |
I. Are hoist controls easily accessible to the operator? |
□ Yes □ No □ N/A |
J. Is the hour meter operational and functioning properly? |
□ Yes □ No □ N/A |
K. Are to-way radios being tested daily, if being used? |
□ Yes □ No □ N/A |
L. Are all exposed moving parts properly guarded? |
□ Yes □ No □ N/A |
M. Is a hand signal chart posted and visible to all personnel on
site?
|
□ Yes □ No □ N/A |
PART 7: PERSONNEL
LIFTING |
A. Is the hoist approved for lifting personnel? |
□ Yes □ No □ N/A |
B. Has a pre-lift meeting been held, documented and made available
on the site? |
□ Yes □ No □ N/A |
C. In the pre-lift plan, was the trial lift completed and
documented? |
□ Yes □ No □ N/A |
D. If a personnel platform is on site, does it have an
identification plate with the proper data in place? (Proper data includes: weight of the platform,
maximum intended load, and employee capacity) |
□ Yes □ No □ N/A |
E. If a gin pole is being used, does it have a load chart?
|
□ Yes □ No □ N/A |
PART 8: RIGGING &
BLOCKS |
A. Are proper rigging practices being utilized? |
□ Yes □ No □ N/A |
B. Is rigging equipment in good condition? |
□ Yes □ No □ N/A |
C. Are the tags on synthetic slings legible? |
□ Yes □ No □ N/A |
D. Is rigging equipment being inspected daily and the inspection
documented? |
□ Yes □ No □ N/A |
E. Are tag lines in good condition?
|
□ Yes □ No □ N/A |
PART 9: GIN POLES |
A. Is gin pole rigging in good condition? (If visible) |
□ Yes □ No □ N/A |
B. Des the gin pole have an identification tag? (If visible) |
□ Yes □ No □ N/A |
C. Is the gin pole pre-job inspection form filled out and site or
readily available? |
□ Yes □ No □ N/A |
D. Does the sheave in the Rooster Head match the wire rope? (If
visible)
|
□ Yes □ No □ N/A |
PART 10: LADDERS |
A. Are units well maintained and in good working order? |
□ Yes □ No □ N/A |
B. Are ladders at the proper slope? (4:1 ratio) |
□ Yes □ No □ N/A |
C. Does the ladder extend 36 inches past the landing? |
□ Yes □ No □ N/A |
D. Is the ladder stable, on good ground? |
□ Yes □ No □ N/A |
E. Is the ladder set up correctly? |
□ Yes □ No □ N/A |
PART 11: COMMENTS |
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________ |
PART 12: OVERALL
IMPRESSION OF VISIT |
□ OUTSTANDING
□ ABOVE AVERAGE
□ AVERAGE
□ BELOW AVERAGE
Amount of time spent on this visit: ___________ HOURS ____________ DAYS
Necessary to follow up with written documentation?
|
□ Yes □ No |
If any deficiencies, were they corrected immediately? |
□ Yes □ No □ N/A |
Comments:
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
_______________________________________________________________________________________________
This report was reviewed with: |
□ Supervisor □ Crew |
Supervisor Signature ____________________________________________________ Date _____________________
DIRECTOR DEFICIENCY COMPLIANCE REPORT |
ITEM # ________ Compliance Completed By: _______________________________________ Date:
_____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
ITEM # ________ Compliance Completed By: _______________________________________ Date: _____________
Noted Deficiency: ________________________________________________________________________________
Course of Action: ________________________________________________________________________________
By submitting this form to the NATE office the auditing official affirms that all deficiencies have
been brought into compliance.
Auditing Official's Signature: ____________________________________________________ Date:
_____________
|