CDC logoSafer Healthier People  CDC HomeCDC SearchCDC Health Topics A-Z
NIOSH - National Institute for Occupational Safety and Health

Skip navigation links Search NIOSH  |  NIOSH Home  |  NIOSH Topics  |  Site Index  |  Databases and Information Resources  |  NIOSH Products  |  Contact Us

 NIOSH Publication No. 2004-146

Worker Health Chartbook 2004

Index
<< Back to Previous Page

You searched for: machine, machinery, machines

Click on Image for Larger View.

1chart thumbnail - click on image for larger view.Figure 1-34 Occupations with the highest median days away from work due to occupational injuries or illnesses in private industry, 2001. Among the occupations with at least 0.5% of the total cases involving days away from work, bus drivers had a median of 11 days. Truck drivers; plumbers, pipefitters, and steamfitters; and industrial machinery repairers each had a median of 10 days. The median number of days away from work was 6 for all cases in 2001. (Source: BLS [2003c].)

 
2chart thumbnail - click on image for larger view.Figure 1-40 Distribution of occupational injury and illness cases with days away from work in private industry by source of injury or illness, 2001. Together, four sources accounted for more than half of all nonfatal occupational injuries and illnesses with days away from work: floors, walkways, ground surfaces (17.2%); worker motion or position (16%); containers (13.6%); and parts and materials (10.6%). (Source: BLS [2003c].)

 
3chart thumbnail - click on image for larger view.Figure 2-23 Annual rates of fatal occupational injuries by leading cause, 1980-1998. (All data for 1998 exclude New York State.) During 1980-1998, fatal occupational injury rates declined for the six leading causes of death, though not always consistently. During this period, deaths due to motor vehicle incidents had the highest rates. Deaths due to machines had the second highest rate until 1990, when they were surpassed by deaths due to homicides. For 1998, the rates of death for homicides and falls were second highest, followed closely by the rate for machine-related deaths. (Source: NIOSH [2001].)

 
4chart thumbnail - click on image for larger view.Figure 3-6 Leading sources of fatal occupational injuries in the agriculture, forestry, and fishing industry, 1992-2001. (Fatality data exclude New York City.) Farm tractors accounted for 2,165 fatal occupational injuries during 1992-2001 and were the leading source of these deaths in agriculture, forestry, and fishing. Trucks and fishing boats were also major sources of death in this industry and accounted for 795 and 434 fatal occupational injuries, respectively. (Sources: BLS [2002a]; Myers [2003].)

 
5chart thumbnail - click on image for larger view.Figure 3-7 Leading causes of fatal occupational injuries in the agriculture, forestry, and fishing industry, 1992-1997. During 1992-1997, machinery caused 1,021 fatal occupational injuries and was the leading cause of these deaths in agriculture, forestry, and fishing as reported on death certificates. The next leading causes of these deaths were motor vehicles (624 fatalities) and falls (235 fatalities). (Sources: NIOSH [2001a]; Myers [2001a].)

 
6chart thumbnail - click on image for larger view.Figure 3-11 Unintentional on-farm deaths of youths under age 20 by cause of death, 1982-1996. During 1982-1996, unintentional on-farm deaths of youths under age 20 most frequently involved machinery (773 fatalities), drowning (585 fatalities), or firearms (237 fatalities). (Sources: NCHS [2002]; Adekoya and Pratt [2001].)

 
7chart thumbnail - click on image for larger view.Figure 3-19 Number of nonfatal occupational farming injuries by leading sources of injury, 1993-1995. Nonfatal occupational farming injuries were primarily caused by machinery and livestock during 1993-1995. Other major sources of injury included working surfaces and hand tools. (Sources: NIOSH [2001b]; Myers [2001c].)

 
8chart thumbnail - click on image for larger view.Figure 4-7 Number and distribution of fatal mining injuries by type of incident and work location, 1998-2002. During 1998-2002, most fatal injuries to miners working at surface mining locations (61.2%) were associated with the use of powered haulage (such as motors and rail cars, conveyors, bucket elevators, vertical manlifts, shuttle cars, haulage trucks, and front-end loaders) and machinery (for example, electric and air-powered tools and mining machinery such as drills, draglines, power shovels, and loading machines). Most fatal mining injuries underground (43.3%) were classified as fall of ground (that is, fall of roof or back). (Sources: MSHA [2003]; NIOSH [2003a].)

 
9chart thumbnail - click on image for larger view.Figure 4-11 Rate of lost-workday injuries by type of incident and work location, 1998-2002. During 1998-2002, miners at underground locations generally had higher nonfatal injury rates than those working on the surface. Injuries to miners at both surface and underground locations were most frequently associated with handling materials and slip or fall of person. Miners working underground also had relatively high rates of injury from fall of ground incidents (caving rock), or in incidents involving powered haulage or machinery. (Sources: MSHA [2003]; NIOSH [2003a].)

 
10chart thumbnail - click on image for larger view.Figure 4-14 Median number of lost workdays due to nonfatal lost-time mining injuries by work location and selected types of incidents, 1998-2002. During 1998-2002, the median number of lost workdays due to nonfatal lost-time mining injuries was 21 for miners injured underground and 14 for miners injured at surface locations. At surface locations, falls of ground (e.g., rock dislodging from a highwall) accounted for the highest median number of lost workdays. At underground locations, powered haulage and slip or fall of person accounted for the highest median number of lost workdays. (Sources: MSHA [2003]; NIOSH [2003a].)

 

left arrowBack