> > | |||||||||||||||||||||||||||||||||||||||
Arkansas Nuclear One Power Plant, Arkansas |
|||||||||||||||||||||||||||||||||||||||
Update: August 29, 2008
Next Update: September 2009 Arkansas Nuclear One Generating Station Net Generation and Capacity, 2007
Description: Arkansas Nuclear One (ANO) power plant actually contains two nuclear reactors (the second reactor designated Arkansas Nuclear One unit 2 or ANO-2). The plant is located on a 1,100-acre site in Pope County. In 1967, it was selected as the best site among four candidates. In addition to the easy access to water and availability of rail and highway transportation, the geology was a key factor in its selection. "Below the 20 feet of clay at the site surface is a 150-ft layer of shale and rock which reduced site foundation work to a minimum." 1 Arkansas Nuclear One Unit 1
Arkansas Nuclear One Unit 2
Containment: According to the U.S. Nuclear Regulatory Commission, both reactors are PWR and containment is dry, ambient pressure 2 type. Pressurized-Water Reactor (PWR) In a typical commercial pressurized light-water reactor (1) the reactor core generates heat, (2) pressurized-water in the primary coolant loop carries the heat to the steam generator, (3) inside the steam generator heat from the primary coolant loop vaporizes the water in a secondary loop producing steam, (4) the steam line directs the steam to the main turbine causing it to turn the turbine generator, which produces electricity. The unused steam is exhausted to the condenser where it is condensed into water. The resulting water is pumped out of the condenser with a series of pumps, reheated, and pumped back to the steam generator. The reactors core contains fuel assemblies which are cooled by water, which is force-circulated by electrically powered pumps. Emergency cooling water is supplied by other pumps, which can be powered by onsite diesel generators. Other safety systems, such as the containment cooling system, also need power.
_________________________________________ Sources for Data in the Table: Capacity, for purposes of this report, is the net summer capability as reported in Energy Information Administration (EIA) Form EIA-860, "Annual Electric Generator Report." Capacity Factor is a percentage calculation in which the maximum possible generation (based on net summer capability) is divided into the actual generation then multiplied by 100. Generation is the net electricity output reported by plant owners on Form EIA-906, “Power Plant Report.” Type of Unit: All U.S. commercial reactors currently in operation are one of two types: BWR (boiling water reactor) or PWR (pressurized light water reactor). The type, on-line date, and the license expiration date are published annually in Information Digest by the U.S. Nuclear Regulatory Commission. |
see also:
annual
nuclear statistics back to 1953
projected
electricity capacity to 2025
international
electricity statistics