[Federal Register: August 11, 1999 (Volume 64, Number 154)] [Notices] [Page 43812-43813] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr11au99-167] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration [Docket No. NHTSA-99-6062] Notice of Receipt of Petition for Decision That Nonconforming 1996 Toyota RAV4 Multi-Purpose Passenger Vehicles Are Eligible for Importation AGENCY: National Highway Traffic Safety Administration, DOT. ACTION: Notice of receipt of petition for decision that nonconforming 1996 Toyota RAV4 multi-purpose passenger vehicles (MPVs) are eligible for importation. ----------------------------------------------------------------------- SUMMARY: This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 1996 Toyota RAV4 MPVs that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards are eligible for importation into the United States because (1) they are substantially similar to vehicles that were originally manufactured for importation into and sale in the United States and that were certified by their manufacturer as complying with the safety standards, and (2) they are capable of being readily altered to conform to the standards. DATES: The closing date for comments on the petition is September 10, 1999. ADDRESSES: Comments should refer to the docket number and notice number, and be submitted to: Docket Management, Room PL-401, 400 Seventh St., SW, Washington, DC 20590. [Docket hours are from 9 am to 5 pm]. FOR FURTHER INFORMATION CONTACT: George Entwistle, Office of Vehicle Safety Compliance, NHTSA (202-366-5306). SUPPLEMENTARY INFORMATION: Background Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not originally manufactured to conform to all applicable Federal motor vehicle safety standards shall be refused admission into the United States unless NHTSA has decided that the motor vehicle is substantially similar to a motor vehicle originally manufactured for importation into and sale in the United States, certified under 49 U.S.C. 30115, and of the same model year as the model of the motor vehicle to be compared, and is capable of being readily altered to conform to all applicable Federal motor vehicle safety standards. Petitions for eligibility decisions may be submitted by either manufacturers or importers who have registered with NHTSA pursuant to 49 CFR Part 592. As specified in 49 CFR 593.7, NHTSA publishes notice in the Federal Register of each petition that it receives, and affords interested persons an opportunity to comment on the petition. At the close of the comment period, NHTSA decides, on the basis of the petition and any comments that it has received, whether the vehicle is eligible for importation. The agency then publishes this decision in the Federal Register. Wallace Environmental Testing Laboratories, Inc. of Houston, Texas (``Wallace'') (Registered Importer 90-005) has petitioned NHTSA to decide whether a 1996 Toyota RAV4 MPV that was manufactured for European and other foreign markets is eligible for importation into the United States. The vehicle which Wallace believes is substantially similar is the 1996 Toyota RAV4 MPV that was manufactured for importation into and sale in the United States and certified by its manufacturer, Toyota Motor Corporation, as conforming to all applicable Federal motor vehicle safety standards. The petitioner claims that it carefully compared the non-U.S. certified 1996 Toyota RAV4 MPV to its U.S. certified counterpart, and found the two vehicles to be substantially similar with respect to compliance with most Federal motor vehicle safety standards. Wallace submitted information with its petition intended to demonstrate that the non-U.S. certified 1996 Toyota RAV4 MPV, as originally manufactured, conforms to many Federal motor vehicle safety standards in the same manner as its U.S. certified counterpart, or is capable of being readily altered to conform to those standards. Specifically, the petitioner claims that the non-U.S. certified 1996 Toyota RAV4 MPV is identical to its U.S. certified counterpart with respect to compliance with Standards Nos. 102 Transmission Shift Lever Sequence * * *, 103 Defrosting and Defogging Systems, 104 Windshield Wiping and Washing Systems, 105 Hydraulic Brake Systems, 106 Brake Hoses, 113 Hood Latch Systems, 114 Theft Protection, 116 Brake Fluid, 119 New Pneumatic Tires for Vehicles other than Passenger [[Page 43813]] Cars, 124 Accelerator Control Systems, 201 Occupant Protection in Interior Impact, 202 Head Restraints, 204 Steering Control Rearward Displacement, 205 Glazing Materials, 206 Door Locks and Door Retention Components, 207 Seating Systems, 209 Seat Belt Assemblies, 210 Seat Belt Assembly Anchorages, 212 Windshield Retention, 214 Side Impact Protection, 216 Roof Crush Resistance, 219 Windshield Zone Intrusion, and 302 Flammability of Interior Materials. Petitioner also contends that the vehicles are capable of being readily altered to meet the following standards, in the manner indicated: Standard No. 101 Controls and Displays: (a) inscription of the word ``Brake'' on the brake failure indicator lamp lens; (b) replacement of the speedometer/odometer with a unit calibrated in miles per hour. Standard No. 108 Lamps, Reflective Devices and Associated Equipment: (a) installation of U.S.-model headlamp assemblies; (b) installation of U.S.-model rear sidemarker assemblies; (c) installation of a high mounted stop lamp. Standard No. 111 Rearview Mirror: inscription of the required warning statement in the passenger side rearview mirror. Standard No. 120 Tire Selection and Rims for Motor Vehicles other than Passenger Cars: installation of a tire information placard. Standard No. 208 Occupant Crash Protection: (a) installation of a seat belt warning lamp and buzzer; (b) replacement of the driver's and passenger's side air bags and knee bolsters with U.S.-model components on vehicles that are not already so equipped. The petitioner states that the vehicle is equipped with Type 2 seat belts at the front and rear outboard seating positions. 301 Fuel System Integrity: installation of a rollover valve in the fuel tank vent line between the fuel tank and the evaporative emissions collection canister. Additionally, the petitioner states that U.S.-model components must be added to the non-U.S. certified 1996 Toyota RAV4 MPV so that it complies with the Bumper Standard found in 49 CFR Part 581. The petitioner also states that a vehicle identification number plate must be affixed to the vehicles to meet the requirements of 49 CFR Part 565. Interested persons are invited to submit comments on the petition described above. Comments should refer to the docket number and be submitted to: Docket Management, Room PL-401, 400 Seventh St., SW, Washington, DC 20590. [Docket hours are from 9 am to 5 pm]. It is requested but not required that 10 copies be submitted. All comments received before the close of business on the closing date indicated above will be considered, and will be available for examination in the docket at the above address both before and after that date. To the extent possible, comments filed after the closing date will also be considered. Notice of final action on the petition will be published in the Federal Register pursuant to the authority indicated below. Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; delegations of authority at 49 CFR 1.50 and 501.8. Marilynne Jacobs, Director, Office of Vehicle Safety Compliance. [FR Doc. 99-20733 Filed 8-10-99; 8:45 am] BILLING CODE 4910-59-P