[Federal Register: January 12, 1999 (Volume 64, Number 7)]
[Notices]               
[Page 1826-1827]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr12ja99-92]

-----------------------------------------------------------------------

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION

[Notice 99-007]

 
Government-Owned Inventions, Available for Licensing

AGENCY: National Aeronautics and Space Administration.

ACTION: Notice of Availability of Inventions for Licensing.

-----------------------------------------------------------------------

SUMMARY: The inventions listed below are assigned to the National 
Aeronautics and Space Administration, have been filed in the United 
States Patent and Trademark Office, and are available for licensing.

DATES: January 12, 1999.

FOR FURTHER INFORMATION CONTACT: Robert L. Broad, Jr., Patent Counsel, 
Marshall Space Flight Center, Mail Stop CC01, Huntsville, AL 35812; 
telephone (256) 544-0021.
    NASA Case No. MFS-31205-1: Injector For Liquid Fueled Rocket 
Engine;
    NASA Case No. MFS-31176-1: Rotational--Translational Fourier 
Imaging System;
    NASA Case No. MFS-30125-1: Friction Stir Weld (FSW) System For 
Welding And Weld Repair;
    NASA Case No. MFS-31377-1CU: Low-Temperature, Controllable-Stress 
Electroplating Of Ultra-High-Strength Glassy Metals;
    NASA Case No. MFS-31186-1: Power Divider For Harmonically Rich 
Waveforms;
    NASA Case No. MFS-31270-1: Load Transfer Mechanism For a Turbine 
Disk;
    NASA Case No. MFS-31284-1: Fabrication of Bulk High Temperature 
Superconductors Using Ba(NO3)2 In The Precursors Mixture;
    NASA Case No. MFS-31238-1: Position Sensor With Integrated Signal-
Conditioning Electronics On A Printed Wiring Board;
    NASA Case No. MFS-31237-1: Resolver To 360 Degree Linear Analog 
Converter & Method;
    NASA Case No. MFS-31219-1: Arc-Tangent Circuit For Continuous 
Linear Output;
    NASA Case No. MFS-31218-1: Non-Contact Linear Actuator Position 
Sensor & Controller Insensitive To Air Gap Between Armature & Magnetic 
Bracket;
    NASA Case No. MFS-31146-1: Passive Capture Joint With 3 Degrees Of 
Freedom;
    NASA Case No. MFS-31376-1: Advanced Composite Baseball/Softball Bat 
(Two Piece);
    NASA Case No. MFS-31208-1: Advanced Composite Baseball/Softball Bat 
(One Piece);

[[Page 1827]]

    NASA Case No. MFS-31258-1: Releasable Roller Clutch;
    NASA Case No. MFS-31278-1: Synchronized Docking System;
    NASA Case No. MFS-31279-1: Synchronized Autonomous Docking System;
    NASA Case No. MFS-31281-1: Self-Synchronized Target Subsystem For 
Automated Docking Systems;
    NASA Case No. MFS-31249-1: Method Of Determining The Inhomogeneity 
Of A High TC Superconductor;
    NASA Case No. MFS-31138-1: Rocket Engine Thrust Chamber Assembly;
    NASA Case No. MFS-31269-1: Orbital Friction Stir Weld System;
    NASA Case No. MFS-31184-1: Pressure-Driven Magnetically-Coupled 
Conveyance;
    NASA Case No. MFS-31294-2: Aluminum Alloy And Articles Cast 
Therefrom;
    NASA Case No. MFS-31379-1: Composite Tank;
    NASA Case No. MFS-31267-1SB: Gradient Coatings;
    NASA Case No. MFS-31043-1: Non-Contact, Capacitance Based Method 
System For Symbol Recognition;
    NASA Case No. MFS-31044-1: Radiographic Based Method and System For 
Identifying Manufactured Assemblies;
    NASA Case No. MFS-31075-1: Thermal Imaging Based Method and System 
for Symbol Recognition.

    Dated: January 5, 1999.
Edward A. Frankle,
General Counsel.
[FR Doc. 99-572 Filed 1-11-99; 8:45 am]
BILLING CODE 7510-01-P