[Federal Register: July 12, 2002 (Volume 67, Number 134)]
[Notices]               
[Page 46240-46241]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr12jy02-97]                         

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

 
Proposed Technical Standard Order--TSO-C39c, Aircraft Seats and 
Berths

AGENCY: Federal Aviation Administration, DOT.

ACTION: Notice of availability and requests for public comments.

-----------------------------------------------------------------------

SUMMARY: This notice announces the availability of and request comments 
on a proposed Technical Standard Order (TSO) C39c, Aircraft Seats and 
Berths. The proposed TSO-C39c, Aircraft Seats and Berths, prescribes 
the minimum performance standard (MPS) that a aircraft seat and berth 
must meet in order to bear the TSO number on its identification plate. 
Proposed TSO-C39c provides standards for seating systems in transport, 
rotorcraft, normal and utility airplanes, and acrobatic.

DATES: Comments must be received on or before September 15, 2002.

ADDRESSES: Send all comments on the proposed technical standard order 
to: Federal Aviation Administration, Aircraft Certification Service, 
Aircraft Engineering Division, Technical Programs and Continued 
Airworthiness Branch, AIR-120, ATTN: Bobbie J. Smith, Room 815, 800 
Independence Avenue, SW., Washington, DC 20591. Or, deliver comments 
to: Federal Aviation Administration, Room 815, 800 Independence Avenue, 
SW., Washington, DC 20591.

FOR FURTHER INFORMATION CONTACT: Ms. Bobbie J. Smith, AIR-120, Aircraft 
Certification Service, Aircraft Engineering Division, Federal Aviation 
Administration, 800 Independence Avenue, SW., Washington, DC 20591, 
Telephone 202-267-9546.

SUPPLEMENTARY INFORMATION:

Comment Invited

    Interested persons are invited to comment on the proposed TSO 
listed in this notice by submitting such written data, views, or 
arguments as they desire to the above specified address. Comments 
received on the proposed TSO may be examined, before and after the 
comment closing date, in Room 815, FAA Headquarters Building (FOB-10A), 
800 Independence Avenue, SW., Washington, DC 20591, weekdays except 
Federal holidays, between 8:30 a.m. and 4:30 p.m. All communications 
received on or before the closing date for comments specified above 
will be considered by the Director of the Aircraft Certification 
Service before issuing the final TSO.

Background

    This TSO is proposed to provide minimum performance standards for 
aircraft seats and berths.
    TSO-C39 was originally developed to provide a standard that would 
serve as a basis for FAA approval to meet the emergency landing loads 
specified in the airworthiness requirements. Specifically TSO-C39 
replaced TSO-C25 as the seat standards when the certification basis for 
aircraft changed from including a forward crash load of 6g's to 9g's.
    TSO-C39 incorporated NAS 809 to provide the criteria that cold be 
used to demonstrate the strength of aircraft seats to the 9g-standard. 
In 1988, a new requirement for seat strength and performance, commonly 
called the 16g rule, was promulgated in the Federal Aviation 
Regulation. The 16g rule was fundamentally different from previous 
emergency landing conditions as it

[[Page 46241]]

included dynamic testing of the seat and occupant protection criteria.
    The SAE SEAT Committee was tasked with developing a standard that 
would provide a basis for meeting the 16g rule. SAE published AS 8049, 
that was incorporated into TSO-C127 in 1992. TSO-C127a was issued in 
1998 after AS 8049A was published to further refine the dynamic seat 
standard. AS 8049 and AS 8049A contained the criteria for dynamic seats 
and still included criteria for static strength and design 
requirements.
    Although seats were still being produced to the static 9g-standard 
in TSO-C39, the seat industry began to increase its production of TSO-
C127 and TSO-C127a seats. So there were then, and currently still are, 
two standards--NAS 809 and AS8049--that addressed static 9g 
requirements.
    In 2000, the FAA and industry formed a team to investigate and 
implement ways to streamline seat certification. This group recognized 
that two different standards addressing static strength and design 
considerations for seats was making the certification process more 
complicated than it needed to be. Therefore it was proposed that a new 
revision to TSO-C39 be issued to standardize the state criteria portion 
of the two standards.
    It was decided that this could be successfully accomplished by 
referencing the static portion of AS 8049A for the proposed revision to 
TSO-C39. This will bring TSO-C39 in alignment with TSO-C127 and reflect 
the way industry currently uses the two standards. Most seat 
manufacturers are already using the static portion of AS 8049A as a 
basis for meeting airworthiness requirements not covered by the 
criteria in TSO-C39. Including the assessment under the TSO program 
will improve certification schedules. Additionally, AS 8049A continues 
to be reviewed and updated, and changes to AS 8049 will cover TSO-C127 
seats as well as TSO-C39 seats.

How To Obtain Copies

    A copy of the proposed TSO may be obtained via the information 
contained in section titled FOR FURTHER INFORMATION CONTACT, or the 
Internet at http://www.faa.gov/certification/aircraft/TSOA.htm.

    Issued in Washington, DC on July 8, 2002.
David Hempe,
Manager, Aircraft Engineering Division Aircraft Certification Service.
[FR Doc. 02-17576 Filed 7-11-02; 8:45 am]
BILLING CODE 4910-13-M