[Federal Register: April 17, 2002 (Volume 67, Number 74)]
[Rules and Regulations]
[Page 18822-18824]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr17ap02-11]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Mine Safety and Health Administration
30 CFR Part 75
RIN 1219-AA75
High-Voltage Longwall Equipment Standards for Underground Coal
Mines; Correction
AGENCY: Mine Safety and Health Administration (MSHA), Labor.
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: This corrects the Mine Safety and Health Administration's
final rule establishing new mandatory standards for the design,
installation, use, and maintenance of high-voltage longwall mining
systems used in underground coal mines published March 11, 2002.
DATES: Effective on May 10, 2002.
[[Page 18823]]
FOR FURTHER INFORMATION CONTACT: Marvin W. Nichols, Jr., Director,
Office of Standards, Regulations and Variances, MSHA, 4015 Wilson
Boulevard, Arlington, Virginia 22203-1984. Mr. Nichols can be reached
at nichols-marvin@msha.gov (Internet E-mail), 703-235-1910 (voice), or
703-235-5551 (fax). The Correction also is available on the Internet at
http://www.msha.gov/REGSINFO.HTM.
SUPPLEMENTARY INFORMATION: On March 11, 2002, the Mine Safety and
Health Administration published a final rule (67 FR 10972) revising our
electrical safety standards for underground coal mines. This document
corrects the final rule by adding the heading for Appendix A to Subpart
I and corrects the placement of the appendix.
Dated: April 12, 2002.
Marvin W. Nichols, Jr.,
Director, Office of Standards, Regulations and Variances.
In the Federal Register of March 11, 2002, the illustration that
appears on page 11005 should be corrected to read as set forth below
and moved to appear immediately after Sec. 75.822 on page 11003.
BILLING CODE 4510-43-P
[[Page 18824]]
[GRAPHIC] [TIFF OMITTED] TR17AP02.030
[FR Doc. 02-9298 Filed 4-16-02; 8:45 am]
BILLING CODE 4510-43-C