[Federal Register: March 8, 2000 (Volume 65, Number 46)]
[Notices]               
[Page 12314-12315]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr08mr00-120]                         

=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

 
Proposed Advisory Circular 21-23A, Airworthiness Certification of 
Civil Aircraft, Engines, Propellers, and Related Products Imported to 
the United States

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of availability and request for comments.

-----------------------------------------------------------------------

SUMMARY: This document announces the availability of and requests 
comment on a proposed revised advisory circular (AC) that provides 
information on the Federal Aviation's (FAA) objectives, regulations, 
and general practices for United States of America (U.S.) airworthiness 
certification or acceptance of civil aeronautical products imported to 
the U.S. This notice is necessary to give all interested persons an 
opportunity to present their views on the proposed AC.

DATES: Comments must be received no later than May 8, 2000.

ADDRESSES: Send all comments on the proposed AC to: Federal Aviation 
Administration (FAA), Attention: Marilyn DonCarlos, International 
Airworthiness Program, AIR-4, Aircraft Certification Service, 800 
Independence Avenue S.W., Washington, DC 20591. Comments may be 
inspected at the above address between 8:30 a.m. and 4:00 p.m. 
weekdays, except Federal holidays.

FOR FURTHER INFORMATION CONTACT: Marilyn DonCarlos, International 
Airworthiness Program Staff, AIR-4, Aircraft Certification Service, 
Federal Aviation Administration, 800 Independence Ave., S.W., 
Washington, DC 20591: telephone (202) 267-3319; fax (202) 267-3319; e-
mail marilyn.doncarlos@faa.gov.

SUPPLEMENTARY INFORMATION:

Comments Invited

    Interested persons are invited to comment on the proposed AC by 
submitting such written data, views, or arguments as they may desire. 
Commenters must identify the AC by title and submit comments in 
duplicate to the address specified above. The Aircraft Certification 
Service will consider all communications received on or before the 
closing date for comments before issuing the final AC.

Availability of Proposed AC

    Requests for copies should be directed to the person named above 
under the

[[Page 12315]]

caption FOR FURTHER INFORMATION CONTACT. Please specify whether a paper 
copy or an e-mailed copy is needed.

Discussion

    The proposed revisions to the advisory circular (AC) provide a 
convenient source of current policies, guidance, and practices for U.S. 
airworthiness certification and acceptance of civil aeronautical 
products imported to the U.S. Since the publication of current AC 21-23 
in 1987, a new format of bilateral aviation agreement, the Bilateral 
Aviation Safety Agreement (BASA), has been established. A BASA consists 
of an Executive Agreement, signed by the Department of State and its 
foreign counterpart, and one or more Implementation Procedures (e.g., 
for airworthiness, maintenance, flight simulators, environmental 
approval) signed by the FAA and its foreign civil aviation counterpart. 
Both a BASA and its predecessor, a Bilateral Airworthiness Agreement 
(BAA), are intended to facilitate reciprocal airworthiness 
certification of civil aeronautical products imported or exported 
between the two signatory countries. Both are based on a high degree of 
mutual confidence in the technical competence and regulatory capability 
of the aviation authority of the exporting country for performing 
aircraft certification functions within the scope of the agreements, 
but a BASA is more flexible, because if allows for later expansion into 
other FAA regulatory disciplines. The FAA's objective in issuing this 
proposed revised AC is to provide guidance on the current procedures 
and requirements for design and airworthiness approvals of aviation 
products imported to the United States, including requirements in BASA 
Implementation Procedures for Airworthiness.

    Issued in Washington, DC, on March 3, 2000.
Mary Cheston,
Manager, International Airworthiness Programs Staff, AIR-4.
[FR Doc. 00-5599 Filed 3-7-00; 8:45 am]
BILLING CODE 4910-13-M