Protecting People and the EnvironmentUNITED STATES NUCLEAR REGULATORY COMMISSION
ACCESSION #: 9610160180
Information & Support Services
P.O. Box 3707
Seattle, WA 98124-2207
October 3, 1996
G-1151-SJA-96-615
Document Control Desk
United States Nuclear Regulatory Commission
Washington, D.C. 20555
BOEING
Reference: a) Boeing Letter G-1151-RSO-92-365 dated August 31, 1992; R.
S. Orr to the NRC Operations Center
b) NRC Letter Docket No. 99901227 dated August 12, 1992; L.
J. Norrholm to R. S. Orr; Subject: Response to 10 CFR 21
Inquiry
Dear Sir or Madam:
In accordance with the reference correspondence and 10 CFR 21, Boeing is
sending the NRC the attached error notice(s) received from our former
software suppliers. Because of unknown current addresses, the following
former customers were not notified:
Reactor Controls, Inc.
Echo Energy Consultants, Inc.
Nuclear Applications and Systems Analysis Company (Japan)
Nuclear Power Services
Tenera Engineering Services
Gibbs & Hill, Inc.
Holtec International*_/
Error notices have been sent to our other former customers.
_________________________
*_/ Please note: GTSTRUDL Program Report Form 96.20 has been returned to
Boeing by the Post Office as undeliverable. Our efforts to obtain a
current mailing address for Holtec International have been unsuccessful.
_________________________
Very truly yours,
Sandra J. Andrews
Nuclear Administrator
Phone: (206) 865-6248
FAX (206) 865-4851
15004 Mail Stop: 7A-33, or
e-mail: Sandra.Andrews@PSS.Boeing.com
Enclosure(s): GTSTRUDL Program Report Form No. 96.21
Georgia Tech Computer Aided Structural Engineering Center
Georgia institute of Technology
School of Civil & Environmental Engineering
Atlanta, Georgia 30332-0355
USA
404 o 894 o 2260
404 o 894 o 8014 FAX
September 23, 1996
Attention: Nuclear Administrator
Boeing Information & Support Services
P.O.Box 24346, M/S 7A-33
Seattle, Washington 98124-0346
RE: GT STRUDL
Dear Sir or Madam:
Enclosed please find copies of GTSTRUDL PROGRAM REPORT FORM No. 96.21
and a VENDOR ACKNOWLEDGMENT FORM. Please sign and return the VENDOR AC-
KNOWLEDGMENT FORM to acknowledge receipt of the GTSTRUDL Program Report.
Thank you for reviewing the Program Report and for returning the
Acknowledgment Form.
Best regards,
CASE Center
Lawrence F. Kahn
Director of Professional Services
CL/tlk
Enclosures
An Equal Education and Employment Opportunity Institution
A Unit of the University System of Georgia
GTSTRUDL Program Report Form
GPRF No.:
DATE:
FROM: Computer-Aided Structural Engineering Center
Georgia Institute of Technology
Atlanta, Georgia 30332-0355
SEVERITY LEVEL:
X URGENT Problem results in incorrect answers which may not be
apparent or job aborts and cannot be recovered within the
session or job.
_ SERIOUS Problem results in incorrect answers which are obvious or
problem prevents completion of a particular user's task.
_ MINOR Problem can be worked around or problem poses high
frustration factor.
_ INFORMATIVE Documentation error, program usage tip, user
inconveniences.
Date Problem Confirmed
Date Notification Sent
Computers All
Operating System All
Version 93.01 and later
Target Release for Correction 96.02
Mgr. ASD
Signature Title
R & D Division
Michael H. Swanger
Typed or Printed Name Date of Signature
Signature Title
Professional Services Division
Typed or Printed Name Date of Signature Rev. 2.2
GTSTRUDL Program Report Form
(Continued)
GPRF No.:
DATE:
DESCRIPTION:
The LIST MAXIMUM REACTIONS command may abort or produce incorrect results
if active length and force units are specified to be other than INCHES
and POUNDS respectively. This problem may be avoided by specifying the
UNITS INCHES POUNDS command prior to giving the LIST MAXIMUM REACTIONS
command:
UNITS INCHES POUNDS
LIST MAXIMUM REACTIONS ...
Applicable sections of the User's Manual:
LIST MAXIMUM REACTION Command Section 2.1.14.4.2, Volume 1, Rev. N
Input/Output Units Specification Section 2.1.2.6, Volume 1
Rev. 2.2
*** END OF DOCUMENT ***
