SAF-RON GOLD
TECHNICAL PRODUCT BULLETIN #D-12
USEPA, OIL PROGRAM CENTER
ORIGINAL LISTING DATE: JANUARY 3, 2005
REVISED LISTING DATE:
"SAF-RON GOLD"
(a/k/a SF-GOLD DISPERSANT)
USEPA, OIL PROGRAM CENTER
ORIGINAL LISTING DATE: JANUARY 3, 2005
REVISED LISTING DATE:
"SAF-RON GOLD"
(a/k/a SF-GOLD DISPERSANT)
I. NAME, BRAND, OR TRADEMARK |
SAF-RON GOLD Type of Product: Dispersant |
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT |
Saf-Ron International, Inc. P.O. Box 690172 Houston, TX 77069-0172 Customer Services: Phone: (877) 853-2947 (800) 347-8950 Fax: (877) 853-2947 (480) 461-8798 24-hour Emergency Number: (877) 853-2947 Email: customer.service@saf-ron.com bruce.richards@saf-ron.com Website: www.saf-ron.com (Mr. Bruce Richards, President) |
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS |
TRK Enterprises, LLC 2530 Scottsville Road Suite 12 Bowling Green, KY 42104 Phone: (270) 782-0882 (Mr. Thomas W. Sprouse) (Mr. Karl Niles) |
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION |
1. Flammability: Non-flammable. 2. Ventilation: Special ventilation is not required. 3. Skin and eye contact; protective clothing; treatment in case of contact: No special equipment required; however, goggles are recommended. Skin contact - if irritation occurs flush with water; seek medical attention if irritation persists. Eye contact - flush with plenty of water; seek medical attention if irritation persists. 4.a. Maximum storage temperature: 120ºF 4.b. Minimum storage temperature: 32ºF 4.c. Optimum storage temperature range: 40 - 120ºF 4.d. Temperatures of phase separations and chemical changes: NA |
V. SHELF LIFE |
The shelf life is unlimited in unopened containers. |
VI. RECOMMENDED APPLICATION PROCEDURE |
1. Application Method: Information pending. 2. Concentration/Application Rate: A dispersant to oil ratio ranging from 1:50 to 1:10 is recommended. For heavy high viscosity oils - 8 gallons of SAF-RON GOLD will disperse approximately 70 gallons of crude oil or bunker C. Also for use with heavy high viscosity oils, SAF-RON GOLD can be used as a concentrate or diluted at a dispersant to water ratio of 1:10. For lighter oils, SAF-RON GOLD can be diluted at mixtures of 1:20 to 1:100. A recommended dispersant to water ratio of 1:40 can be used for most spills. Ratios are dependent upon type of oil and weather conditions. 3. Conditions for Use: Information pending. |
VII. TOXICITY AND EFFECTIVENESS | |||||||||||||||||||||||||||
a. Toxicity:
b. Effectiveness: SWIRLING FLASK DISPERSANT EFFECTIVENESS TEST WITH SOUTH LOUISIANA (S/L) AND PRUDHOE BAY (P/B) CRUDE OILS VENDOR LAB REPORT:
|
VIII. MICROBIOLOGICAL ANALYSIS |
NA |
IX. PHYSICAL PROPERTIES |
1. Flash Point, ASTM Method D-56: >100ºC 2. Pour Point, ASTM Method D-97: -2.5ºC 3. Viscosity @40ºC, ASTM Method D-445: 1.42 cSt 4. Specific Gravity @60ºF/60ºF, ASTM Method D-287: 1.014 5. pH: 8.8 6. Surface Active Agents: Proprietary blend of surface-active agents. 7. Solvents: None. 8. Additives: None. 9. Solubility: Fully water soluble. |
X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS | ||||||||||||||||||||||
|