REMARKS: |
TI 2800/027 (Inspections of Amersham Model 660 and Industrial
Nuclear Model IR-100 Exposure Devices) is issued to verify licensee compliance
with the Certificate of Compliance relating to Amersham Model 660 Series exposure
devices. The NRC became aware of specific scenarios where the Amersham Model
660 Series and the Industrial Nuclear Model IR100 radiography exposure devices
would not pass the horizontal shock test as required by 10 CFR Part 34. Retrofits
were issued by the manufacturers to correct the problem. In addition, NRC became
aware that the Amersham Model 660 Series radiography exposure device had failed
tests to meet the hypothetical conditions required in 10 CFR Part 71. The Certificate
of Compliance for this exposure device was amended to provide compensatory measures
for licensees to follow during transport, and to restrict use of Amersham Model
660 Series exposure devices manufactured after November 17, 1997. Inspections
are necessary to verify licensee compliance. |