Department of Labor Seal photos representing the workforce - digital imagery? copyright 2001 photodisc, inc.
Department of Labor Seal www.osha.gov  [skip navigational links] Search    Advanced Search | A-Z Index
Standard Interpretations
12/04/1995 - Welding, cutting, and heating near flammables.

Standard Interpretations - Table of Contents Standard Interpretations - Table of Contents
• Standard Number: 1926.352(c)

December 4, 1995

Mr. Aldo M. Gonzalez
Health and Safety Manager
The Tyree Organization
208 Route 109
Farmingdale, N.Y. 11735

Dear Mr. Gonzalez:

This is in response to your letter of October 25 to the Occupational Safety and Health Administration (OSHA) in which you request an interpretation of 29 CFR 1926.352(c). Specifically, you asked what the standard means by the phrase "presence of other flammable compounds."

As you point out in your letter, although the subject standard does not specify a minimum separation distance between flammable compounds and sources of ignition, other OSHA standards related to fire protection require a minimum separation distance of 20 to 25 feet. We have reviewed those standards and believe that the appropriate minimum separation distance for application of Section 1926.352(c) is also 20 feet (measured horizontally). However, this distance may be insufficient if the source of ignition is at a lower elevation than a heavier-than-air flammable compound and vapors can flow to the ignition source.

If you require further assistance, please do not hesitate to contact either myself or Mr. Dale Cavanaugh of my staff at (202) 219-8136.

Sincerely,

Roy F. Gurnham, P.E., J.D.
Director
Office of Construction and Maritime
Compliance Assistance


Standard Interpretations - Table of Contents Standard Interpretations - Table of Contents



Back to Top Back to Top www.osha.gov www.dol.gov

Contact Us | Freedom of Information Act | Customer Survey
Privacy and Security Statement | Disclaimers
Occupational Safety & Health Administration
200 Constitution Avenue, NW
Washington, DC 20210