![]() ![]() ![]() ![]() |
FDA Home Page | CDRH Home Page | Search | A-Z Index | ![]() |
|
![]() |
For questions regarding this document, please contact Eric Rechen at 240-276-4040 or eric.rechen@fda.hhs.gov
Additional copies are available from the Internet at: http://www.fda.gov/cdrh/ode/2237.html, or CDRH Facts-On-Demand. In order to receive this document via your fax machine, call the CDRH Facts-On-Demand system at 800-899-0381 or 301-827-0111 from a touch-tone telephone. Press 1 to enter the system. At the second voice prompt, press 1 to order a document. Enter the document number (2237) followed by the pound sign (#). Follow the remaining voice prompts to complete your request.
This guidance represents the Food and Drug Administration's (FDA's) current thinking on this topic. It does not create or confer any rights for or on any person and does not operate to bind FDA or the public. You can use an alternative approach if the approach satisfies the requirements of the applicable statutes and regulations. If you want to discuss an alternative approach, contact the FDA staff responsible for implementing this guidance. If you cannot identify the appropriate FDA staff, call the appropriate number listed on the title page of this guidance. |
FDA has developed this guidance document to help third party reviewers, i.e., accredited persons1 and European Community (EC) conformity assessment bodies (CABs),2 identify the key elements to consider when evaluating a premarket notification [510(k)] submission and documenting their review and recommendation. The review documentation summarizes the areas evaluated and the rationale for determining substantial equivalence. We believe attention to the content and format of the documentation, and particularly the review memorandum, will facilitate FDA’s timely action on the submission.
This guidance document provides FDA recommendations about conducting and documenting third party reviews of Traditional, Abbreviated, and Special 510(k) submissions. It applies to devices regulated by the Office of Device Evaluation (ODE) and in vitro diagnostic (IVD) devices regulated by the Office of In Vitro Diagnostic Device Evaluation and Safety (OIVD).
FDA's guidance documents, including this guidance, do not establish legally enforceable responsibilities. Instead, guidances describe the Agency's current thinking on a topic and should be viewed only as recommendations, unless specific regulatory or statutory requirements are cited. The use of the word should in Agency guidances means that something is suggested or recommended, but not required.
The Least Burdensome Approach
We believe we should consider the least burdensome approach in all areas of medical device regulation. This guidance reflects our careful review of the relevant scientific and legal requirements and what we believe is the least burdensome way for you to comply with those requirements. However, if you believe that an alternative approach would be less burdensome, please contact us so we can consider your point of view. You may send your written comments to the contact person listed in the preface to this guidance or to the Center for Devices and Radiological Health (CDRH) Ombudsman. Comprehensive information on CDRH's Ombudsman, including ways to contact him, can be found on the Internet at http://www.fda.gov/cdrh/ombudsman/.
CDRH provides information about the Third Party Review Program on its web site at http://www.fda.gov/cdrh/thirdparty/. This site contains links to several key resources, such as:
EC CABs should also refer to the CDRH web site on the US/EC Mutual Recognition Agreement at http://www.fda.gov/cdrh/mra/index.html. This site contains links to several key resources, such as:
Substantial equivalence and related concepts are explained in:
For information on 510(k) requirements see FDA’s Device Advice web page.
In addition, there are a number of guidances on specific devices and crosscutting scientific issues (e.g., biocompatibility, software). You may obtain these documents by using the Good Guidance Practices (GGP) database search engine.
The steps in your evaluation should be:
Each step is discussed in detail below.
Step 1. Ensuring that the device is eligible for third party review
Section 523(a)(3) of the Federal Food, Drug, and Cosmetic (FD&C) Act (21 U.S.C. 360m(a)(3)) excludes all Class III devices, as well as any Class II device that is intended to be permanently implantable, life sustaining, or life supporting, or that requires clinical data in a 510(k) submission. You should refer to the eligible device lists and the guidance on Implementation of Third Party Programs, identified above, for additional information. The contact person (identified on the cover page) for this guidance document is available to assist you when you are uncertain about the eligibility of a device. If you discover that the device you intend to review is ineligible, you should inform the submitter and discontinue your review.Step 2. Obtaining relevant FDA guidance and information
We recommend you request that the 510(k) submitter fully inform you of any substantive pre-submission communications with FDA about the device. You should also use CDRH’s web site to obtain any relevant FDA guidance, or information about the legally marketed device the submitter is comparing to or other similar devices. This information may include the Indications for Use Statement, 510(k) Summary, and FDA’s decision letter.3Step 3. Consulting, as needed, with the appropriate branch chief
We recommend that you consult, as needed, with the appropriate ODE or OIVD branch chief, team leader, or designate. These consultations can contribute to timely and consistent 510(k) reviews by identifying relevant issues and review criteria. They are particularly important for first-time reviews of devices without device-specific guidance, as discussed in the guidance on Implementation of Third Party Programs referenced above. We intend to respond promptly to your inquiries.Step 4. Screening the submission using the Screening Checklist
This step entails screening the submission to ensure that the submission is administratively complete. You should use the Screening Checklist, found on FDA’s web page. If the submission is complete, it is ready for substantive review. If you identify any deficiencies, see Step 6. Identifying Deficiencies.If the 510(k) submission refers to information in a Master File, you should contact the 510(k) Staff, ODE, at 301-594-1190.
Step 5. Conducting the substantive review
Substantive review focuses on substantial equivalence. Section 513(i) of the FD&C Act (21 U.S.C. 360c(i)) discusses the meaning of substantial equivalence. Guidance on the CDRH Premarket Notification Review Program 6/30/86 (K86-3) explains the key points underlying substantial equivalence determinations. The guidance, The New 510(k) Paradigm - Alternate Approaches to Demonstrating Substantial Equivalence in Premarket Notifications, describes alternative approaches to determining substantial equivalence using Abbreviated and Special 510(k) submissions. Guidance on the Use of Standards in Substantial Equivalence Determinations further explains how standards are used in 510(k) review. You should refer to these guidances in conducting your substantive review (see Section 2, above).If you identify any deficiencies, you should contact the submitter. Step 6. Identifying Deficiencies of this guidance provides further instruction on how to identify deficiencies in a submission. When your substantive review is complete you should reach a conclusion on whether the submission has demonstrated substantial equivalence. Section 21 CFR 807.100(b) sets forth the criteria FDA uses to determine that a device is substantially equivalent.
Step 6. Identifying deficiencies
If you identify any deficiencies in the submission, you will need to contact the 510(k) submitter. You may use whatever form of communication, i.e., telephone, facsimile, electronic mail, or letter, you wish to resolve the matter as long as confidentiality can be maintained. You should, however, avoid the exchange of substantive data and information over the telephone to avoid errors that may arise in the absence of a written request and response. We recommend that you document your requests in writing and summarize in your review memorandum any modifications the submitter has made to the submission.When requesting additional information from the 510(k) submitter, we recommend that you structure your requests in the following manner. Examples of well-constructed deficiencies and responses to FDA’s requests are available in the guidance entitled, Suggested Format for Developing and Responding to Deficiencies in Accordance with the Least Burdensome Provisions of FDAMA, http://www.fda.gov/cdrh/modact/guidance/1195.html.
Your request should include:
- the aspect of the submission that is deficient or absent
- the reason you are requesting this information
- your recommendation about what should be submitted to adequately address the deficiency.
You should consider alternative approaches to address deficiencies.
Step 7. Documenting your review
Once you have reached a conclusion on substantial equivalence, you should prepare your review documentation. Title 21 CFR 10.70 (“Documentation of significant decisions in administrative file”) provides a framework for documentation. The content of your documentation will vary based on the type of 510(k) submission and device. The review formats identified in the table below are the internal tools we typically use for each submission type shown. These tools may assist you in preparing your review documentation.FDA Review Formats for Devices Other Than IVDs
Submission Type Review Formats Screening Checklist 510(k) Decision-Making Documentation ODE Review Memorandum for Traditional and Abbreviated Submissions Standards Data Sheet Special 510(k) Device Modification Review Memo Traditional yes yes yes no no Abbreviated yes yes yes yes no Special yes yes no no yes FDA Review Formats for IVD Devices
Submission Type Review Formats Screening Checklist 510(k) Decision-Making Documentation OIVD Review Templates Standards Data Sheet Special 510(k) Device Modification Review Memo Traditional yes yes yes no no Abbreviated yes yes yes yes no Special yes yes no no yes Each format is discussed below.
Screening Checklist
See Step 4 above.510(k) Decision-Making Documentation
FDA uses this format to document the key decision points leading to a determination on substantial equivalence, as discussed in Guidance on the CDRH Premarket Notification Review Program 6/30/86 (K86-3). See Appendix 1.ODE Review Memorandum for Traditional and Abbreviated 510(k) Submissions
See Appendix 2.Standards Data Sheet
FDA uses the Standards Data Sheet to identify each standard relied upon in an Abbreviated 510(k) submission. See Appendix 5.Special 510(k) Device Modification Review Memo
FDA uses the Special 510(k) Device Modification Review Memo to summarize the information in a Special 510(k) submission and FDA’s recommendation on substantial equivalence. See Appendix 4.OIVD Review Templates
Templates and instructions provided to FDA staff for the review of IVD devices are in Appendix 3 (sections A, B, and C). Numerous examples of completed templates are available on the OIVD web page.
Upon completing your review, you should organize your Third Party Submission as follows. It should include the following items, individually tabbed, in the order shown:
The cover letter, identified above, should contain:
You should submit 2 copies, each copy in a separate jacket, to FDA at the address below:
CDRH Document Mail Center
Mail Stop: HFZ-401
Attention: THIRD PARTY REVIEW
9200 Corporate Boulevard
Rockville, Maryland 20850 USA.
You should clip a copy of the most recent version of the 510(k) Summary, if any, and the Indications for Use Statement to the inside front cover. The originals should remain in the 510(k) submission. |
After we receive your Third Party Submission, if we believe additional information is needed to make a substantial equivalence determination, we plan to promptly contact you. Generally, we will request any additional information by telephone, electronic mail, or facsimile. Our requests will describe our concerns and recommend the information that we believe we need to address our concerns. In addition, if we place the 510(k) submission “on hold” (i.e., officially suspend processing of the submission pending our receipt of additional information), we plan to send you a “hold” letter by mail.
Once you receive our request for additional information, you should:
1. inform the 510(k) submitter of requests pertaining to the 510(k) submission
2. thoroughly review any additional information provided to you by the 510(k) submitter to ensure that it adequately responds to our concerns
3. revise your review documentation to resolve any deficiencies we identified in your previously submitted documentation
4. add or incorporate your review of the additional information, if any, provided by the 510(k) submitter
5. prepare a cover letter referencing the 510(k) number assigned by FDA and identifying the purpose of your submission
6. send (in duplicate) the cover letter, your additional or revised review documentation, and any additional information received from the 510(k) submitter to the address shown in Section 4 above4
We have developed a guidance document that provides an overview of dispute resolution processes for medical devices.5 The processes available for reviewing and reconsidering FDA decisions or actions on other 510(k) submissions are also available for Third Party Submissions.
We believe disputes are often the result of misunderstanding or miscommunication. We encourage you to seek clarification, as needed, from us or the 510(k) submitter during the course of a review. We are available to participate in a telephone conference or meeting with you, or with both you and the 510(k) submitter, if this appears to be an expeditious way to resolve questions or concerns. If the 510(k) submitter disagrees with an FDA decision or action, you should maintain impartiality and exercise care to avoid the appearance of conflict of interest that may result from acting as an advocate on the 510(k) submitter’s behalf.
Current Page: Guidance Document | Next Page: Appendix 1 |
1 Under Section 523 of the Federal Food, Drug, and Cosmetic Act. (Return)
2 Parties designated under the Sectoral Annex on Medical Devices to the US/EC Mutual Recognition Agreement, as described in 21 CFR Part 26. (Return)
3 Indications for Use Statements, 510(k) Summaries, and FDA decision letters from cleared submissions may be found in FDA’s 510(k) database using the search engine at http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfPMN/pmn.cfm. The GGP database search engine allows users to search the inventory of guidances available by title words or origin, at http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfggp/search.cfm. (Return)
4 The guidance, Fax & E-mail Communication with Industry about Premarket Files Under Review, describes FDA’s practices and procedures for information submitted by facsimile or electronic mail. You should refer to this guidance at http://www.fda.gov/cdrh/ode/a02-01.html. (Return)
5 See Medical Device Appeals and Complaints – Guidance on Dispute Resolution at http://www.fda.gov/cdrh/modact/dispresl.pdf. (Return)
Updated September 30, 2004
CDRH Home Page | CDRH A-Z Index | Contact CDRH | Accessibility | Disclaimer
FDA Home Page | Search FDA Site | FDA A-Z Index | Contact FDA | HHS Home Page
Center for Devices and Radiological Health / CDRH