Technology Services, National Voluntary Laboratory Accreditation Program, NIST Go to Technology Services Home Page Go to NIST Home Page Go to National Voluntary Laboratory Accreditation Program Home Page Go to Directory of Accredited Laboratories Go to Fields of Accreditation Go to Publications/Applications Go to Mutual Recognition Arrangements Go to Assessor Resources Contact National Voluntary Laboratory Accreditation Program

Directory of Accredited Laboratories


CALIBRATION LABORATORIES


Mechanical


The Calibration Laboratories Accreditation Program was established in response to a request from the National Conference of Standards Laboratories (NCSL). Under the Calibration Laboratories LAP, laboratories are accredited to perform calibrations, at specified ranges and uncertainties, in one or more of the eight fields of calibration covering in excess of eighty parameters. To become accredited, laboratories must meet the requirements set forth in NIST Handbook 150, 'NVLAP Procedures and General Requirements.' NIST Handbook 150-2G, 'Calibration Laboratories Technical Guide for Mechanical Measurements,' was developed to assist laboratories in achieving accreditation by providing guidelines for good calibration laboratory practices. Click on the links to view NIST Handbook 150-2G and its associated documents, Lab Bulletin LB-9-2003 and Summary Report of an Ad Hoc Focus Group Meeting on: Magnetism in Mass Measurements.

Calibration laboratories are accredited by NVLAP for compliance with the general requirements of ISO/IEC 17025, 'General requirements for the competence of testing and calibration laboratories.' Laboratories wishing to do so may also be evaluated and recognized for compliance to ANSI/NCSL Z540-1, 'Calibration Laboratories and Measuring and Test Equipment - General Requirements', Part 1. This will require that the laboratory address those requirements of ANSI/NCSL Z540-1-1994 that are not sufficiently addressed by ISO/IEC 17025. A short checklist is provided at Supplemental Checklist for Verification of Compliance to ANSI/NCSL Z540-1-1994, Part 1.

Listed below are all laboratories accredited as of January 8, 2009, to perform calibrations in the field of Mechanical Measurements, for the specific parameters, ranges and uncertainties listed in their scope of accreditation. See NIST Handbook 150-2G for a list of the parameters available within this field.

The scopes of accreditation have been scanned and saved as PDF documents. To view the scopes for the following laboratories, you must have Adobe Acrobat Reader (tm) loaded on your computer. You may download this viewer for free on all platforms from the Adobe Acrobat web site.

If you are unable to load and use Adobe Acrobat Reader, please e-mail NVLAP at NVLAP@nist.gov, or call NVLAP at (301) 975-4016.


Return to NVLAP Program Listing

AZ
Arizona Department of Weights and Measures Metrology Laboratory, Glendale, AZ [200381- 0]
FTI Flow Technology, Inc., Tempe, AZ [200799- 0]
Flow Dynamics, Inc., Scottsdale, AZ [200668- 0]
Tovey Engineering, Inc., Phoenix, AZ [200662- 0]
CA
Rainin Instrument LLC Oakland, CA Pipette Service, Oakland, CA [200638- 0]
Rainin Instrument LLC San Diego, CA Pipette Service, San Diego, CA [200793- 0]
Southern California Edison Company, Westminster, CA [105014- 0]
State of California Metrology Laboratory, Sacramento, CA [200791- 0]
United Calibration Corporation, Huntington Beach, CA [200521- 0]
CO
Colorado Engineering Experiment Station Inc., Nunn, CO [200377- 0]
Sartorius TCC Company, dba Sartorius or Denver Instrument, Arvada, CO [200106- 0]
FL
Florida Department of Agriculture Metrology Laboratory, Tallahassee, FL [200560- 0]
Insco Metrology, Inc., Miami, FL [200508- 0]
GA
SWFLANT Metrology Laboratory Operated by Lockheed Martin, Kings Bay, GA [200403- 0]
IL
S. Himmelstein and Company, Hoffman Estates, IL [200487- 0]
IN
Eli Lilly and Company Corporate Standards Lab, Indianapolis, IN [200717- 0]
Indiana Division of Weights and Measures, Indianapolis, IN [200421- 0]
MA
Alden Research Laboratory, Inc., Holden, MA [200798- 0]
David L. Ellis Co., Incorporated, Acton, MA [200127- 0]
Gilmore Diamond Calibration Laboratory, Attleboro, MA [200538- 0]
Instron Calibration Laboratory, Norwood, MA [200301- 0]
Rainin Instrument LLC Woburn, MA Pipette Service, Woburn, MA [200637- 0]
MD
Maryland Department of Agriculture, Weights and Measures Sec., Annapolis, MD [200494- 0]
National Standards Testing Laboratory, Rockville, MD [200663- 0]
Scantek, Inc. Calibration Laboratory, Columbia, MD [200625- 0]
ME
Maine Department of Agriculture Metrology Laboratory, Augusta, ME [200414- 0]
MI
Michigan Dept. of Agriculture, E.C. Heffron Metrology Laboratory, Williamston, MI [200408- 0]
MN
Minnesota Metrology Laboratory, Burnsville, MN [105003- 0]
MO
Honeywell FM&T Metrology, Kansas City, MO [200108- 0]
NC
North Carolina Standards Laboratory, Raleigh, NC [200495- 0]
NH
New Hampshire Metrology Laboratory, Concord, NH [200649- 0]
NJ
Bios International Corporation, Butler, NJ [200661- 0]
Dwight Calibration & Instrument LLC, Lyndhurst, NJ [200405- 0]
Henry Troemner, LLC, Thorofare, NJ [105013- 0]
NM
New Mexico Department of Agriculture, Las Cruces, NM [200647- 0]
Sandia National Laboratories, Albuquerque, NM [105002- 0]
NY
NYS Bureau of Weights & Measures Metrology Laboratory, Albany, NY [200464- 0]
OH
Norbar Torque Tools Inc., Torque Specialist, Willoughby, OH [200596- 0]
State of Ohio Metrology Laboratory, Reynoldsburg, OH [200420- 0]
OK
Oklahoma Bureau of Standards, Oklahoma City, OK [200396- 0]
OR
Oregon Dept. of Agriculture Meas. Standards Div. Metrology Lab., Salem, OR [200468- 0]
PA
Cameron Measurement Systems, Coraopolis, PA [200813- 0]
PR
National Standards of Puerto Rico, Rio Piedras, PR [200454- 0]
TN
Oak Ridge Metrology Center, Oak Ridge, TN [105000- 0]
ORNL Metrology Laboratory, Oak Ridge, TN [200659- 0]
TX
GE Infrastructure Sensing, Houston, TX [200491- 0]
Transcat - Houston, Houston, TX [200730- 0]
VA
Unified Industries Incorporated Standards Laboratory, Springfield, VA [200597- 0]
State of Virginia Metrology Lab, Richmond, VA [105007- 0]
WA
Strategic Weapons Fac. Pacific Cal. Lab. Oper. by Lockheed Martin, Silverdale, WA [200406- 0]
Washington State Department of Agriculture Metrology Laboratory, Tumwater, WA [200446- 0]
WI
Rice Lake Weighing Systems, Rice Lake, WI [105001- 0]
CANADA
Rainin Instrument LLC Mississauga, Ontario Pipette Service, Mississauga, Ontario L5N 8G6, CANADA [200857- 0]
United Testing Sys. Canada, Ltd., CONCORD ONT L4K 1K7, CANADA [200311- 0]
JAPAN
Rainin Instrument LLC Tokyo, Japan Pipette Service, Tokyo, 113-0033, JAPAN [200842- 0]


Return to top of page NVLAP Home | Accredited Laboratories | Fields of Accreditation | Publications/Applications |
Mutual Recognition Arrangements | Assessor Resources | Contact NVLAP Return to top of page

For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:

National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov

Date created: July 26, 2002
Last Updated: January 8, 2009

Privacy Statement / Security Notice / Accessibility Statement | Disclaimer | FOIA