| Patents > Search Colections > MPEP > 817 Outline of Letter for Restriction Requirement [R-5] - 800 Restriction in Applications Filed Under 35 U.S.C. 111; Double Patenting |
|
|
|
Go to MPEP - Table of Contents
817 Outline of Letter for Restriction Requirement [R-5] - 800 Restriction in Applications Filed Under 35 U.S.C. 111; Double Patenting
817 Outline of Letter for Restriction Requirement [R-5]
The following outline should be used to set forth a requirement to restrict.
OUTLINE OF RESTRICTION REQUIRE-MENT
(A) Statement of the requirement to restrict and that it is being made under 35 U.S.C. 121
(1) Identify each group by Roman numeral.
(2) List claims in each group. Check accuracy of numbering of the claims; look for same claims in two groups; and look for omitted claims.
(3) Give short description of total extent of the subject matter claimed in each group, pointing out critical claims of different scope and identifying whether the claims are directed to a combination, subcombination, process, apparatus, or product.
(4) Classify each group.
Form paragraphs 8.08- 8.11 should be used to group inventions.
¶ 8.08 Restriction, Two Groupings
Restriction to one of the following inventions is required under 35 U.S.C. 121:
I. Claim [1], drawn to [2], classified in class [3], subclass [4].
II. Claim [5], drawn to [6], classified in class [7], subclass [8].
¶ 8.09 Restriction, 3rd Grouping
III. Claim [1], drawn to [2], classified in class [3], subclass [4].
¶ 8.10 Restriction, 4th Grouping
IV. Claim [1], drawn to [2], classified in class [3], subclass [4].
¶ 8.11 Restriction, Additional Groupings
[1]. Claim[2], drawn to [3], classified in class [4], subclass [5].
Examiner Note
In bracket 1, insert the appropriate roman numeral, e.g., --V--, --VI--, etc.
If restriction is required between species, form paragraph 8.01 or 8.02 should be used to set forth the patentably distinct species and reasons for holding the species are independent or distinct. See MPEP § 809.02(a).
(B) Take into account claims not grouped, indicating their disposition.
(1) Linking claims
(i) Identify
(ii) Statement of groups to which linking claims may be assigned for examination
(2) Other ungrouped claims
(3) Indicate disposition, e.g., improperly dependent, canceled, etc.
(C) Allegation of independence or distinctness
(1) Point out facts which show independence or distinctness
(2) Treat the inventions as claimed, don't merely state the conclusion that inventions in fact are independent or distinct, e.g.,
(i) Subcombination - Subcombination disclosed as usable together Each usable alone or in other identified combination Demonstrate by examiner's suggestion
(ii) Combination - Subcombination Combination as claimed does not require subcombination AND Subcombination usable alone or in other combination Demonstrate by examiner's suggestion
(iii) Process - Apparatus Process can be carried out by hand or by other apparatus Demonstrate by examiner's suggestion OR Demonstrate apparatus can be used in other process (rare).
(iv) Process of making and/or Apparatus for making - Product made Claimed product can be made by other process (or apparatus) Demonstrate by examiner's suggestion OR Demonstrate process of making (or apparatus for making) can produce other product (rare)
(D) Provide reasons for insisting upon restriction
(1) Separate status in the art
(2) Different classification
(3) Same classification but recognition of divergent subject matter
(4) Divergent fields of search, or
(5) Search required for one group not required for the other
(E) Summary statement
(1) Summarize (i) independence or distinctness and (ii) reasons for insisting upon restriction
(2) Include paragraph advising as to reply required
(3) Indicate effect of allowance of linking claims, if any present
(4) Indicate effect of cancellation of evidence claims (see MPEP § 806.05(c))
(5) Indicate effect of allowance of product claims if restriction was required between a product and a process of making and/or using the product.
Form paragraphs 8.14- 8.20.02 may be used as appropriate to set forth the reasons for the holding of independence or distinctness. Form paragraph 8.13 may be used as a heading.
¶ 8.13 Distinctness (Heading)
The inventions are independent or distinct, each from the other because:
Examiner Note
This form paragraph should be followed by one of form paragraphs 8.14- 8.20.02 to show independence or distinctness.
One of form paragraphs 8.21.01 through 8.21.03 must be used at the conclusion of each restriction requirement.
**>¶ 8.21.01 Conclusion to All Restriction Requirements: Different Classification
Because these inventions are independent or distinct for the reasons given above and there would be a serious burden on the examiner if restriction is not required because the inventions have acquired a separate status in the art in view of their different classification, restriction for examination purposes as indicated is proper.
Examiner Note
THIS FORM PARAGRAPH (OR ONE OF FORM PARAGRAPHS 8.21.02 OR 8.21.03) MUST BE ADDED AS A CONCLUSION TO ALL RESTRICTION REQUIREMENTS employing any of form paragraphs 8.01, 8.02, or 8.14 to 8.20.03.
¶ 8.21.02 Conclusion to All Restriction Requirements: Recognized Divergent Subject Matter
Because these inventions are independent or distinct for the reasons given above and there would be a serious burden on the examiner if restriction is not required because the inventions have acquired a separate status in the art due to their recognized divergent subject matter, restriction for examination purposes as indicated is proper.
Examiner Note
THIS FORM PARAGRAPH (OR ONE OF FORM PARAGRAPHS 8.21.01 OR 8.21.03) MUST BE ADDED AS A CONCLUSION TO ALL RESTRICTION REQUIREMENTS employing any of form paragraphs 8.01, 8.02, or 8.14 to 8.20.03.
¶ 8.21.03 Conclusion to All Restriction Requirements: Different Search
Because these inventions are independent or distinct for the reasons given above and there would be a serious burden on the examiner if restriction is not required because the inventions require a different field of search (see MPEP § 808.02), restriction for examination purposes as indicated is proper.
Examiner Note
THIS FORM PARAGRAPH (OR ONE OF FORM PARAGRAPHS 8.21.01 OR 8.21.02) MUST BE ADDED AS A CONCLUSION TO ALL RESTRICTION REQUIREMENTS employing any of form paragraphs 8.01, 8.02,or 8.14 to 8.20.03.
<Form paragraph 8.23.02 must be included in all restriction requirements for applications having joint inventors.
¶ 8.23.02 Joint Inventors, Correction of Inventorship
Applicant is reminded that upon the cancellation of claims to a non-elected invention, the inventorship must be amended in compliance with 37 CFR 1.48(b) if one or more of the currently named inventors is no longer an inventor of at least one claim remaining in the application. Any amendment of inventorship must be accompanied by a request under 37 CFR 1.48(b) and by the fee required under 37 CFR 1.17(i).
Examiner Note
This form paragraph must be included in all restriction requirements for applications having joint inventors.
The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website. |
|
|
Go to MPEP - Table of Contents
=online
business system 
=fees 
=forms
=help 
=laws/regulations 
=definition
(glossary)