1917.3(a) -
1917.3(a)(1) The standards of agencies of the U.S. Government, and organizations which are not agencies of the U.S. Government which are incoporated by reference in this part, have the same force and effect as other standards in this part. Only the mandatory provisions (i.e. provisions containing the word "shall" or other mandatory language) of standards incorporated by reference are adpoted as standards under the Occupational Safety and Health Act.
1917.3(a)(2) Any changes in the standards incorporated by reference in this part and an official historic file of such changes are available for inspection at the national office of the Occupational Safety and Health Administration, U.S. Department of Labor, Washington, DC 20210.
1917.3(a)(3) The materials listed in paragraph (b) of this section are incorporated by reference in the corresponding sections noted as they exist on the date of the approval, and a notice of any change in these materials will be published in the Federal Register. These incoporations by reference (IBRs) were approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and in 1 CFR part 51.
1917.3(a)(4) Copies of the following standards that are issued by the respective private standards organizations may be obtained from the issuing organizations. The materials are available for purchase at the corresponding addresses of the private standards organizations noted in paragraph (b) of this section. In addition, all are available for inspection at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington DC, and through the OSHA Docket Office, room N2625, U.S. Department of Labor, 200 Constitution Ave., Washington, DC 20210, or any of OSHA's regional offices.
1917.3(b) The following material is available for purchase from the American National Standards
Institute (ANSI), 11 West 42nd St., New York, NY 10036:
1917.3(b)(1) ANSI A14.1-1990, Safety Requirements for Portable Wood Ladders; IBR approved for §
1917.119(c).
1917.3(b)(2) ANSI A14.2-1990, Safety Requirements for Portable Metal Ladders; IBR approved for §
1917.119(c).
1917.3(b)(3) ANSI A14.5-1992, Safety Requirements for Portable Reinforced Plastic Ladders; IBR
approved for § 1917.119(c).
1917.3(b)(4)ANSI Z-87.1-1989, Practice for Occupational and Educational Eye and Face
Protection; IBR approved for § 1917.91(a)(1).
1917.3(b)(5)ANSI Z-89.1-1986, Personnel Protection-Protective Headwear for Industrial
Workers-Requirements; IBR approved for § 1917.93(b).
1917.3(b)(6) ANSI Z-41-1991, American National Standard for Personal Protection-Protective
Footwear; IBR approved for § 1917.94(b).
1917.3(b)(7) ASME B56.1, 1959, Safety Code for powered Industrial Trucks, pages 8 and 13; IBR approved for § 1917.50(j)(1).
[62 FR 40141, July 25, 1997; 65 FR 40938, June 30, 2000] |