1918.3(a)
-
1918.3(a)(1) The standards of agencies of the U.S. Government, and
organizations which are not agencies of the U.S. Government which are
incorporated by reference in this part, have the same force and effect
as other standards in this part. Only the mandatory provisions (i.e.
provisions containing the word "shall" or other mandatory language)
of standards incorporated by reference are adopted as standards under
the Occupational Safety and Health Act.
1918.3(a)(2) Any changes in the standards incorporated by reference in this
part and an official historic file of such changes are available for
inspection at the national office of the Occupational Safety and Health
Administration, U.S. Department of Labor, Washington, DC 20210.
1918.3(a)(3) The materials listed in paragraph (b) of this section are
incorporated by reference in the corresponding sections noted as they
exist on the date of the approval, and a notice of any change in these
materials will be published in the Federal Register. These
incorporations by reference (IBRs) were approved by the Director of the
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51.
1918.3(a)(4) Copies of the following standards that are issued by the
respective private standards organizations may be obtained from the
issuing organizations. The materials are available for purchase at the
corresponding addresses of the private standards organizations noted in
paragraph (b) of this section. In addition, all are available for
inspection at the Office of the Federal Register, 800 North Capitol
Street, NW., suite 700, Washington DC, and through the OSHA Docket
Office, room N2625, U.S. Department of Labor, 200 Constitution Ave.,
Washington, DC 20210, or any of OSHA's regional offices.
1918.3(b) The following material is available for purchase from the
American National Standards Institute (ANSI), 11 West 42nd St., New
York, NY 10036:
..1918.3(b)(1)
1918.3(b)(1) ANSI A14.1-1990, Safety Requirements for Portable Wood Ladders;
IBR approved for 1918.24(g)(1).
1918.3(b)(2) ANSI A14.2-1990, Safety Requirements for Portable Metal
Ladders; IBR approved for 1918.24(g)(2).
1918.3(b)(3) ANSI A14.5-1992, Safety Requirements for Portable Reinforced
Plastic Ladders; IBR approved for 1918.24(g)(3).
1918.3(b)(4) ANSI Z-87.1-1989, Practice for Occupational and Educational Eye
and Face Protection; IBR approved for 1918.101(a)(1).
1918.3(b)(5) ANSI Z-89.1-1986, Personnel Protection-Protective Headwear for
Industrial Workers-Requirements; IBR approved for 1918.103(b).
1918.3(b)(6) ANSI Z-41-1991, American National Standard for Personal
Protection-Protective Footwear; IBR approved for 1918.104(b).
[62 FR 40141, July 25, 1997]
|