Jump to main content.


 Basic Information

 
Basic Information Verification
Process
Vendors
Wanted
How
to Apply
Organization

How to Apply



Advanced Monitoring Systems Center
To have your monitoring technology considered, complete the Application for Technology Verification 2008 (PDF) (5 pp, 35 KB) form and submit to:

Ann Louise Sumner
Advanced Monitoring Systems Center Verification Test Coordinator
Battelle
505 King Ave.
Columbus, OH 43201-2693
(614) 424-3973
Fax: (614) 458-3973
Email: ETV-AMSCenter@battelle.org

Additional Information

Douglas Grosse
Project Officer
U.S. Environmental Protection Agency
(513) 569-7844

Top of page


Air Pollution Control Technology Center
To have your air pollution control technology considered, complete the Request for Verification (PDF) (2 pp, 28 KB) form and submit to:

Jenia A. Tufts
RTI International
Center for Aerosol Technology
Aerosol Physics Group
3040 Cornwallis Road
Research Triangle Park, NC 27709
(919) 485-2698
Fax: (919) 541-6936

APCT Center Vendor Guide for Verification of Mobile Source Retrofit Emissions Controls (PDF) (6 pp, 72 KB) April 2007

Additional Information

Mike Kosusko
Project Officer
U.S. Environmental Protection Agency
(919) 541-2734

Top of page


Drinking Water Systems Center
To have your drinking water systems technology considered or if you are interested in becoming an NSF International-qualified testing organization, visit NSF International Exit EPA Disclaimer or contact:

Bruce Bartley
NSF International
(734) 769-5148
Fax: (734) 827-7160

Additional Information

Jeff Adams
Project Officer
U.S. Environmental Protection Agency
(513) 569-7835

Top of page


Greenhouse Gas Technology Center
To have your greenhouse gas technology considered, complete the Application for Testing (PDF) (5 pp, 80 KB) Exit EPA Disclaimer form and submit to:

Southern Research Institute (SRI International)
5201 International Dr.
Durham, NC 27712

Contact: Tim Hansen
(919) 282-1052
Fax: (919) 282-1060

Additional Information

Lee Beck
Project Officer
U.S. Environmental Protection Agency
(919) 541-0617

Top of page


Water Quality Protection Center
To have your water quality protection technology considered, or if you are interested in becoming an NSF International-qualified testing organization, visit NSF International Exit EPA Disclaimer or contact:

Thomas Stevens
NSF International
(734) 469-5347
Fax: (734) 769-5195

Additional Information

Ray Frederick
Project Officer
U.S. Environmental Protection Agency
(732) 321-6627

Top of page


Environmental and Sustainable Technology Evaluations
Verification of Qualitative Spot Test Kits for Lead in Paint

The EPA Lead Renovation Repair and Painting (RRP) rule (PDF) (79 pp, 847 KB) includes a two phase process for evaluating and recognizing test kits that can be used to determine the presence of regulated levels of lead in lead-based paint surfaces.

EPA’s Office of Pollution Prevention and Toxics (OPPT) will begin accepting applications for the first phase of the evaluation and recognition process (the 5% false negative rate) on September 1, 2008.  Test kits must be presently commercially available to go through this evaluation process.  Test kits will be evaluated using a protocol developed by the National Institute of Standards and Technology (NIST) and used in the NIST report entitled, “Spot Test Kits for Detecting Lead in Household Paint: A Laboratory Evaluation.”  If vendors have an existing test kit that is commercially available and would like to have it evaluated for the purpose of being recognized by EPA as meeting the 5% false negative rate, please go to http://www.epa.gov/lead/pubs/testkit.htm for the application process and requirements.

For additional information on Phase 1 testing, contact:

Sam Brown
U. S. Environmental Protection Agency
Office of Pollution Prevention and Toxics
Phone: 202-566-0490         

The RRP rule also identifies the ETV Program for obtaining independent laboratory validation of test kit performance. ETV will verify test kits based on the criteria established for the second phase evaluation process (5% false negative and 10% false positive standards).  For more information on the recognition process of the Phase 2 testing, please go to http://www.epa.gov/lead/pubs/testkit.htm. ETV expects to begin to solicit vendors for Phase 2 testing in April 2009. ETV will post additional information on the verification testing of the improved test kits on the ETV Web Site at www.epa.gov/etv/este.html in the near future.  

For additional information on the ETV ESTE testing, contact:

Julius Enriquez
ETV Project Officer
U.S. Environmental Protection Agency
(513) 569-7285

Top of page


See Also
Verification Process
Vendors Wanted
Verified Technologies
Verification Centers

You will need Adobe Reader to view some of the files on this page.
See EPA's PDF page to learn more.


Local Navigation


Jump to main content.